Name: 29th Symposium on Fusion Technology (SOFT 2016)
Start: 2016-09-05T08:00:00+02:00
End: 2016-09-09T14:20:00+02:00
Location: Prague Congress Centre

Redha Abdeddaim (Institut Fresnel, Aix-Marseille Université, CNRS, Centrale Marseille, UMR 7249, F-13013, Marseille, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Walid Abdel Maksoud (CEA, GIF SUR YVETTE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Walid Abdel Maksoud (IRFU/SACM, CEA, Centre de Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Walid Abdel-Maksoud (IRFU, CEA, Gif-sur-Yvette, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

G. Abdrashitov (Budker Institute of Nuclear Physics, Novosibirsk 630090, Russian Federation)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Ganji Abe (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Jordi Abella (Analytical and Applied Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.165 Amperometric hydrogen sensors for molten metals

Jordi Abella (Analytical Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.192 Lithium conducting ceramics for amperometric sensors in molten metals

Mitul Abhangi (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

Ali Abou-Sena (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.118 Characterization of the cooling channels of First Wall Mock-up dedicated to the HCPB-TBM qualification

T. Abrams (Oak Ridge Institute for Science and Education, Oak Ridge, TN, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Joelle Achard (IRFM, CEA, Saint Paul Lez Durance Cedex, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Jiri Adamek (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Joseph Adegun (University of Saskatchewan, 116 Science Place, Saskatoon, SK S7N 5E2, Canada)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Joseph Adegun (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Gilbert Agarici (Fusion for Energy F4E, Barcelona, Spain)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Jyoti Agarwal (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Nancy Ageorges (Kampf Telescope Optics, Munich, Germany)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic
Co-author in P4.055 Load specification and vibration test of the ITER equatorial port H-alpha diagnostic dogleg mirror
Co-author in P4.056 Design & analysis process and implications on the optical performance

Piero Agostinetti (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Piero Agostinetti (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.021 Multi-design innovative cooling research & optimization (MICRO):novel proposals for high performance cooling in DEMO

Piero Agostinetti (Consorzio RFX, I-35127 Padova, Italy)

Co-author in P2.007 The DTT device: systems for heating

Piero Agostinetti (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Piero Agostinetti (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P2.144 Application of the VTTJ cold junction technique to fusion reactor relevant geometry and materials

Pietro Agostini (ENEA CR Brasimone, Località Brasimone 40032, Camugnano (BO), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Jyoti Agrawal (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Diogo Eloi Aguiam (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

D. Aguiam (Instituto de Plasmas e Fusão Nuclear, IST, 1037-001 Lisboa, Portugal)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

W.-K. Ahn (Department of Physics, Sogang University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Do-Hee Ahn (nuclear fuel cycle process development, KAERI(Korea Atomic Energy Research Institute), Yuseong, Daejeon, South Korea;quantum energy chemical engineering, UST(University of science&technology), 217, Gajeong-ro, Yuseong-gu, Daejeon, 34113, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Do-Hee Ahn (University of Science and Technology (UST), 217 Gajeongro, Yuseong, Daejeon, South Korea;Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeokdaero, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Mu-Young Ahn (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Mu-Young Ahn (NFRI, Daejeon, South Korea)

Co-author in P1.192 Sample holder design for effective thermal conductivity measurement of pebble-bed using laser flash method

Mu-Young Ahn (Nuclear Fusion Engineering Development Department, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P2.135 Components Design and Performance Analysis for the Preliminary Design of HCCR TBM-set

Hee-Jae Ahn (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

H.J. Ahn (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Hee-Jae Ahn (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Hee-Jae Ahn (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Mu-Young Ahn (TBM Technology Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process

Hee-Jae Ahn (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

Hee Jae Ahn (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Hyeon-Sik Ahn (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Nobuyuki Aiba (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Gaetano Aiello (Karlsruhe Institute of Technology, D-76021 Karlsruhe, Germany)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Gaetano Aiello (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Gaetano Aiello (Institute for Applied Materials - Applied Materials Physics (IAM-AWP), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Giacomo Aiello (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Giacomo Aiello (Department of Systems and Structures Modelling, CEA, Gif-sur-Yvette, France)

Co-author in P1.171 Nuclear analysis of the HCLL blanket for the European DEMO

Gaetano Aiello (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Giacomo Aiello (DEN, DM2S , CEA Saclay, Gif-sur-Yvette, France)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Giacomo Aiello (DEN, DM2S, SEMT, CEA-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Giacomo Aiello (CEA, Saclay, France)

Co-author in P3.127 Initial definition of load conditions in DEMO

Mart Aints (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

P. Ajesh (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Rob Akers (UKAEA-CCFE, Abingdon, United Kingdom)

Co-author in P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling

Robert Akers (Theory and Modelling, CCFE, Abingdon, United Kingdom)

Co-author in P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE

Tonegawa Akira (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Co-author in P4.112 Experimental simulation of super-X divertor for detached plasma by TPD-Sheet IV

Masafumi Akiyoshi (Radiation Research Center, Osaka Prefecture University, Osaka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Jarir Aktaa (Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe, Germany)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Jarir Aktaa (Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Md Mahbub Alam (Advanced Energy Engineering Science, IGSES, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Md Mahbub Alam (AEES, IGSES, Kyushu University, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Ferran Albajar (Fusion for Energy, Barcelona, Spain)

Ferran Albajar (European Joint Undertaking for ITER and the Development of Fusion Energy (F4E), Barcelona, E-08019, Spain)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Raffaele Albanese (DIETI, Consorzio CREATE, Univ. Napoli Federico II, 80125 Napoli, Italy)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Raffaele Albanese (Dept. Of Electric Engineering and Information Tehcnology, Univ. Di Napoli “Federico II”, Napoli, Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

R. Albanese (on behalf of the EUROfusion WPDTT2 team & the DTT report contributors, Consorzio CREATE & DIETI - Univ. Napoli Federico II, via Claudio 21, I-80125 Napoli, Italy)

Co-author in I5.3 Design and definition of a Divertor Tokamak Test facility

Raffaele Albanese (DIETI, University of Naples Federico II, via Claudio 21, I-80125, Napoli, Italy;CREATE-ENEA, via Claudio 21, I-80125, Napoli, Italy)

Co-author in P2.005 The DTT device: alternative configurations

Gorka Alberro (Nuclear Engineering and Fluid Mechanics, University of the Basque Country (UPV/EHU), Bilbao, Spain)

Co-author in P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi

Stefano Alberti (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Stefano Alberti (SPC, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Stefano Alberti (Swiss Plasma Center (SPC), EPFL, Lausanne, Switzerland)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Di Zenobio Aldo (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Daniel Alegre (Departamento de Ingeniería Energética, UNED, C/ Juan del Rosal 12, 28040 Madrid, Spain;Laboratorio Nacional de Fusión, CIEMAT, Avda Complutense 40, 28040 Madrid, Spain)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Andrey Alekseev (Diagnostics, ITER Russia, Pl. Akademika Kurchatova, 1, Moscow, Russian Federation)

Co-author in P3.054 ITER Diagnostic Shutters

G. Andrey Alekseev (NRC Kurchatov Institute & Fusion Center, Moscow, Russian Federation)

Andrey Alekseev (NRC "Kurchatov Institute", Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER

Andrey Alekseev (NRC “Kurchatov institute”, Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

Agustin Aleman (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Luis Alfaro (Escuela de Ingenieria Electrica, Pontificia Universidad Catolica de Valparaiso, Valparaiso, Chile)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Hans-Josef Allelein (Institute of Energy and Climate Research – Nuclear Waste Management and Reactor Safety (IEK-6), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany;Institute for Reactor Safety and Reactor Technology (LRST), RWTH Aachen University, 52072 Aachen, Germany)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

M. Allinson (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Javier Alonso (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Javier Alonso (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Javier Alonso (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

David Alonso (ESTEYCO, Calle Menéndez Pidal, 17, 28036 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Jesus Alonso (Design, Manufacturing and Assembly, IK4-TEKNIKER, Eibar, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

David Alonso (Esteyco Mechanics, Esteyco, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

David Alonso (ESTEYCO, C. Menéndez Pidal 17, 28036 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Piergiorgio Alotto (DII, Università di Padova, Via Gradenigo, 6/A, Italy)

Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Luis Alvarez (ASTURFEITO, S.A, Avda. de la Siderurgia 17, 33417 Avilés – Asturias, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Luis Alvarez (Asturfeito, Avenida de la Siderurgia, 33417 Avilés, Asturias , Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Elena Alvaro (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Eduardo Alves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies

Roberto Ambrosino (Engineering department, University of Naples Parthenope, Napoli, Italy;CREATE-ENEA, via Claudio 21, I-80125, Napoli, Italy)

Co-author in P2.005 The DTT device: alternative configurations

Roberto Ambrosino (Ass. CREATE-ENEA, Universita’ di Napoli “Parthenope”, Naples, Italy)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Giuseppe Ambrosino (Dept. Of Electric Engineering and Information Tehcnology, Univ. Di Napoli “Federico II”, Napoli, Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Roberto Ambrosino (Consorzio CREATE Univ. Napoli Parthenope, Naples, Italy)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Giuseppe Ambrosino (CREATE, Università di Napoli Federico II, Napoli, Italy)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Victor Amoskov (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Victor Amoskov (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

YoungHwa An (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Young Hwa An (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

George Ana (National Institute for Cryogenics and Isotopes Technologies - ICSI, Rm. Valcea, Romania)

Rohit Anand (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Sergey Ananyev (Complex physical and chemical technologies, National Research Center "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P1.150 D-T fuel system of DEMO-FNS tokamak with tritium breeding blanket

Igor Anashkin (NRC"Kurchatov Institute", Moscow,Kurchatov Sq.,1, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Alexey Ancharov (Institute of Solid State Chemistry and Mechanochemistry, 18 Kutateladze street, Novosibirsk, 630128, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Gabor Anda (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

J. Anderson (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Erik Andersson Sunden (Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P1.064 Calculation of the profile dependent neutron backscatter matrix for the JET neutron camera system

Erik Andersson-Sunden (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Masami Ando (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Masami Ando (Japan Atomic Energy Agency, Rokkasho, Aomori 039-3212, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Masami Ando (JAEA, Rokkasho, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H

Yanis Andrebe (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Evgeny Andreenko (NRC "Kurchatov Institute", Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER

Evgeny Andreenko (NRC “Kurchatov institute”, Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

Tamara Andreeva (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Philip Andrew (ITER organisation, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Pivkov Andrew (Mechanics and Control, Peter the Great St.Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Philip Andrew (ITER Organization, Cadarache, France)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Mindaugas Andrulevicius (Institute of Materials Science, Kaunas University of Technology, Barsausko street 59, LT-50131, Kaunas, Lithuania;Department of Physics, Kaunas University of Technology, Studentu street 50, LT-51368, Kaunas, Lithuania)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Alessandro Anemona (ICAS, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Maurizio Angelone (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome) Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Carmela Annino (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Andris Anspoks (Institute of Solid State Physics, University of Latvia, Riga, Latvia)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

David Anthoine (Port Plugs & Diagnostics Integration Division, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, , France)

Co-author in P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics

Alexander Antipenkov (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Stefan Antohe (Faculty of Physics, University of Bucharest, Atomistilor Str. 405, 077125, Magurele, Romania;Academy of Romanian Scientists, Splaiul Independentei 54, 050094, Bucharest, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

De Lorenzi Antonio (Consorzio RFX, Corso Stati Uniti 4, Italy)

Co-author in P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests

Masiello Antonio (Fusion for Energy F4E, Barcelona, Spain)

Co-author in P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests

Akira Aoki (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Maria Laura Apicella (Unità Tecnica Fusione, C.R. ENEA Frascati, Via E. Fermi 45, Frascati, Roma, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Lynton Appel (EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, United Kingdom)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

Antonio Appi (ENEA, Centro Ricerche Frascati, Italy, Frascati, Italy)

Co-author in P2.010 The DTT device: general layout

Daniele Aprile (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors

Daniele Aprile (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

D. Aquaro (Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 2-56126, Pisa, (PI), Italy)

Co-author in P1.140 Three-dimensional condensation regime of steam injected into water at sub-atmospheric conditions

Matyas Aradi (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Aleksey Arakcheev (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation;Novosibirsk State Technical University, 20 Karla Marksa prospect, Novosibirsk, 630092, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Kuniaki Araki (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Kuniaki Araki (Nuclear Fusion Dynamics, RIAM, Kyushu University, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Frederik Arbeiter (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Frederik Arbeiter (Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES

Frederik Arbeiter (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Frederik Arbeiter (INR-MET, KIT, Karlsruhe, Germany)

Co-author in P3.145 Review of Hydrogen Isotopes Transport Parameter

Frederik Arbeiter (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.172 The test cell configuration under IFMIF-DONES condition

Frederik Arbeiter (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.116 Thermal performance augmentation by detached rib-arrays for helium-gas cooled First Wall applications

Nils Arden (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Nils Arden (E1 - tokamak scenario development, Max Planck institute for plasma physics, Garching, Germany)

Co-author in P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade

Pietro Arena (Dipartimento di energia, Ingegneria dell'Informazione e modelli matematici, University of Palermo, Viale delle Scienze, Palermo, Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Pietro Arena (DEIM, University of Palermo, Viale delle scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Pietro Arena (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128 Palermo, Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Pietro Arena (Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy, Italy)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Pietro Arena (Dipartimento di Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, I-90128 Palermo, Italy)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Pietro Arena (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Pietro Arena (Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Palermo, Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Igor Arkhipov (A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences,, Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Alexey Arkhipov (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

David Armstrong (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

Fernando Arranz (Laboratorio Nacional de Fusion, CIEMAT, MADRID, Spain)

Co-author in P3.003 Accelerometers for boiling onset detection on beam stopper of LIPAc accelerator

Shakeib Arshad (Fusion for Energy, 08019 Barcelona, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Shakeib Arshad (Diagnostics, Fusion for Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P3.054 ITER Diagnostic Shutters

Daria Arslanova (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

Jean-Francois Artaud (CEA-IRFM, 13108 Saint-Paul-lez-Durance, France, France)

Co-author in P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas

Jean-Francois Artaud (CEA, IRFM, 13108 Saint-Paul-lez-Durance, France)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Karsten Arts (Eindhoven University of Technology, Eindhoven, Netherlands)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

A. Arun Prakash (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Gleb Asadulin (NRC "Kurchatov Institute", Moscow, Russian Federation;NRNU “MEPhI”, Moscow, Russian Federation)

Co-author in P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER

Nobuyuki Asakura (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Nobuyuki Asakura (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Nobuyuki Asakura (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Nobuyuki Asakura (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Nobuyuki Asakura (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Nobuyuki Asakura (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Enrique Ascasibar (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.175 Radiation induced deuterium absorption dependence on temperature, dose rate, and gas pressure for SiC

Enrique Ascasibar (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Team ASDEX Upgrade (Experimentelle Plasmaphysik 1, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Team ASDEX Upgrade (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.037 Helium neutral beam injection into ASDEX Upgrade

Team Asdex Upgrade (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

the ASDEX Upgrade Team (Max-Planck-Institut fuer Plasmaphysik, 85748 Garching, Germany)

Co-author in P4.083 Standardization of the hard- and software used to operate manipulators at ASDEX Upgrade

the ASDEX Upgrade Team (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

ASDEX Upgrade team (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

and the ASDEX Upgrade Team (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Jose Asenjo (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Andrew Ash (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Naoko Ashikawa (National Institute for Fusion Science, 322-6, Oroshi-cho, Tokishi, Gifu, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Kumudni Asudani (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ors Asztalos (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

O. Asztalos (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Neway Atnafu (Engineering, Princeton University Plasma Physics Lab, Princeton, United States)

Co-author in P3.089 NSTX-U coils bus bars design and construction

P.K. Atrey (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Julien Aubert (Department of Systems and Structures Modelling, CEA, Gif-sur-Yvette, France)

Co-author in P1.171 Nuclear analysis of the HCLL blanket for the European DEMO

Julien Aubert (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Julien Aubert (DEN, DM2S , CEA Saclay, Gif-sur-Yvette, France)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Marie Helene Aumeunier (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Marie-Helene Aumeunier (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Kumar Aveg (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ignacio Aviles Santillana (CERN, Geneva, Switzerland)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

Liga Avotina (Institute of Chemical Physics, University of Latvia, Jelgavas Str.1, LV 1004, Riga, Latvia;National Institute for Laser, Plasma and Radiation Physics, Atomistilor Str. 409, 077125, Magurele, Romania;Faculty of Physics, University of Bucharest, Atomistilor Str. 405, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Konstantinos Avramidis (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Kostas Avramidis (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Kostas Avramidis (IHM, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Konstantinos Avramidis (Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Cedric Awanzino (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Juan Ayllon (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Keisuke Azuma (Graduate School of Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Keisuke Azuma (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Nikita Babinov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Gattu R. Babu (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Christian Bachmann (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Christian Bachmann (Power Plant Physics and Technology, EUROfusion PMU, Garching, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

C. Bachmann (EUROfusion - Programme Management Unit, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

C. Bachmann (Eurofusion-PPPT, Eurofusion, Garching, Germany)

Co-author in P3.128 Progress in EU-DEMO In-Vessel Components integration

Christian Bachmann (Eurofusion Pmu, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Christian Bachmann (PPPT, EUROfusion, Boltzmann Str. 2, 85748, Garching, Germany)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Christian Bachmann (Power Plant Physics And Technology, EFDA, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Christian Bachmann (Power Plant Physics & Technology Department, PMI, EUROfusion Consortium, Garching, Boltzmannstr. 2, Germany)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Michael Bader (Ampegon AG, Spinnereistrasse 5, CH-5300 Turgi, Switzerland)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Amro Bader (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Michael Bader (Ampegon AG, Turgi, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Amro Bader (Tokamak Scenario Development Department, Max Planck Institute for Plasma Physics, D-85748, Garching Bei Munchen, Germany)

Co-author in P4.025 Integrating a distributed antenna in DEMO: requirements and challenges

Jan Badziak (Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.206 Laser-driven accelerator of intense plasma beams for materials research

Jinho Bae (Tokamak Technology, National Fusion Research Institute(NFRI), Daejeon, South Korea)

Co-author in P1.002 Design and Structural Analysis of the Upending Tool

Jinho Bae (Tokamak Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

Edu Baeza (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Paul Bagot (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

Nadezda Bagrets (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Nitin Bairagi (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Jun-Gyo Bak (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.046 Improvements of magnetic measurements for plasma control in KSTAR tokamak

Anastasia Bakaeva (SCK-CEN, Mol, Belgium)

Co-author in P3.105 Microstructural and micro-mechanical changes in tungsten under high flux plasma exposure

Tomas Bakalar (TechSoft Engineering spol. s r.o., Na Pankráci 322/26, 140 00 Praha 4 - Nusle, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Snejana Bakardjieva (Institute of Inorganic Chemistry AS CR, 250 68 Rez, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Viktor Baklanov (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Victor Baklanov (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

K. Balasubramaniam (Non Ferrous Materials Technology Development Centre, Kachanbagh, Hyderabad, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Itziar Balboa (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Itziar Balboa (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Martin Balden (Plasmarand und Wand, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Stephane Balme (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Colette Balorin (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Colette Balorin (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

N. Balshaw (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Nick Balshaw (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Carlo Baltador (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Moni Banaudha (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Martin Banduch (Design Engineering, Max-Planck-Institut für Plasmaphysik, Wendelsteinstr. 1, 17491 Greifswald, Germany)

Co-author in P1.012 A software eco-system for the integrated design of W7-X

Mainak Bandyopadhyay (Diagnostic Neutral Beam (DNB), ITER-India (Institute for Plasma Research), Gandhinagar, India)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Mainak Bandyopadhyay (ITER-India, Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Steffano Banetta (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019, Barcelona, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Stefano Banetta (Fusion For Energy (F4E), Barcelona, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Stefano Banetta (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Stefano Banetta (Fusion for Energy, Torres Diagonal Litoral, B3, Carrer Josep Pla, 2 – 08019 Barcelona, Spain)

Co-author in P2.102 Beryllium bonding pre-qualification for the ITER First Wall procurement in EU Domestic Agency

Eunnam Bang (KSTAR research center, NFRI, Daejeon, South Korea)

Co-author in P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR

J. Banks (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Joe Banks (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Laxmikant K. Bansal (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul-lez-Durance, France)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Gourab Bansal (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Hui Bao (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P2.155 Experimental study on the subcooled boiling in square channel

Pan Baoguo (Institute of Applied physics, Army Officer Academy of PLA, Hefei city, Anhui Province, P.R.China 230031, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

P. Barabaschi (Fusion for Energy, BFD Department, Garching, Germany)

Co-author in I3.2 The IFMIF-DONES Fusion Neutron Source

P. Barabaschi (JT-60SA EU-Home Team, Fusion for Energy, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Lucio Barbato (DIETI, Consorzio CREATE, Univ. Napoli Federico II, 80125 Napoli, Italy)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Jose Luis Barbero Soto (ARKADIA, L'Opale, 65 Rue Louis de Broglie, 13090 Aix en Provence, France)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Laura Barillas (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Robin Barnsley (ITER Organization, St. Paul-lez-Durance, France)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Robin Barnsley (ITER Organization, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Gianluca Barone (Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy)

Co-author in P4.190 Experimental loop and purification system design for corrosion in flowing PbLi

Gianluca Barone (Dipartimento di Ingegneria Civile e Industriale , University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy)

Co-author in P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis

Teteny Baross (WIGNER RCP, RMKI, PO Box 91, H-1521 Budapest, Hungary)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Teteny Baross (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Teteny Baross (WIGNER RCP, RMKI, Konkoly-Thege Miklós u. 29-33, Budapest, H-1121,, Hungary)

Co-author in P2.186 Diffusion welding methods at Plasma Facing Components in fusion reactor environment

Marc Barrachin (IRSN, Saint Paul Lez Durance, France)

Co-author in O4C.4 Beryllium dust behaviour during ITER LOCA accident

Eduardo Barrera (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Tom R Barrett (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Tom Barrett (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.159 Coupled neutronic and engineering analysis of the Helium Cooled Pebbled Bed with Be12Ti

Thomas R. Barrett (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Thomas R. Barrett (CCFE, Culham Science Centre, Oxfordshire OX 14 3DB, United Kingdom)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Denisa Bartkova (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Justin E. Barton (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, PA, United States)

Ujjwal Kumar Baruah (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

U.K. Baruah (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Ujjwal Baruah (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

Isidro Bas (GTD Sistemas de Informacion, 08005 Barcelona, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Michele Bassan (ITER organisation, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Serena Bassini (ENEA FSN-ING-QMN, ENEA, C.R. Brasimone, 40032 Camugnano - BO, Italy)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Debjyoti Basu (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Tristan Batal (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Lluis Batet (Department of Physics, UPC-BarcelonaTech, Barcelona, Spain)

Co-author in P2.164 Liquid metal heat and mass transfer coefficients in vertical ducts with flow channel inserts

Antonio Batista (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Antonio J.N. Batista (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Antonio Batista (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Antonio Batista (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Jorge Batista da Cruz (A. Silva Matos, Apartado 8, 3740-809, Sever do Vouga, Portugal)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

P. Batistoni (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, ENEA, Department of Fusion and Nuclear Safety Technology, I-00044 Frascati (Rome), Italy)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

P. Batistoni (Department of Fusion and Technology for Nuclear Safety and Security , ENEA, via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Paola Batistoni (Department of Fusion and Nuclear Safety Technology, ENEA, 00044 Frascati (Rome), Italy)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

Paola Batistoni (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Paola Batistoni (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome) Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Holger Bau (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

H. Bau (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Olivier Baulaigue (IRFM, CEA, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Larisa Baumane (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia;Latvian Institute of Organic Synthesis, Aizkraukles 21, LV-1006, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Bertrand Bauvir (CODAC, ITER Organization, Route de Vinon sur Verdon 13115 Saint Paul Lez Durance, France)

Co-author in P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory

Christoph M. Bayer (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Christophe Baylard (Configuration Control Division, ITER Organization, Route de Vinon sur Verdon, 13115 Saint-Paul-Lez-Durance, France)

Co-author in P1.012 A software eco-system for the integrated design of W7-X

Larry Baylor (ORNL, Oak Ridge (TN), United States)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Larry Baylor (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.015 Developments in pellet injection technology for transient mitigation applications

Alexander Bazarov (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Alexander Bazarov (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Alexander Bazhenov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Bertrand Beaumont (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul Lez Durance, France)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

Christian Beck (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

Mitja Beckers (Institute for Energy and Climate Research IEK-4 (Plasma Physics), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor

C. D. Beidler (Max Planck Institute for Plasma Physics, Wendelsteinstraße 1, 17489 Greifswald, Germany)

Co-author in I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator

Jiang Beiyan (Hefei Juneng Electro Physics High-tech Development Co., Ltd, Hefei, Anhui, China)

Co-author in P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D

Jiang Beiyan (Hefei Juneng Electro Physics High-tech Development Co., Ltd, 350 Shushanhu Road, Hefei,Anhui 230031, China)

Co-author in P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box

Nicolas Bekris (ITEP-TLK, Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P1.108 Influence of divertor material modifications on the inventory of tritium in the divertor region

N. Bekris (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, EUROfusion PMU, Culham Science Centre, Abingdon, OX14 3DB, United States)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Misha Beldishevski (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Thomas Belenguer (INTA, Ctra de Ajalvir km 4, 28850 Torrejón de Ardoz, Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Mohamed Belhaj (Spatial Environment Department, ONERA, the French Aerospace Laboratory, 2 avenue Edouard Belin, 31000 Toulouse, France)

Co-author in P1.027 Electron Emission Under Uniform Magnetic Field of Materials For Fusion And Spatial Applications

Boris Bellin (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Boris Bellin (Fusion for Energy, Torres Diagonal Litoral, B3, Carrer Josep Pla, 2 – 08019 Barcelona, Spain)

Co-author in P2.102 Beryllium bonding pre-qualification for the ITER First Wall procurement in EU Domestic Agency

Jorge Belo (Instituto de Plasmas e Fusão Nuclear, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.052 Performance assessment of critical waveguide bends for the ITER in-vessel plasma position reflectometry systems

Eva Belonohy (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Max-Planck-Institut für Plasmaphysik, Boltzmannstrasse 2, Garching bei München, D-85748, Germany)

Co-author in P2.003 Technical rehearsal of DT operation at JET

E. Belonohy (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Max-Planck-Institut für Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Eva Belonohy (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Max-Planck-Institut für Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Alexander Belov (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Sunil Belsare (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Sunil Belsare (Divertor & First Wall Technology Development Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.108 Design and development of high pressure high temperature water circulation system for HHFTF

Valery Belyakov (JSC "NIIEFA", St-Petrsburg, Metallostroy, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Valery Belyakov (JSC «NIIEFA», St.Petersburg, Russian Federation)

Valery Belyakov (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Attila Bencze (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Attila Bencze (Department of Plasma Physics, Institute for Particle and Nuclear Physics, Wigner RCP of the H.A.S., Konkoly Thege Miklos road 29-33, H-1121 Budapest, Hungary)

Co-author in P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak

Ivan Benelian (F4E, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Ahmed Bentaib (PSN-RES/SAG/B2EGR, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), 92262 Fontenay-aux-Roses, France)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

Evgeny Berik (ESTLA Ltd., Tartu, 51014, 185 Riia, Estonia)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Jean-Michel Bernard (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Davide Bernardi (FSN-ING-PAN, ENEA Brasimone, Camugnano (BO), Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Davide Bernardi (C.R. Brasimone, ENEA, 40032 Camugnano (BO), Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Philippe Bernascolle (ITER Organization, St. Paul-lez-Durance, France)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Heinemann Bernd (Max Planck InstitutfürPlasmaphysik , Boltzmannstraße 2 D-85748 Garching, Germany)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Miklos Berta (Szechenyi Istvan University, H-9026 Gyor, Egyetem ter 1., Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Miklos Berta (Department of Physics and Chemistry, Szechenyi Istvan University, Gyor, Egyetem ter 1., Hungary)

Co-author in P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak

Luciano Bertalot (Port Plugs & Diagnostics Integration Division, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, , France)

Co-author in P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics

Luciano Bertalot (ITER Organization, St. Paul-lez-Durance, France)

Luciano Bertalot (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Luciano Bertalot (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Andrea Bertinetti (Politecnico di Torino, Torino, Italy)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Robert Bertizzolo (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Robert Bertizzolo (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Denis Bessette (Magnet Division, ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex, France)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Konstantin Bestuzhev (Joint Stock Company "D.V. Efremov Institute of Electrophysical Apparatus", Doroga na Metallostroy, 3, 196641 St. Petersburg, Russia, Russian Federation)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Paolo Bettini (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P1.075 Upgraded electromagnetic measure system for RFX-mod
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Paolo Bettini (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy;DII, Università di Padova, Via Gradenigo 6/A, 35131, Padova, Italy)

Co-author in P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade

Paolo Bettini (Consorzio RFX, Padua, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod
Co-author in P4.045 Comparison of three methods for the solution of eddy current problems in fusion devices

Paolo Bettini (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Manisha K. Bhandarkar (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Manisha Bhandarkar (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Punjapyu Bharathi (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Shailesh Bhatt (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

K. S. Bhatt (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Gajjar Bhoomi S (In Wall Shielding, ITER-India, Gandhinagar, India)

Co-author in P1.186 Study of Magnetic Properties of IWS Materials during Material and Component Manufacturing

Aldo Bianchi (INFN, Genova, Italy)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Christoph Biedermann (E4, Max-Planck-Institut Plasmaphysik, Greifswald, Germany)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Christoph Biedermann (Max-Planck-Institüt für Plasmaphysik, Greifswald, Germany)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Christoph Biedermann (Max-Planck-Institut für Plasmaphysik, , Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

B. Bieg (Institute of Physics, Maritime University of Szczecin, Waly Chrobrego 1-2, 70-500 Szczecin, Poland)

Co-author in P3.074 Influence of the geometry system on the effectiveness of polarimetric measurements in the thermonuclear plasma diagnostics

Wolfgang Biel (FZ Juelich, Juelich, Germany)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Wolfgang Biel (Institute of Energy- and Climate Research, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Wolfgang Biel (Institute for Energy and Climate Research IEK-4 (Plasma Physics), Forschungszentrum Juelich GmbH, Juelich, Germany;Department of Applied Physics, Ghent University, Ghent, Belgium)

Co-author in P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor

Jakub Bielecki (Department of Radiation Transport Physics, Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN), Krakow, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

Ted Biewer (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Marco Bigi (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Marco Bigi (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Bernard Bigot (ITER Organization, Route de Vinon-sur-Verdon, CS90 046, 13067 St Paul-lez-Durance Cedex, France)

Co-author in I1.1 The ITER Project: Fusion Technology comes of age

Gerard Billotte (General Electric, 90018 Belfort, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Wu Bin (Institute of Nuclear Energy Safety Technology, Hefei, China)

Co-author in P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model

Zhang Bin (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Federico Binda (Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P1.064 Calculation of the profile dependent neutron backscatter matrix for the JET neutron camera system

M. Binderbauer (Tri Alpha Energy, Inc, Rancho Santa Margarita, CA 92688, United States)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Dietrich Birus (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.093 Commissioning of the Wendelstein 7-X Quench-Detection-System

Prabal Biswas (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Oliver Bitz (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Tom Bjorholm (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Trevor Blackman (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Trevor Blackman (CCFE, Culham Science Centre, Abingdon, OX13 3DB, United Kingdom)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Vaclav Blaha (Department of Energy Engineering, Czech Technical University In Prague, Zikova 4, 166 36 Prague 6, Czech Republic)

Co-author in P2.200 Effective water cooling of very hot surfaces during the LOCA accident

David Blanchet (DEN-DER, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Peter Blatchford (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Peter Blatchford (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Torsten Bluhm (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Torsten Bluhm (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Torsten Bluhm (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany;Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Li Bo (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Road, Hefei,Anhui, China)

Co-author in P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D

Li Bo (Institute of Plasma Physics Chinese Academy of Sciences , 350 Shushanhu Road, Hefei,Anhui 230031, China)

Co-author in P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box

Volodymyr Bobkov (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P3.033 ICRF system efficency

V. V. Bobkov (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Lorenzo Boccaccini (KIT, INR, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Lorenzo Virgilio Boccaccini (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Lorenzo Virgilio Boccaccini (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.118 Characterization of the cooling channels of First Wall Mock-up dedicated to the HCPB-TBM qualification

L.V. Boccaccini (Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.128 Progress in EU-DEMO In-Vessel Components integration

Lorenzo Virgilio Boccaccini (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.130 Identification of Blanket design points using an integrated multi-physics approach

Ondrej Bogar (Faculty of Mathematics, Physics and Informatics, Comenius University in Bratislava, Bratislava, Slovakia)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak
Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

D. Boilson (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Ageeth A. Bol (Eindhoven University of Technology, Eindhoven, Netherlands)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Marco Boldrin (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Marco Boldrin (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete S.p.A.), Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Grzegorz Boltruczyk (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Grzegorz Boltruczyk (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Tommaso Bolzonella (Consorzio RFX, Padova, Italy)

Tommaso Bolzonella (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Tomaso Bolzonella (Consorzio RFX, I-35127 Padova, Italy)

Co-author in P2.007 The DTT device: systems for heating

Tommaso Bolzonella (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas

Francesca Bombarda (ENEA C.R. Frascati, via Enrico Fermi, 45 Frascati (Rome), Italy)

Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

Francesca Bombarda (INFN, Rome, Italy)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation

Francesca Bombarda (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Francesca Bombarda (FSN Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P1.091 The tilted toroidal field coil concept for advanced tokamaks

Francesca Bombarda (INFN Associate, Roma, Italy)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Luca Boncagni (FSN, ENEA C.R. Frascati, Via E. Fermi 45, Frascati-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Anca Bonciu (National Institute for Laser, Plasma and Radiation Physics, 409 Atomistilor Street, Magurele, Romania;Faculty of Physics, University of Bucharest, 405 Atomistilor Street, Magurele, Romania)

Co-author in P3.108 Production of tungsten particles from a radiofrequency plasma jet

Eduard Bondarchuk (JSC "NIIEFA", St-Petrsburg, Metallostroy, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Gaetano Bongiovi (Dipartimento di energia, Ingegneria dell'Informazione e modelli matematici, University of Palermo, Viale delle Scienze, Palermo, Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Gaetano Bongiovi (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128 Palermo, Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Gaetano Bongiovi (Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Palermo, Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Gaetano Bongiovi (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Tullio Bonicelli (European Joint Undertaking for ITER and the Development of Fusion Energy (F4E), Barcelona, E-08019, Spain)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

T. Bonicelli (Fusion For Energy, C/ Josep Pla 2, 08019 Barcelona, Spain)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Tullio Bonicelli (Fusion For Energy, c/o Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Roberto Bonifetto (Energy Department, Politecnico di Torino, Torino, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO
Co-author in P3.080 Performance analysis of ITER CSI coil and conductor 1A of the ITER CSMC

Roberto Bonifetto (Dipartimento Energia, Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Torino , Italy)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Yannick Bonnet (Port Plug & Diagnostics, ITER, Vinon-sur-Verdon, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Yannick Bonnet (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

D. Bora (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Dhiraj Bora (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Alexey Borovkov (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Vadim Borsuk (Institut für Plasmaphysik, Max-Planck-Gesellschaft MPG, 17491 Greifswald, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Vadim Borsuk (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Jean Boscary (Max-Planck-Institut für Plasmaphysik, Garching b. München, Germany)

Co-author in P2.124 Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X

Jean Boscary (Max-Planck_Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Jean Boscary (Max-Planck-Institut für Plasmaphysik, Garching bei Muenchen, Germany)

Co-author in P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event

Hans-Stephan Bosch (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

H.-S. Bosch (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Hans-Stephan Bosch (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Hans-Stephan Bosch (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Bernd Boswirth (Max-Planck-Institut für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Jose Botija (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Jose Botija (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Remi Boullon (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Remi Boullon (DEN, DM2S , CEA Saclay, Gif-sur-Yvette, France)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Benoit Bourdel (Ecole Polytechnique, Route de Saclay, 91120, Palaiseau, France)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

C. Bourdelle (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation

Alex Bourquard (General Electric, 90018 Belfort, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Jacques Boury (Thales Electron Devices, Velizy Villacoublay, France)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Bastien Boussier (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Bastien Boussier (Plant Engineering Department, Vacuum Section, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067- St. Paul Lez Durance Cedex, France)

Co-author in P4.162 Dynamic model of ITER cryo-pumps cryogenic distribution system: torus pumping and regeneration scenarios

Helen Boyer (Culham Centre for Fusion Energy, Abingdon, Oxfordshire, United Kingdom)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Sergey Bozhenkov (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Craig Bradley (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Torsten Braeuer (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Eduard Bragulat (Fusion For Energy, Barcelona, Spain)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

V. Braic (Institute of Atomic Physics, Magurele, Ilfov, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Viorel Braic (Institute of Atomic Physics, Magurele, Ilfov, Romania)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

V. Braic (Institute of Atomic Physics, Bucharest, Romania)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Beatriz Branas (Laboratorio Nacional de Fusion, CIEMAT, MADRID, Spain)

Co-author in P3.003 Accelerometers for boiling onset detection on beam stopper of LIPAc accelerator

Beatriz Branas (National Fusion Lab., CIEMAT, Av. Complutense, Madrid, Spain)

Co-author in P4.185 IFMIF bean dump front shielding residual dose study with SEACAB metholodogy

Christian Brandt (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Falk Braunmueller (Swiss Plasma Center (SPC), EPFL, Lausanne, Switzerland)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Falk Braunmueller (SPC, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Mauro Breda (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment
Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Sylvain Bremond (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Sylvain Bremond (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Sylvain Bremond (Association CEA pour la Fusion Contrôlée, CEA Cadarache - 13108 St Paul les Durance, France)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Marco Breschi (Department of Electrical, Electronic and Information Engineering , University of Bologna, Viale Risorgimento 2, 40136, Bologna, Italy)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Uwe Breuer (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

S. Brezinsek (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung – Plasmaphysik, 52425 Jülich, Germany)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Sebastijan Brezinsek (Institut für Energie und Klimaforschung/Plasmaphysik (IEK-4), Forschungszentrum Jülich (TEC Partner), D-52435 Jülich, Germany)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Sebastijan Brezinsek (IEK - Plasmaphysik, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Pierfederico Briani (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Benoit Brichard (Fusion for Energy, Barcelona, Spain)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Michel Briend (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

A. Briesemeister (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Alberto Brighenti (Energy Department, Politecnico di Torino, Torino, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO

Jens Brinkmann (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Matias Brix (Culham Science Centre, Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Claudio Brocca (NIDEC-ASI, Milan, Italy)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Christoph Broeckmann (Lehrstuhl für Werkstoffanwendungen im Maschinenbau, RWTH Aachen, 52062 Aachen, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Giorgio Brolatti (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Matteo Brombin (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Matteo Brombin (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors

Arthur Brooks (Engineering Analysis, Princeton Plasma Physics Lab, Princeton, United States)

Co-author in P3.152 Modeling blanket ferromagnetic loading using edge potential elements

J.N. Brooks (Purdue University, West Lafayette, IN, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Andrzej Broslawski (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Andrzej Broslawski (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Torsten Broszat (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Thomas Brown (Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, NJ 08543, United States)

Co-author in P2.167 Numerical Model of Dual-Coolant Lead–Lithium (DCLL) Blanket

Richard Brown (PMU, EFDA EUROFusion, Garching, Germany)

Co-author in P3.198 The Development of an assessment framework to evaluate DEMO plant concept options

Emeric Brun (Den-Service d’études des réacteurs et de mathématiques appliquées (SERMA), CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in O5A.3 Recent developments in the TRIPOLI-4® Monte-Carlo code for fusion applications

Giacomo Bruni (Dept. of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome, Italy)

Co-author in P4.149 Processing of Plasma Enhancement Gases through ceramic membranes

Christopher Brunkhorst (Plasma Physics Laboratory, Princeton University, Princeton, New Jersey, United States)

Co-author in P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand

Vincent Bruno (IRFM, CEA, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Vincent Bruno (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Alex Bruschi (Institute of Plasma Physics “P.Caldirola", National Research Council of Italy, Milan, Italy)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Alessandro Bruschi (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Alessandro Bruschi (Istituto di Fisica del Plasma, Consiglio Nazionale delle Ricerche, Via R.Cozzi 53, 20125 Milano, Italy)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Pierluigi Bruzzone (EPFL-SPC, Villigen, Switzerland)

Co-author in P1.085 DEMO-EUROFusion Tokamak, design of TF coil inter-layer splice joint

Pierluigi Bruzzone (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Pierluigi Bruzzone (Swiss Plasma Center, EPFL, 5232 Villigen-PSI, Switzerland)

Co-author in O1C.4 Effect of cycling load on performance of strands made by twisted-stacks of HTS tapes

Pierluigi Bruzzone (Fusion Technology - Superconductivity , Swiss Plasma Center, CH 5232 - Villigen PSI, Switzerland)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Pierluigi Bruzzone (Swiss Plasma Center, EPFL, Villigen PSI, Switzerland)

Co-author in P1.086 Cost Estimate for the Toroidal Field Coil System of DEMO
Co-author in P1.087 Thermal-Hydraulic and Quench Analysis of the DEMO Toroidal Field Winding Pack WP1

Jerome Bucalossi (IRFM, CEA Cadarache, F-13108 Saint Paul Lez Durance, France)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

J. Bucalossi (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation
Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Jerome Bucalossi (CEA IRFM, Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Jerome Bucalossi (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Jerome Bucalossi (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Jerome Bucalossi (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Jerome Bucalossi (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Viacheslav Budaev (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Fabrizio Buffa (Rivoira Gas srl, Chivasso (TO), Italy)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Leo Buhler (Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.168 Influence of modifications of HCLL blanket design on MHD pressure losses
Co-author in P2.151 MHD flow and heat transfer in model geometries for WCLL blankets

Ivan Bukreev (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

David Bult (Heemskerk Innovative Technology, Merelhof 2, 2172 HZ, Sassenheim, Netherlands)

Co-author in P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment

Patrick Bunting (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Gaetano Buongiovi (DEIM, University of Palermo, Viale delle scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Aleksandr Burdakov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation;Novosibirsk State Technical University, 20 Karla Marksa prospect, Novosibirsk, 630092, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Rainer Burhenn (Max-Planck-Institut für Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Filippo Burini (Power Electronics, OCEM Energy Technology, Via della Solidarietà 2/1 - 40056 Valsamoggia (BO), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Sylvain Burles (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Arturo Buscarino (DIEEI, Università degli Studi di Catania, Viale Andrea Doria, 6, Catania, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Michael Bush (Galvano-T GmbH, Raiffeisenstraße 8, 51570 Windeck, Germany)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Alexey Bushkov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Igor Buslakov (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Igor Buslakov (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Chiara Bustreo (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P4.204 Economic assessment of different operational reactor cycle structures in a pulsed DEMO-like power plant

B. Butler (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Barry Buttler (CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P4.148 The coolant purification system in DEMO: candidate technologies, requirements and interfaces

Peter Buxton (Tokamak Energy Ltd, Milton Park, United Kingdom)

Co-author in P1.047 Equilibrium modelling of merging compression startup in a spherical tokamak

Victor Bykov (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

I. Bykov (Center for Energy Research, University of California, San Diego, La Jolla, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Victor Bykov (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Victor Bykov (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Victor Bykov (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Nikolay Bykovsky (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Nikolay Bykovsky (Swiss Plasma Center, EPFL, 5232 Villigen-PSI, Switzerland)

Co-author in O1C.4 Effect of cycling load on performance of strands made by twisted-stacks of HTS tapes

Santiago Cabrera (National Fusion Laboratory, CIEMAT, MADRID, Spain)

Co-author in P2.092 Metrology of an additively manufactured coil frame for stellarators

Santiago Cabrera (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Santiago Cabrera (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Ilaria Cacciotti (Engineering, . University of Rome “Niccolò Cusano”, Via Don Carlo Gnocchi 3, 00166 Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Emanuele Cacciotti (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Lijun Cai (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Joan Caixas (ITER, FUSION FOR ENERGY, BARCELONA, Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Giuseppe Calabro (ENEA, via Enrico Fermi 45, I-00044, Frascati, Italy)

Co-author in P2.005 The DTT device: alternative configurations

Barbara Calcagno (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements
Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap
Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Barbara Calcagno (Tokamak Engineering Department, ITER, St Paul-lez-Durance, France)

Co-author in P4.126 Blanket manifold final design and validation

Barbara Calcagno (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Pattrick Calderoni (Fusion for Energy (F4E), Barcelona, Spain)

Co-author in P3.120 Development of force reconstruction method on EU ITER TBM based on strain measurements

Patrick Calderoni (TBM&MD Project, Fusion for Energy, Carrer J. Pla, 2, Builiding B3, Barcelona, Italy)

Co-author in P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy

Pattrick Calderoni (TBM&MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Builiding B3, 08019 Barcelona, Spain)

Co-author in P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM

Aida Calvo (Materials Department, CEIT-IK4, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain;Tecnun, University of Navarra, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Francisco Jose Calvo Plaza (IDOM, Avda. Monasterio de El Escorial 4, 28049 Madrid, Spain)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Patrick Camp (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

P. Camp (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Roberto Campagnolo (Fusion for Energy, 08019 Barcelona, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

D. Campling (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Daniel Canas (DEN, CEA , Gif-sur-Yvette, France)

Co-author in P2.017 Comparison of detritiation techniques for purely tritiated metallic waste

Luigi Candido (Department of Energy, Polytechnic University of Turin, Turin, Italy)

Co-author in P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy

Donatella Candura (Fusion Dept., Ansaldo Nucleare S.p.A., Genova, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Alessandra Canton (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

Bruno Cantone (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Chengzhi Cao (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds

Chenzhi Cao (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Adrian Capel (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Roberto Capobianco (Consorzio RFX, Padova, Italy)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Alvaro Cappa (Laboratorio Nacional de Fusión (LNF), Centro de Investigaciones Tecnológicas, Medioambientales y Tecnológicas (CIEMAT), Av. Complutense 40, 28040 Madrid, Spain)

Co-author in P3.075 Preliminary assessment of ex-vessel waveguides for the ITER Plasma Position Reflectometer

Antonino Cardella (Fusion for Energy, 85748 Garching bei Munchen, Germany)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

A. Cardella (Fusion For Energy, IPP/D1 Boltzmannstrasse 2 Garching 85748, Germany)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Antonino Cardella (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Sabas Cardenes (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Alessandro Cardinali (Dipartimento FSN, ENEA, via E.Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.007 The DTT device: systems for heating

Elisabetta Carella (LNF-DTF, CIEMAT, Madrid, Spain)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Elisabetta Carella (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Yann Carin (ITER, Fusion for Energy (F4E), Barcelona, Spain)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Maurizio Carlini (DAFNE, University of Tuscia, Via San Camillo De Lellis, 01100 Viterbo, Italy)

Co-author in P4.150 Heavy water decontamination tests through a Pd-membrane reactor

Dario Carloni (Institute of Neutron Physics and Reactor Technology (INR), , Karlsruhe Institute of Technology (KIT), Herrmann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Dario Carloni (KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.145 Design status of DEMO blanket primary heat transfer system

Andre Carls (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Andre Carls (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Andre Carls (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Labate Carmelenzo (CREATE, Department of Engineering, University of Naples “Parthenope”, Napoli, Italy)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Jose Miquel Carmona (AVS, Pol. Ind. Sigma Xixilion Kalea 2, Bajo Pabellón 10. 20870 Elgoibar., Spain)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Daniele Carnevale (Ing. Civile e Ing. Informatica, Università di Roma, Tor Vergata 0133 Roma, Italy, Università di Roma, Tor Vergata, Tor Vergata-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Antonio Carpeno (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Andrea Carpignano (NEMO group, Dipartimento Energia, Politecnico di Torino, 10129 Torino, Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Ricardo Carrasco (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Gabriel Carro (Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Saverio Carrozza (OCEM Energy Technology, Via della Solidarietà, 2-1/40056 Valsamoggia (BO), Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Gianfranco Caruso (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186, Roma, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Gianfranco Caruso (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II, 244, 00186, Roma, Italy)

Co-author in P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold

Gianfranco Caruso (Dipartimento di Ingegneria Astronautica, Elettrica ed Energetica, Università di Roma "La Sapienza", Roma, Italy)

Co-author in P2.150 CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module

P.F. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Bernardo Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Paulo F. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Bernardo Carvalho (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Paulo F. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Paulo Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Bernardo Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

I.S. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, P-1049-001, Lisboa, Portugal)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Pedro J. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Paulo Carvalho (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal)

Co-author in P4.135 Assessment of unmanned aerial vehicles for reactor inspection

Bernardo B. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Ivo S. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, P-1049-001 Lisboa, Portugal)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Paulo Carvalho (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Ivo Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, P-1049-001, Lisboa, Portugal)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Paulo Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

Bernardo B. Carvalho (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Natalia Casal (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Natalia Casal (TED, Diagnostic Division, ITER Organization, Caradache, France)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Natalia Casal (Port Plug & Diagnostics, ITER, Vinon-sur-Verdon, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Natalia Casal (TED, Diagnostic Division, ITER Organization, Cadarache, France)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

David Antonio Castano Bardawil (Institute of Energy and Climate Research , Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria

Jesus Castellanos (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Jesus Castellanos (CIEMAT, Madrid, Spain;UNED Fundación, Madrid, Spain)

Co-author in P3.008 Design, integration and manufacturing of the MEBT and DPlate support tables for IFMIF LIPAc

Juan Pablo Catalan (Departamento de Ingeniería Energética, Universidad de Educación a Distancia, Madrid, Spain)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Juan Pablo Catalan (Universidad Nacional de Educación a Distancia (UNED), C/ Juan del Rosal 12, Madrid, Spain)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

J. P. Catalan (Universidad Nacional de Educación a Distancia (UNED, C. Juan del Rosal, 12, 28040 Madrid, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Juan-Pablo Catalan (Energy Engineering Department, ETSII, UNED, Madrid, Spain)

Co-author in P2.142 Propagation of decay gamma source uncertainties to dose rate in SDR calculations with R2SUNED

Francesca Cau (ITER, FUSION FOR ENERGY, BARCELONA, Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Francesca Cau (Fusion for Energy, Barcelona, Spain)

John Caughman (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Jordan Cavalier (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Jordan Cavalier (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Roberto Cavazzana (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P1.075 Upgraded electromagnetic measure system for RFX-mod
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Roberto Cavazzana (Consorzio RFX (CNR, ENEA, INFN, Universita' di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 – Padova, Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

K. Cave-Ayland (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Marco Cecconello (Uppsala University, Uppsala, Sweden)

Co-author in P4.041 Neural network implementation for ITER neutron emissivity profile recognition

M. Cecconello (Department of Physics and Astronomy, Uppsala University, Box 516, Uppsala 75120, Sweden)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Silvio Ceccuzzi (Dipartimento FSN, ENEA, via E.Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.007 The DTT device: systems for heating

Silvio Ceccuzzi (FSN - Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide

Gabriele Cenedella (Delta-Ti Impianti S.p.A, Rivoli (TO), Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Mirela Cengher (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

Cristina Centioli (FSN (Nuclear Fusion and Fission and Related Technologies Department), ENEA, Via Enrico Fermi 45, Frascati, Italy)

Co-author in P4.088 Automatic pattern recognition on electrical signals applied to Neutron-Gamma discrimination

Cristina Centioli (ENEA CR Frascati, FRASCATI (ROME), Italy)

Co-author in P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak

Cristina Centioli (Dipartamento FSN, ENEA C. R. Frascati, E. Fermi 45, 00044 Frascati(Roma), Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

C. Centioli (ENEA C. R. Frascati, Dipartimento FSN, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Andrea Ceracchi (CECOM S.r.l., Via Tiburtina – Guidonia Montecelio - Roma, Italy)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Valerio Cerri (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Vannino Cervaro (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Zhiyong Chai (Taiyuan Iron & Steel (group) Co., Ltd. (TISCO), Taiyuan, 030003, China)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

A. Chakraborty (Institute for Plasma Research, Nr. Indira Bridge, Bhat Village, Gandhinagar, Gujarat 382428, India)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Arunkumar Chakraborty (Diagnostic Neutral Beam (DNB), ITER-India (Institute for Plasma Research), Gandhinagar, India)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Arun Chakraborty (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Arun Chakraborty (Diagnostic Neutral Beam, ITER India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Chodimella Chakrapani (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Clive Challis (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Han Soo Chang (Strategy Division, National Fusion Research Institute, Deajeon, South Korea)

Co-author in P4.205 The Economic Benefits of Big Science R&D Program: With a Focus on KSTAR Program

Yong-Bok Chang (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Yong-Bok Chang (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Yong Bok Chang (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Doo-Hee Chang (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Xiaobo Chang (Schoole of Nuclear Science and Technology, University of Science and Technology of China, Jinzhai Road 96, 230026, Hefei Anhui, China;Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Doo-Hee Chang (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Yoon-Suk Chang (Department of Nuclear Engineering, Kyung Hee University, 1732, Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do, South Korea)

Co-author in P2.134 Application of fracture mechanical assessment to in-wall shield ribs in ITER vacuum vessel

Philippe Chappuis (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Philippe Chappuis (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Philippe Chappuis (Tokamak Engineering Department, ITER, St Paul-lez-Durance, France)

Co-author in P4.126 Blanket manifold final design and validation

Bhumi Chaudhari (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Vishnu Chaudhari (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.069 The WEST Plasma Facing Components Protection
Co-author in P1.070 Measurements and controls implementation for the WEST project

Pradeep K. Chauhan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Nabiha Chaumeix (Institut de Combustion Aérothermique Réactivité et Environnement (ICARE), Centre National de la Recherche Scientifique (CNRS), 45071 Orléans, France)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

Didier Chauvin (CEA de Cadarache DSM/IRFM, 13108 Saint-Paul-lez-Durance, France)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Rene Chavan (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Rene Chavan (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Rene Chavan (EPFL-SPC, EURATOM – Confédération Suisse, CH-1015 Lausanne, Switzerland)

Co-author in P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment

Rene Chavan (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Rene Chavan (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Rene Chavan (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Chhaya Chavda (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Ioannis Chelis (National Technical University of Athens, Athens, Greece)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Ioannis Chelis (School of Electrical and Computer Engineering, NCSRD/National Technical University of Athens, Athens, Greece)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Chao Chen (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

Hongli Chen (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Chaobin Chen (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Zhibin Chen (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

Jiming Chen (Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.187 Study on the optimization of Cu/SS explosion bonding for ITER first wall components

Hongli Chen (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Y. Chen (ASIPP, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Yixue Chen (North China Electric Power University, Beijing, 102206, China)

Co-author in P2.157 Activation analysis of CFETR WCCB blanket

Changan Chen (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Chenyuan Chen (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Yue Chen (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Zhaoxi Chen (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Zhaoxi Chen (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Hongli Chen (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, China)

Co-author in P1.163 Safety analysis of the helium cooling system for the HCSB blanket of CFETR

Hongli Chen (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Youhua Chen (University of Science and Technology of China, Hefei, China;Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.145 Numerical simulation of purge gas flow in binary pebble beds based on DEM-CFD method

Gangyu Chen (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Tan Chen (Robotics Institute, Shanghai Jiao Tong University, Shanghai, China)

Co-author in P1.142 Design of a Standalone Joint Module toward Real EAST In-vessel Operation Use

Lei Chen (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.145 Numerical simulation of purge gas flow in binary pebble beds based on DEM-CFD method

Yuming Chen (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Shanqi Chen (Institute of Nuclear Energy Safety Technology, CAS·FDS Team, No.350, Shushanhu Road, Hefei, Anhui, China)

Co-author in P3.193 Probabilistic safety classification approach for SSCs of fusion reactors

Qian Chen (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

R. Chen (Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Yong Cheng (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Xiaoman Cheng (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui 230031, China)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Xiaoman Cheng (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)

Co-author in P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR

Mengyun Cheng (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Xiaoman Cheng (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shuhanhu Road, Hefei, Anhui, China)

Co-author in P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR

Yong Cheng (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Mun Seong Cheon (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

MunSeong Cheon (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Anton Chernakov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Alexander Chernakov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Maryna Chernyshova (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Maryna Chernyshova (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, 01-497 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Maryna Chernyshova (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Andrea Gaetano Chiariello (Department of Industrial and Information Engineering, Seconda Università degli studi di Napoli, IT-81031, Aversa, Italy)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Andrea Gaetano Chiariello (Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Takumi Chikada (Graduate School of Integrated Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Takumi Chikada (Graduate School of Integrated Science and Technology, Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings

Takumi Chikada (College of Science, Academic Institute, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Takumi Chikada (Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Takumi Chikada (Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles

Yevgen Chikhray (Institute of Experimental and Theoretical Physics of Kazakh National University, Almaty, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Evgeniy Chikhray (Research Institute of Experimental and Theoretical Physics KazNU, 71 al-Farabi Ave., 050040, Almaty, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Pierluigi Chiovaro (Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Palermo, Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Pierluigi Chiovaro (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Jacques Chiron (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France, France)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Jacques Chiron (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Giuseppe Chitarin (Management and Engineering, University of Padova, strad. S. Nicola, 3 - 36100 Vicenza, Italy;Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors

Giuseppe Chitarin (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy;Dept. of Engineering and Management, University of Padova, Strad. S. Nicola 3, 36100, Vicenza, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Mohamed Chmiaa (Institut Fresnel, Aix-Marseille Université, CNRS, Centrale Marseille, UMR 7249, F-13013, Marseille, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Moohyun Cho (POSTECH, Pohang, Gyeongbuk, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Seungyon Cho (TBM Technology Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process

Seungyon Cho (NFRI, 169-148 Gwahak-ro, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Seungyon Cho (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Jungyul Cho (Mobiis, Seoul, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Moohyun Cho (Department of Physics, POSTECH, Pohang, Gyeongbuk, South Korea)

Co-author in P2.033 Mode Converters for Low-loss Transmission-line of KSTAR LHCD system

Wook Cho (Heating and Current Drive Research Team, National Fusion Research Institute(NFRI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Seungyon Cho (NFRI, Daejeon, South Korea)

Seungyon Cho (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Seungyon Cho (System Technology Division, National Fusion Research Institute, Daejeon, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Hyoung-Kyu Cho (Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744, South Korea)

Co-author in P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events

K. Cho (Department of Physics, Sogang University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Chang-Ho Choi Choi (ITER Organization, Saint Paul Lez Durance, France)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Chang-Ho Choi (ITER Organization, Saint-Paul-lez-Durance, France)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Won Jae Choi (Strategy Division, National Fusion Research Institute, Deajeon, South Korea)

Co-author in P4.205 The Economic Benefits of Big Science R&D Program: With a Focus on KSTAR Program

Dae Jun Choi (Heating and Current Drive Research Team, National Fusion Research Institute(NFRI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Chang-Hwan Choi (Remote Handling & Hot Cell Complex Section, ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

C. H. Choi (ITER Organization, Route de Vinon-sur-Verdon – CS 90046, 13067 St Paul-lez-Durance Cedex, France)

Co-author in P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints

Bhargav Choksi (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Tomas Chraska (Tokamak, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00 Praha 8, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

Dikens R. Christian (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Lievin Christophe (THALES ELECTRON DEVICES SAS, 2, rue Marcel Dassault – BP 23 78141, Vélizy-Villacoublay Cedex, France)

Co-author in P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests

C. Chrobak (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

J. Chrzanowski (Institute of Physics, Maritime University of Szczecin, Waly Chrobrego 1-2, 70-500 Szczecin, Poland)

Co-author in P3.074 Influence of the geometry system on the effectiveness of polarimetric measurements in the thermonuclear plasma diagnostics

Yong Chu (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Yong Chu (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Hitesh H. Chudasma (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Youngbum Chun (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Young-Bum Chun (Nuclear Materials Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Sikun Chung (Tokamak Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

K. S. Chung (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Kyoung-Jae Chung (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Kyungjae Chung (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Kyoung-Jae Chung (Department of Nuclear Enigneering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

Hongsuk Chung (University of Science and Technology (UST), 217 Gajeongro, Yuseong, Daejeon, South Korea;Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeokdaero, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Wooho Chung (NFRI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Sikun Chung (Tokamak Technology, National Fusion Research Institute(NFRI), Daejeon, South Korea)

Co-author in P1.002 Design and Structural Analysis of the Upending Tool

Hongsuk Chung (nuclear fuel cycle process development, KAERI(Korea Atomic Energy Research Institute), Yuseong, Daejeon, South Korea;quantum energy chemical engineering, UST(University of science&technology), 217, Gajeong-ro, Yuseong-gu, Daejeon, 34113, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Wooho Chung (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Wooho Chung (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Lu Ci (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Sergio Ciattaglia (EUROfusion Consortium, Boltzmannstr.2, Garching 85748, Germany)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Sergio Ciattaglia (Power Plant Physics & Technology Department, EUROfusion, Garching, Germany)

Co-author in P1.197 EU DEMO safety and operating requirements. Issues and possible solutions

Sergio Ciattaglia (Power Plant Physics and Technology, EUROfusion PMU, Garching, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

Sergio Ciattaglia (EUROfusion Consortium, Boltzmannstr.2 Garching 85748, Germany)

Co-author in P2.199 Parametric explorative study of DEMO galleries pressurization in case of ex-vessel LOCA

Sergio Ciattaglia (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Sergio Ciattaglia (EUROfusion Consortium, Garching, Germany)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Sergio Ciattaglia (Eurofusion Consortium, Boltzmannstr.2, Garching 85748, Germany)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Daniel Ciazinsky (CEA, CADARACHE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Daniel Ciazynski (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Daniel Ciazynski (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Daniel Ciazynski (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Tindaro Cicero (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Tindaro Cicero (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019, Barcelona, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Tindaro Cicero (Fusion For Energy (F4E), Barcelona, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Marcello Cinque (CREATE, Università di Napoli Federico II, Napoli, Italy)

Jean-Francois Ciparisse (Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

Jean-Francois Ciparisse (Industrial Engineering, Associazione EUROFUSION-ENEA, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Jean Francois Ciparisse (Industrial Engineering, University of Rome Tor Vergata, Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Dragoslav Ciric (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

F. Cismondi (EUROfusion Consortium Programme Management Unit, Garching, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Fabio Cismondi (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Fabio Cismondi (PPPT Department, EUROfusion Consortium, Garching, Germany)

Co-author in P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL

Fabio Cismondi (Eurofusion-PPPT, Eurofusion, Garching, Germany)

Co-author in P3.128 Progress in EU-DEMO In-Vessel Components integration

Fabio Cismondi (EUROfusion, Garching, Germany)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Fabio Cismondi (Power Plant Physics & Technology Department, PMI, EUROfusion Consortium, Garching, Boltzmannstr. 2, Germany)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Ed Clark (Remote Applications in Challenging Environments (RACE), UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in P4.138 Status and Developments of the MASCOT telemanipulator system for JET Remote Maintenance

Jan Willem Coanen (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

Ignacio Cobo (CT Innova, Barrio La Agüera s/n, San Felices de Buelna 39409, Cantabria, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Ignacio Cobo (Fundación Leading Innova (CT-Innova), Santander, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Domenico Coccorese (Department of Industrial Engineering, CREATE/University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy)

Co-author in P3.132 Systems engineering approach for pre-conceptual design of DEMO divertor cassette

Valter Cocilovo (FSN, ENEA, Via E. Fermi 45, Frascati, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Stefano Coda (Swiss Plasma Center - EPFL, CH-1015 Lausanne, Switzerland)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Stefano Coda (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Stefano Coda (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Jan Willem Coenen (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Laurence Cogneau (DRT, CEA, 38000 Grenoble, France)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Matti Coleman (EUROfusion Consortium, Boltzmannstr.2, Garching 85748, Germany)

Matti Coleman (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Matti Coleman (Eurofusion Consortium, Boltzmannstr.2, Garching 85748, Germany)

Co-author in O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies

B. Colling (Nuclear Technology Department, UKAEA, Abingdon, United Kingdom)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Bethany Colling (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Clara Colomer (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Sergi Colominas (Analytical and Applied Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.165 Amperometric hydrogen sensors for molten metals

Sergi Colominas (Analytical Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.192 Lithium conducting ceramics for amperometric sensors in molten metals

Alvaro Combo (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Alvaro M. Combo (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Alvaro Combo (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Alvaro Combo (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Steve Combs (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.015 Developments in pellet injection technology for transient mitigation applications

Stephen K. Combs (ORNL, Oak Ridge (TN), United States)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Sean Conroy (Department of Physics and Astronomy, Applied Nuclear Physics, Uppsala University, Ångströmlaboratoriet, Lägerhyddsvägen 1, Uppsala, Sweden)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Sean Conroy (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation
Co-author in P2.053 High resolution neutron spectrometer system for ITER

Sean Conroy (Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P1.064 Calculation of the profile dependent neutron backscatter matrix for the JET neutron camera system

Toma Constantin (National Institute for Cryogenics and Isotopes Technologies - ICSI, Rm. Valcea, Romania)

Co-author in P4.155 Dynamic simulation of a multicomponent distillation column for D-T separation

Nilesh Contractor (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Garrard D. Conway (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Dave Coombs (Power and Active Operations, UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in O3B.1 The JET Materials Detritiation Facility for reducing radioactive waste liabilities

Dave Coombs (Culham Centre for Fusion Energy, Abingdon, Oxfordshire, United Kingdom)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Sam Cooper (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

David Cooper (RACE, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO

Bruno Coppi (MIT, 77 Massachusetts Avenue, Cambridge (MA), United States)

Co-author in P4.017 Feasibility study for an advanced nuclear fusion experiment

Bruno Coppi (MIT, Cambridge (MA), United States)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation

Valentina Corato (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Giovanni Corbucci (OCEM Energy Technology, Via della Solidarietà, 2-1/40056 Valsamoggia (BO), Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Claudia Corradino (DIEEI, Università degli Studi di Catania, Viale Andrea Doria, 6, Catania, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Yann Corre (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

C.M.B. Correia (LibPhysUC, Departamento de Física, Universidade de Coimbra, 3004-516 Coimbra, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Miguel Correia (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Carlos Correia (LIBFIS-UC, Departamento de Física, Universidade de Coimbra, 3004-516 Coimbra, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Carlos Correia (Departamento de Física, LIBFIS-UC, Universidade de Coimbra, Coimbra, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Miguel Correia (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Carlos Correia (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Carlos Correia (LibPhysUC, Departamento de Física, Universidade de Coimbra, Rua Larga da Universidade,P-3004-516 Coimbra, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

Miguel Correia (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

Carlos M.B. A. Correia (LibPhysUC, Departamento de Física, Universidade de Coimbra, 3004-516 Coimbra, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Miguel Correia (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Carlos M. B. A. Correia (LibPhysUC, Departamento de Física, Universidade de Coimbra, 3004-516 Coimbra, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Miguel Correia (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Pietro Costa (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Oriol Costa Garrido (Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia)

Co-author in P2.140 Thermal radiation analysis of DEMO tokamak

Rica Costa Pereira (Instituto de Plasmas e Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Stefan Costea (Institute for Ion Physics and Applied Physics, University of Innsbruck, Technikerstraße 25/3, 6020 Innsbruck, Austria)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Xavier Courtois (IRFM, CEA Cadarache, F-13108 Saint Paul Lez Durance, France)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

Xavier Courtois (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Xavier Courtois (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Steve Couturier (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

T. Craciunescu (Institute of Atomic Physics, Bucharest, Romania)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Teddy Craciunescu (Institute of Atomic Physics, Magurele, Ilfov, Romania;National Institute for Laser, Plasma & Radiation Physics, Magurele, Ilfov, Romania)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

T. Craciunescu (Institute of Atomic Physics, Magurele, Ilfov, Romania;Institute of Atomic Physics, Magurele, Ilfov, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Simon Cramp (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Bruno Crepel (General Electric, 90018 Belfort, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Fabio Crescenzi (FSN, ENEA, Frascati, Italy)

Co-author in P1.107 Residual stresses evaluation during Plasma Facing Units Hot Radial Pressing manufacturing process

Fabio Crescenzi (Fusion and Technology for Nuclear Safety and Security, ENEA, Via Enrico Fermi, 45 - 00044 Frascati, Italy)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Flavio Crisanti (ENEA, via Enrico Fermi 45, I-00044, Frascati, Italy)

Co-author in P2.005 The DTT device: alternative configurations

Flavio Crisanti (ENEA, Centro Ricerche Frascati, Italy, Frascati, Italy)

Co-author in P2.010 The DTT device: general layout

Flavio Crisanti (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Ion Cristescu (Karlsruhe Istitute for Technologies, Tritium Laboratory , Eggenstein-Leopoldshaffen, Germany)

Co-author in P4.156 Investigation of some critical scenarios due to various failures of ICSI Cryogenic Distillation System

Gabriele Croci (Physics, University of Milano-Bicocca, Milano, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

D. Croft (CCFE Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

David Croft (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

David Croft (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

D. Croft (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Oliver Crofts (RACE, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO

B. Crowley (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

Brendan Crowley (DIII-D National Fusion Facility, General Atomics, San Diego, United States)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

Nuno Cruz (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Nuno Cruz (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Nuno Cruz (Instituto Superior Técnio, Instituto de Plasmas e Fusão Nuclear, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Nuno Cruz (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Dario Andres Cruz Malagon (DENERG, Politecnico di Torino, Torino, Italy)

Co-author in P4.017 Feasibility study for an advanced nuclear fusion experiment

Gabor Cseh (Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Philippe Cuanillon (Ecole Polytechnique Fédérale de Lausanne, Institute of Condensed Matter Physics, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Antonio Cucchiaro (FSN, ENEA, Via E. Fermi 45, Frascati, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Antonio Cucchiaro (ENEA, Via Enrico Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

A. Cufar (Slovenian Fusion Association, Jozef Stefan Institute, Ljubljana, Slovenia)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

A. Cufar (Reactor Physics Department, Jozef Stefan Institute, SI-1000 Ljubljana, Slovenia, Slovenia)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Hu Cui (Faculty of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Geoffrey Cunningham (CCFE, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, Culham, United Kingdom)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Paul Curson (CCFE, Oxford, United Kingdom)

Co-author in P1.040 A SysML model of the tokamak subsystems involved in a DEMO pulse

Marian Curuia (Institute of Atomic Physics, Magurele, Ilfov, Romania;National R&D Institute for Cryogenics and Isotopic Technologies, Ramnicu Valcea, Romania)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

M. Curuia (Institute of Atomic Physics, Bucharest, Romania)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

M. Curuia (ICIT Rm. Valcea, Ramnicu Valcea, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Agata Czarnecka (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Tomasz Czarski (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Tomasz Czarski (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, 01-497 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Tomasz Czarski (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Gabriele D'Amico (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Gerardo D'Elia (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Masayuki Dairaku (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Samuele Dal Bello (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Samuele Dal Bello (Consorzio RFX, Padua, Italy)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Jean-Michel Dalin (CERN, Geneva, Switzerland)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

Mauro Dalla Palma (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Mauro Dalla Palma (Consorzio RFX, Padua, Italy)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Julius Damba (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

C. Danani (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Tongqiang Dang (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Jinendra Dangi (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Raju Daniel (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Igor Danilov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Fruzsina Daranyi (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Caroline Darbos (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Caroline Darbos (ITER Organization, St Paul Lez Durance, France)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Amita Das (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Rasesh Dave (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

R. Dave (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Sam Davis (F4E, 85748, Garching, Germany)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Sam Davis (JT-60 SA European Home Team, Boltzmannstrasse 2, D-85748 Garching, Germany)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Vladimir I. Davydenko (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Christian Day (Institute for Technical Physics, KIT - Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Christian Day (Institute for Technical Physics, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.164 Mercury ring pump proof-of-principle testing in the THESEUS facility

Christian Day (Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in P3.012 Fuelling technology for DEMO, state of the art
Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

Ian E Day (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Christian Day (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Chr. Day (Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.128 Progress in EU-DEMO In-Vessel Components integration

Marco De Angeli (Istituto di Fisica del Plasma - CNR, Via R. Cozzi 53, 20125 Milano, Italy)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Guillermo de Arcas (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Alfredo De Blas (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Vanessa de Castro (Department of Physics, University Carlos III Madrid, Leganes, Spain)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Alfonso De Castro (Laboratorio Nacional de Fusión, CIEMAT, Avda Complutense 40, 28040 Madrid, Spain)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Benoit De Gentile (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Eduardo De la Cal (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Eduardo de la Cal (CIEMAT, Madrid, Spain)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Massimiliano De Magistris (Dept. Of Electric Engineering and Information Tehcnology, Univ. Di Napoli “Federico II”, Napoli, Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Pascal de Marne (Max-Planck-Institut fuer Plasmaphysik, 85748 Garching, Germany)

Co-author in P4.083 Standardization of the hard- and software used to operate manipulators at ASDEX Upgrade

Gianluca De Masi (Consorzio RFX (CNR, ENEA, INFN, Universita' di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 – Padova, Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Domenico De Meis (Unità Tecnica Fusione, ENEA-Frascati, Frascati, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Michela De Muri (Consorzio RFX, Pdova, Italy;INFN, v.le dell’Università 2, I-35020, Legnaro, Padova, Italy)

Co-author in P4.007 Final design and prototyping of the SPIDER caesium ovens

Michela De Muri (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Javier de Prado (Materials Science and Engineering Area, Rey Juan Carlos University, C/ Tulipan S/N 28933 Mostoles (Madrid), Spain)

Co-author in P2.188 Potential improvements of W-Eurofer first wall brazed joint using alloyed powders filler

Gregory De Temmerman (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex, France)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Gregory De Temmerman (ITER Organization, St Paul Lez Durance, France)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Gregory De Temmerman (ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic

Gianmaria de Tommasi (CREATE, Università di Napoli Federico II, Napoli, Italy)

Peter De Vries (ITER Organization, St. Paul-Lez-Durance, Cadarache, France)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Peter Christiaan De Vries (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Shaun de Witt (UKAEA-CCFE, Abingdon, United Kingdom)

Co-author in P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling

Shaun de Witt (Theory and Modelling, CCFE, Abingdon, United Kingdom)

Co-author in P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE

Buchenauer Dean (Sandia National Laboratories, Livermore, CA, United States)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Hans Decamps (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex, France)

Hans Decamps (ITER, St Paul Lez Durance Cedex , France)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Hans Decamps (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex , France)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Hans Decamps (ITER Organization, Route de Vinon-sur-Verdon, 13067 St Paul Lez Durance, France)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Christelle Decanis (DEN, CEA, Saint Paul-lez-Durance, France)

Co-author in P2.017 Comparison of detritiation techniques for purely tritiated metallic waste

Patrick Decool (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Patrick Decool (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Patrick Decool (CEA, CADARACHE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Patrick Decool (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Fabio Degli Agostini (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P2.144 Application of the VTTJ cold junction technique to fusion reactor relevant geometry and materials

J. deGrassie (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Alessandro Del Nevo (ENEA CR Brasimone, Località Brasimone 40032, Camugnano (BO), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Alessandro Del Nevo (ENEA CR Brasimone, Camugnano, BO, Italy)

Co-author in P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL

Alessandro Del Nevo (ENEA C.R. Brasimone, 40032 Camugnano (BO), Italy)

Co-author in P2.148 CFD analysis of WCLL breeding blanket module design
Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Alessandro Del Nevo (C.R. Brasimone, ENEA, Camugnano (BO), Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Alessandro Del Nevo (ENEA FSN-ING-PAN, ENEA CR Brasimone, Località Brasimone, 40032, Camugnano (BO), Italy)

Co-author in P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold

Alessandro Del Nevo (CR Brasimone, Enea, Camugnano (BO), Italy)

Co-author in P2.150 CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module

Alessandro Del Nevo (ENEA FSN-ING-PAN, ENEA Brasimone, 40032 Camugnano (BO), Italy)

Co-author in P2.153 Consistent post-test analyses of LIFUS5 experiment

Alessandro Del Nevo (ENEA , Brasimone Camugnano, Italy)

Co-author in P3.135 Rationale and Method for design of DEMO WCLL Breeding Blanket Poloidal Segmentation

D. Del Serra (Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 2-56126, Pisa, (PI), Italy)

Co-author in P1.140 Three-dimensional condensation regime of steam injected into water at sub-atmospheric conditions

Jean-Marc Delaplanche (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Elise Delchambre (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Chu Delin (Institute of Applied physics, Army Officer Academy of PLA, Hefei city, Anhui Province, P.R.China 230031, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

Antonio Della Corte (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Antonio Della Corte (Superconductivity Laboratory, ENEA, 00044 Frascati, Italy)

Co-author in P1.086 Cost Estimate for the Toroidal Field Coil System of DEMO

Mattia Dellabiancia (Centrum výzkumu Řež s.r.o., Husinec-Řež, Czech Republic)

Co-author in P2.108 Thermal-hydraulic design of water cooled first wall of the fusion reactor under DEMO conditions

Georges Dellopoulos (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Etienne Delmas (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

R.S. Delogu (Consorzio RFX, Padova, Italy)

Co-author in P4.039 Inverse heat flux evaluation from thermographic measurements in SPIDER

Lena Delpech (CEA, IRFM, F-13108, Saint-Paul-lez-Durance, France)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

David Demange (ITEP, Karlsruhe Institute für Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK

David Demange (Institute for Technical Physics, Tritium Laboratory, KIT, Karlsruhe, Germany)

Co-author in O1A.1 Tritium modeling in HCPB breeder blanket at a system level: a preliminary parametrical approach

Aleksandra Dembkowska (Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology, Szczecin, Al. Piastów 19, 70-310 Szczecin, Poland)

Co-author in P1.083 Experimental stand for thermal-hydraulic tests of forced flow conductors using water at room temperature

N. den Harder (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, FOM Institute DIFFER – Dutch Institute for Fundamental Energy Research, Eindhoven, Netherlands)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Weiping Deng (School of Nuclear Science and Technology, USTC, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Corinne Desgranges (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Cheng Desheng (Institute of Applied physics, Army Officer Academy of PLA, Hefei city, Anhui Province, P.R.China 230031, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

A. Devred (on behalf of the ITER Central Team, Domestic Agency and Supplier Magnet Groups, France)

Co-author in I3.1 The ITER Magnet System: Configuration and Construction Status

Arnaud Devred (Magnet Division, ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex, France)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Kalpeshkumar R. Dhanani (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

C.P. Dhard (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Chandra Prakash Dhard (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

H. Dhola (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Hiteshkumar Dhola (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

Jasraj Dhongde (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Jasraj R. Dhongde (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Fabio Di Fonzo (Center for Nano Science and Technology, Istituto Italiano di Tecnologia, Via G. Pascoli 70/3, Milano, Italy)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Giuseppe Di Gironimo (CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Giuseppe Di Gironimo (Department of Industrial Engineering, CREATE - University of Naples Federico II, P.le Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.009 The DTT device: first wall, vacuum vessel and cryostat structure

Giuseppe Di Gironimo (Industrial Engineering, CREATE - UNIVERSITY OF NAPLES FEDERICO II, p.le Tecchio 80 Napoli, Italy)

Co-author in P3.135 Rationale and Method for design of DEMO WCLL Breeding Blanket Poloidal Segmentation

Giuseppe Di Gironimo (Department of Industrial Engineering, CREATE/University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy)

Co-author in P3.132 Systems engineering approach for pre-conceptual design of DEMO divertor cassette

Giuseppe Di Gironimo (Department of Industrial Engineering (DII), Create Consortium/University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Giuseppe Di Gironimo (Department of Industrial Engineering (DII), CREATE Consortium/University of Naples Federico II, Piazzale Tecchio 80 – 80125 Napoli, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Pietro Alessandro Di Maio (Dipartimento di Energia, Ingegneria dell'Informazione e Modelli Matematici, University of Palermo, Palermo, Italy)

Pietro Alessandro Di Maio (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Pietro Alessandro Di Maio (Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Palermo, Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Pietro Alessandro Di Maio (Dipartimento di energia, Ingegneria dell'Informazione e modelli matematici, University of Palermo, Viale delle Scienze, Palermo, Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Pietro Alessandro Di Maio (Dipartimento di Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, I-90128 Palermo, Italy)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Pietro Alessandro Di Maio (DEIM, University of Palermo, Viale delle scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Pietro Alessandro Di Maio (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128 Palermo, Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Luigi Di Pace (FSN, ENEA Frascati, Frascati, Italy)

Co-author in P4.206 The project & quality management activities in ENEA fusion department

Ivan Di Piazza (CR Brasimone, Enea, Camugnano (BO), Italy)

Co-author in P2.150 CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module

Ivan Di Piazza (ENEA C.R. Brasimone, 40032 Camugnano (BO), Italy)

Co-author in P2.148 CFD analysis of WCLL breeding blanket module design

E. Di Pietro (JT-60SA EU-Home Team, Fusion for Energy, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Enrico Di Pietro (F4E, 85748, Garching, Germany)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Enrico Di Pietro (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Ester Diaz (Gent University, St. Pietersnieuwstraat 33, 9000 Gent, Belgium)

Co-author in P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK

Mathias Dibon (Max-Planck-Institute for Plasmaphysics, Garching, Germany;Technical University Munich, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Eberhard Diegele (PMU, EUROfusion, Garching, Germany)

Co-author in I4.1 European-WP development on functional materials for diagnostics and H&CD systems in future fusion reactors

Javier Dies (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Miglena Dimitrova (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Gheorghe Dinescu (National Institute for Laser, Plasma and Radiation Physics, 409 Atomistilor Street, Magurele, Romania;Faculty of Physics, University of Bucharest, 405 Atomistilor Street, Magurele, Romania)

Co-author in P3.108 Production of tungsten particles from a radiofrequency plasma jet

R. Ding (Oak Ridge Institute for Science and Education, Oak Ridge, TN, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Fang Ding (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Kaizhong Ding (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

A. Dinklage (Max Planck Institute for Plasma Physics, Wendelsteinstraße 1, 17489 Greifswald, Germany)

Co-author in I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator

Wunderlich Dirk (Max Planck InstitutfürPlasmaphysik , Boltzmannstraße 2 D-85748 Garching, Germany)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Timo Dittmar (IEK - Plasmaphysik, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Artem Dmitriev (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Alexey Dnestrovskiy (Plasma Physics, Kurchatov Institute, Moscow, Russian Federation)

Co-author in P4.022 Numerical and semianalytical treatments of neutral beam current drive in DEMO-FNS

Petr Dobias (ENSSAT, rue de Kerampont 6, 22305 Lannion cedex, France)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Louis Doceul (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Louis Doceul (CEA Cadarache, Saint-Paul-lez-Durance, France)

Co-author in P1.137 Qualification, manufacturing and assembly of the WEST divertor structure and coils

R.P. Doerner (Center for Energy Research, University of California, San Diego, La Jolla, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Ivan Dofek (Technical calculations department, Centrum vyzkumu Rez, Hlavni 130, 250 68, Rez, Czech Republic)

Co-author in P1.169 The current status and challenges of the PbLi cold trap development undertaken at CVR

Bernhard Dolensky (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P4.179 Mechanical testing of the IFMIF HFTM-DC prototype during operation in the HELOKA-LP helium loop

Frederic Dolizy (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Phani Domalapally (Centrum výzkumu Řež s.r.o., Husinec-Řež, Czech Republic)

Co-author in P2.108 Thermal-hydraulic design of water cooled first wall of the fusion reactor under DEMO conditions

Fred Domptail (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

F. Domptail (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Danilo Dongiovanni (FSN, ENEA, Frascati, Italy)

Co-author in P2.199 Parametric explorative study of DEMO galleries pressurization in case of ex-vessel LOCA

Stephen E. Donnelly (School of Computing and Engineering, University of Huddersfield, Huddersfield, HD1 3DH, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

Andrea Doria (FSN - Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide

Sebastian Dormido-Canto (Informatica y Automatica, UNED, Madrid, Spain)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Christopher Dorn (Sales and Marketing, Materion Beryllium and Composites, Elmore, OH, United States)

Co-author in P4.114 Critical processing considerations for ITER first wall beryllium tiles

Ander Dorronsoro (JEMA, Paseo del Circuito 10, 20160 Lasarte-Oria Gipuzkoa, Spain)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Vaclav Dostal (Department of Energy Engineering, Czech Technical University In Prague, Zikova 4, 166 36 Prague 6, Czech Republic)

Co-author in P2.200 Effective water cooling of very hot surfaces during the LOCA accident

Vaclav Dostal (Energy engineering, Czech Technical University In Prague, Prague, Czech Republic)

Co-author in P2.197 Study of the Cooling Systems with S-CO2 for the DEMO Fusion Power Reactor

Olivier Doyen (Laboratoire des Technologies d’Assemblage, CEA, F-91191 Gif sur Yvette, France)

Co-author in O5A.4 Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions

Mirela Draghia (IS TECH, 69 Take Ionescu, Timisoara, Romania)

Giovanni Drago (ASG Superconductors SpA, Corso F.M. Perrone 73 R - Genova, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Martin Draksler (Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia)

Co-author in P2.140 Thermal radiation analysis of DEMO tokamak

Aleksandr N. Dranitchnikov (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Matthias Dremel (Plant Engineering Department, Vacuum Section, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067- St. Paul Lez Durance Cedex, France)

Co-author in P4.162 Dynamic model of ITER cryo-pumps cryogenic distribution system: torus pumping and regeneration scenarios

Matthais Dremel (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Aleksander Drenik (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany;Jožef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Jean-Marc Drevon (Bertin Systèmes Instrumentation, Bertin Technologies, Aix-en-Provence, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Jean-Marc Drevon (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Philipp Drews (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Krzysztof Drozdowicz (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

K. Drozdowicz (Institute of Nuclear Physics, Polish Academy of Sciences, PL-31-342 Krakow, Poland)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Liang Du (Robotics Institute, Shanghai Jiao Tong University, Shanghai, China)

Co-author in P1.142 Design of a Standalone Joint Module toward Real EAST In-vessel Operation Use

Xuru Duan (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

X.R. Duan (Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Richard Duban (Faculty of Nuclear and Physical Engineering, Czech Technical University, Prague 2, Czech Republic, Czech Republic)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Andrii Dubinko (SCK-CEN, Mol, Belgium;SCK-CEN, Mol, Belgium)

Co-author in P3.105 Microstructural and micro-mechanical changes in tungsten under high flux plasma exposure

Jeremie Dubray (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

Jeremie Dubray (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Jeremie Dubray (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Jeremie Dubray (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Maksim Dubrov (National Research Centre «Kurchatov Institute», Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Jean-Luc Duchateau (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Robert Duckworth (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Thibault Dufour (Thales SESO SAS, 530, rue Frédéric Joliot 13593 Aix-en-Provence Cedex 3, France)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Pierre Dumortier (LPP-ERM/KMS, Brussels, Belgium)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Pierre Dumortier (Laboratory for Plasma Physics, LPP-ERM/KMS. TEC Partner, Brussels, Belgium)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

A. Dunaevsky (Tri Alpha Energy, Inc, Rancho Santa Margarita, CA 92688, United States)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

D. Dunai (Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest, Hungary)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

D. Dunai (Wigner RCP, Hungarian Academy of Science, Budapest, Hungary)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Daniel Dunai (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Ivan Duran (Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00, Prague, Czech Republic)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Ivan Duran (Institute of Plasma Physics ASCR, Praha 8, Czech Republic)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

Ivan Duran (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Praha 8, Czech Republic)

Co-author in P1.051 Signal processing for the extreme environment Hall sensors

Ivan Duran (Tokamak, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00 Praha 8, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

Ivan Duran (Institute of Plasma Physics, ASCR v.v.i. , Za Slovankou 3, 182 00 Prague, Czech Republic)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Frederic Durodie (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Frederic Durodie (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Frederic Durodie (LPP-ERM/KMS, Brussels, Belgium)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Frederic Durodie` (Laboratory for Plasma Physics, LPP-ERM/KMS. TEC Partner, Brussels, Belgium)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Pramit Dutta (Remote Handling Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

P. Dutta (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

S. Dutta (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Basil P. Duval (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Basil Duval (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

O. D’Arcangelo (ENEA, Frascati, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Ocleto D’Arcangelo (Dipartimento FSN, ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Tim Eade (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

T. Eade (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Tim Eade (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.159 Coupled neutronic and engineering analysis of the Helium Cooled Pebbled Bed with Be12Ti

Russel Eaton (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Russell Eaton (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Rob Ebeling (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Marica Eboli (DICI, University of Pisa, Largo Lucio Lazzarino 2, 56122, Pisa, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Marica Eboli (DICI, University of Pisa, Largo Lucio Lazzarino, 2 - 56122 Pisa, Italy)

Co-author in P2.153 Consistent post-test analyses of LIFUS5 experiment

Jon Echeberria (Departament of Materials, CEIT-IK4, Paseo Manuel Ladrizábal 15, E-20018 San Sebastián, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Christian Eckardt (PVA Industrial Vacuum Systems GmbH, Im Westpark 10-12, 35435 Wettenberg, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Yuki Edao (Department of Blanket Systems Research, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.152 Effect of halogenated gas on detritiation efficiency of the detritiation system

Yuki Edao (Department of Blanket Systems Research, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.168 Improvement of quantitative analysis method of tritium using hydrophobic catalyst

Trevor Edlington (FIRCROFT, Lingley House, 120 Birchwood Blvd, Warrington, Cheshire WA3 7QH, United Kingdom)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Trevor Edlington (Fircroft, Lingley House, 120 Birchwood Point, Birchwood Boulevard Warrington, Cheshire, United Kingdom)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Paul Edwards (Tokamak Engineering Department, ITER, St Paul-lez-Durance, France)

Co-author in P4.126 Blanket manifold final design and validation

Dan J. Edwards (Pacific Northwest National Laboratory, Richland, WA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Konstantin Egorov (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Konstantin Egorov (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Josu Eguia (Design, Manufacturing and Assembly, IK4-TEKNIKER, Eibar, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Josu Eguia (Mechanical Engineering, IK4-TEKNIKER, Eibar, Spain)

Co-author in P2.128 Analysis of a portable machine for post-welding operations within the vacuum vessel of ITER

Gunnar Ehrke (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event

Horst Eixenberger (E1 - tokamak scenario development, Max Planck institute for plasma physics, Garching, Germany)

Co-author in P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade

Horst Eixenberger (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Didier Elbeze (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

J.D. Elder (Institute for Aerospace Studies, University of Toronto , Toronto, Canada)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Sayf Elgriw (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Vladimir Elkin (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Robert Ellis (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

Robert Ellis (Plasma Physics Laboratory, Princeton University, Princeton, New Jersey, United States)

Co-author in P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand

George Ellwood (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Sean Emery (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Anna Encheva (Tokamak Department, ITER Organization, St.Paul lez Durance Cedex, France)

Co-author in P2.129 Progress on the Design Development and Prototype Manufacturing of the ITER In-Vessel Coils

Monica Enculescu (National Institute of Materials Physics, Magurele, Romania)

Co-author in P2.176 “FAST brazing” technology for W multi-metal laminates
Co-author in P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components

Michael Endler (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Michael Endler (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator

Michael Endler (Max Planck Institut für Plasmaphysik, 17491 Greifswald, Germany)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Jan Engels (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.180 Yttrium oxide coatings as tritium permeation barriers

Rustam Enikeev (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Stephan Enoch (Institut Fresnel, Aix-Marseille Université, CNRS, Centrale Marseille, UMR 7249, F-13013, Marseille, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Rafael Enparantza (Design, Manufacturing and Assembly, IK4-TEKNIKER, Eibar, Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Slavomir Entler (Energy Engineering, CTU in Prague, FME, Prague-6, Czech Republic;Institute of Plasma Physics CAS, Za Slovankou 3, 182 00 Praha 8, Czech Republic)

Co-author in P2.109 Heat transfer enhancement of the DEMO first wall water cooling

Slavomir Entler (Institute of Plasma Physics, Czech Academy of Sciencies, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.197 Study of the Cooling Systems with S-CO2 for the DEMO Fusion Power Reactor

Slavomir Entler (Institute of Plasma Physics, Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.200 Effective water cooling of very hot surfaces during the LOCA accident

Slavomir Entler (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Praha 8, Czech Republic)

Co-author in P1.051 Signal processing for the extreme environment Hall sensors

Slavomir Entler (Tokamak, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00 Praha 8, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

Slavomir Entler (Institute of Plasma Physics, ASCR v.v.i. , Za Slovankou 3, 182 00 Prague, Czech Republic)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Andreas Epp (Ampegon AG, Spinnereistrasse 5, CH-5300 Turgi, Switzerland)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Goran Ericsson (Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P1.064 Calculation of the profile dependent neutron backscatter matrix for the JET neutron camera system

Goran Ericsson (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Jacob Eriksson (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Gennadiy P. Ermak (Usikov Institute for Radiophysics and Electronics NAS of Ukraine, 12, Akad. Proskura str., 61085 Kharkov, Ukraine)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Cristina Escudero (Materials and Manufacturing, Ceit-IK4, San Sebastian, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Basilio Esposito (Dipartamento FSN, ENEA C. R. Frascati, E. Fermi 45, 00044 Frascati(Roma), Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

B. Esposito (ENEA C. R. Frascati, Dipartimento FSN, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Basilio Esposito (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Basilio Esposito (FSN, ENEA C.R. Frascati, Via E. Fermi 45, Frascati-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Sergio Esquembri (UPM-I2A2, Technical University of Madrid, 28031 Madrid, Spain)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Sergio Esquembri (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Hans Gunter Esser (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Co-author in P4.067 Improving accuracy of Penning gauge spectroscopy for the determination of hydrogen isotope H/D ratios

Gustavo A. Esteban (Nuclear Engineering and Fluid Mechanics, University of the Basque Country (UPV/EHU), Bilbao, Spain)

Co-author in P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi

Teresa Estrada (CIEMAT, Madrid, Spain)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

WPHCD Team EUROfusion (Power Plant Physics and Technology Unit (PPPU), EUROfusion, D-85748, Garching Bei Munchen, Germany)

Co-author in P4.025 Integrating a distributed antenna in DEMO: requirements and challenges

EUROfusion MST1 Team (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

the EUROfusion MST1 Team (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Dagmar Ewert (Institut für Textil- und Verfahrenstechnik, Körschtalstraße 26, 73770 Denkendorf, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Marco Fabbri (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Emiliano Fable (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink

Michael Faitsch (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Radek Fajtl (TechSoft Engineering spol. s r.o., Na Pankráci 322/26, 140 00 Praha 4 - Nusle, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Dragos Falie (Plasma Phisics and Nuclear Fusion, National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

D. Falie (Institute of Atomic Physics, Magurele, Ilfov, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Maria Carmen Falvo (University of Rome Sapienza, Rome, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Ling Fang (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Jose Fano (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Ursel Fantz (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Ursel Fantz (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Giovanni Faoro (COELME Costruzioni Elettromeccaniche S.p.A., via G. Galilei n° 1/2, 30036 S. Maria di Sala (Venezia), Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Denis Fappani (Thales SESO SAS, 530, rue Frédéric Joliot 13593 Aix-en-Provence Cedex 3, France)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Gonzalo Farias (Escuela de Ingenieria Electrica, Pontificia Universidad Catolica de Valparaiso, Valparaiso, Chile)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Daniela Farina (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Daniela Farina (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Fioravante Fasce (POSEICO, via Pillea 42-44, 16152 Genova, Italy)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Damien Fasel (SB-SPC, EPFL, Lausanne, Switzerland;SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Damien Fasel (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

Damien Fasel (Swiss Plasma Center, Lausanne, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Damien Fasel (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Damien Fasel (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Diego Faso (CECOM S.r.l., Via Tiburtina – Guidonia Montecelio - Roma, Italy)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Ambrogio Fasoli (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Daniele Fasolo (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Alexandr S. Fateev (Usikov Institute for Radiophysics and Electronics NAS of Ukraine, 12, Akad. Proskura str., 61085 Kharkov, Ukraine)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Luca Fattorini (Dipartimento di Fisica, Universitá degli Studi Milano Bicocca, Piazza della Scienza 3, 20126 Milano, Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Helmut Faugel (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Helmut Faugel (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P3.033 ICRF system efficency

H. Faugel (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Team FDS (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel

Russell Feder (Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Russell Feder (Princeton Plasma Physics Laboratory, Princeton, NJ, United States)

Co-author in P3.158 Breeding Blanket Nuclear Analysis and Nuclear Data Transfer For Multiphysics Analysis Using Attila

R. Feder (Princeton Plasma Physics Laboratory, Princeton, New Jersey, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Bonomo Federica (Consorzio RFX, Corso Stati Uniti 4, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Gianfranco Federici (Power Plant Physics & Technology Department, PMI, EUROfusion Consortium, Garching, Boltzmannstr. 2, Germany)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Gianfranco Federici (Programme Management Unit, Eurofusion, Garching, Germany)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Gianfranco Federici (Power Plant Physics & Technology Department, EUROfusion, Garching, Germany)

Co-author in P1.197 EU DEMO safety and operating requirements. Issues and possible solutions

Gianfranco Federici (Power Plant Physics and Technology, EUROfusion PMU, Garching, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

Gianfranco Federici (EUROfusion PMU, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

A. Fedorov (Research and Innovation, NRG, Petten, Netherlands)

Co-author in P3.161 Post irradiation examination of High Dose irradiated Beryllium (HIDOBE-02) in the High Flux Reactor

Alexander Fedoseev (State Scientific Center – Research Institute of Atomic Reactors, Dimitrovgrad, Russian Federation)

Co-author in P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels

Eduard Feldbach (Institute of Physics, University of Tartu, Tartu, Estonia;LSPM UPR3407 CNRS, Université Paris 13, 99 avenue J-B. Clément, 93430 Villetaneuse, France)

Co-author in P2.190 Spinel based optical materials for fusion applications

Federico Felici (Eindhoven University of Technology, Mechanical Engineering, Control Systems Technology, Eindhoven, Netherlands)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Federico Felici (Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, Netherlands)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Federico Felici (Faculty of Mechanical Engineering, Control Systems Technology Group, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, Netherlands)

Co-author in P2.044 Plasma internal profile control using IDA-PBC: Application to TCV

Francesco Fellin (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Joris Fellinger (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Joris Fellinger (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Joris Fellinger (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Joris Fellinger (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Joris Fellinger (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Robert Felton (CCFE Fusion Association, Culham Centre for Fusion Energy, Culham Science Centre, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Robert Felton (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation
Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

R. Felton (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Robert Felton (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Changle Feng (Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE

S.Y. Feng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China;Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Kaiming Feng (Center For Fusion Science, Southwestern Institute of Physics (SWIP), Chengdu, Sichuan, China)

Co-author in P4.201 Neutronics study on HCCB blanket for CFETR

Chunhua Feng (Institute of Physics, Chinese Academic of Science, Beijing, China)

Co-author in P4.097 Development of a quasi-steady state high voltage power supply based on Marx generator

Jiabo Feng (Robotics Institute, Shanghai Jiao Tong University, Shanghai, China)

Co-author in P1.142 Design of a Standalone Joint Module toward Real EAST In-vessel Operation Use

Fabien Ferlay (IRFM, CEA, Saint Paul Lez Durance, France)

Co-author in P4.137 Operators' accessibility studies using virtual reality

Fabien Ferlay (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Fabien Ferlay (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Marc Ferlet (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Marc Ferlet (IRFM, CEA, Saint-Paul-Lez-Durance, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

A. Fernandes (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

A. Fernandes (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

A. Fernandes (Instituto de Plasmas e Fusao Nuclear,Instituto Superior Technico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Ana Fernandes (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Ana Fernandes (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

A. Fernandes (Instituto de Plasmas e Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Ana Fernandes (Instituto Superior Técnio, Instituto de Plasmas e Fusão Nuclear, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Ana Fernandes (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Pilar Fernandez (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Ivan Fernandez (CIEMAT, Avda. Complutense 40, 280 40, Spain)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

Pilar Fernandez (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Ivan Fernandez (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

Ivan Fernandez (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P2.162 Preliminary system modelling for the EUROfusion Dual Coolant Lithium Lead blanket

Ivan Fernandez (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Ivan Fernandez-Berceruelo (Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

Ivan Fernandez-Berceruelo (Fusion National Laboratory, CIEMAT, Avda. Complutense, 40, 28040 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Giuseppe Ferro (Ing. Civile e Ing. Informatica, Università di Roma, Tor Vergata 0133 Roma, Italy, Università di Roma, Tor Vergata, Tor Vergata-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Alberto Ferro (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Alberto Ferro (Power System, Consorzio RFX, PADOVA, Italy)

Co-author in P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA

John R. Ferron (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

Chiara Fiamozzi Zignani (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Walter H. Fietz (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Waldemar Figacz (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Waldemar Figacz (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Lorenzo Figini (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Lorenzo Figini (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Lorenzo Figini (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Joao Figueiredo (Instituto de Plasmas e Fusao Nuclear,Instituto Superior Technico, Universidade de Lisboa, Lisboa, Portugal;EUROfusion Programme Management Unit, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Antonio Figueiredo (A. Silva Matos, Apartado 8, 3740-809, Sever do Vouga, Portugal)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Joao Figueiredo (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal;Culham Centre for Fusion Energy, Culham, United Kingdom)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

J. Figueiredo (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Lisboa, Portugal;EUROfusion Programme Management Unit, JET, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Nicolas Fil (Engineering, In-vessel components and Projects Department, CEA, French Alternative Energies and Atomic Energy Commission, 13108, Saint Paul lez Durance, France)

Co-author in P1.027 Electron Emission Under Uniform Magnetic Field of Materials For Fusion And Spatial Applications

Michele Fincato (Consorzio RFX, Padova, Italy)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Claudio Finotti (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Claudio Finotti (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade

Claudio Finotti (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Mehdi Firdaouss (CEA, F-13108 St Paul-Lez-Durance, France)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Mehdi Firdaouss (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Mehdi Firdaouss (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Ulrich Fischer (Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.153 Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO

Ulrich Fischer (KIT, Karlsruhe, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

U. Fischer (Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Ulrich Fischer (Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES

Ulrich Fischer (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P4.203 Neutronics analysis of a stellarator power reactor based on the HELIAS concept

Ulrich Fischer (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics

Ulrich Fischer (Institute for Neutron Physics and Reactor Technology , Karlsruhe Institute of Technology , Eggenstein-Leopoldshafen, Germany)

Co-author in P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria

Ulrich Fischer (Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Karlsruhe, Germany)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Ulrich Fischer (INR, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Ulrich Fischer (INR-NK, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

B. Fishler (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

D. Flammini (ENEA, Dipartimento Fusione e tecnologie per la Sicurezza Nucleare, Via E. Fermi 45, 00044 Frascati, Italy)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Davide Flammini (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati, Italy)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Davide Flammini (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Davide Flammini (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Michael Fleming (UK Atomic Energy Authority (CCFE), Culham Science Centre,, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

P. Flower (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Nicola Fonnesu (Department of Fusion and Nuclear Safety Technology, ENEA, 00044 Frascati (Rome), Italy;Department of Industrial Engineering, University of Rome 'Tor Vergata', 1, Via del Politecnico, 00133 Rome, Italy)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

Nicola Fonnesu (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

for the W7-X Team (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung - Plasmaphysik, 52425 Jülich, Germany;Max Planck Institut für Plasmaphysik, 17491 Greifswald, Germany;CIEMAT, Madrid, Spain;IPPLM, Warsaw, Poland;Wigner RCP, Budapest, Hungary;Princeton Plasma Physics Laboratory, Princeton, NJ, United States;IST, Lisbon, Portugal;CEA, Cadarache, France;PTB, Braunschweig, Germany;Los Alamos Nat’l Lab, NM, United States;Oak Ridge Nat’l Lab, TN, United States;Consorzio RFX, Padova, Italy;ENEA, Frascati, Italy;Innsbruck University, Innsbruck, Austria;ERM Brussels, Brussels, Belgium;Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna, Austria;Aalto University, Helsinki, Finland;University of Seville, Seville, Spain;Technical University of Eindhoven, Eindhoven, Netherlands;Cagliari University, Cagliari, Italy;University of Wisconsin, Madison, WI, United States;National Institute for Fusion Science, Toki, Japan)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Laurent Forest (Laboratoire des Technologies d’Assemblage, CEA, F-91191 Gif sur Yvette, France)

Co-author in O5A.4 Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions

Laurent Forest (DEN, DM2S, SEMT, CEA-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Nicola Forgione (DICI, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy)

Co-author in P2.148 CFD analysis of WCLL breeding blanket module design

Nicola Forgione (DICI, University of Pisa, Largo Lucio Lazzarino, 2 - 56122 Pisa, Italy)

Co-author in P2.153 Consistent post-test analyses of LIFUS5 experiment

Nicola Forgione (Department of Civil and Industrial Engineering, Università di Pisa, Largo Lucio Lazzarino 2, 56122, Pisa, Italy)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Nicola Forgione (Dipartimento di Ingegneria Civile e Industriale , University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy)

Co-author in P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis

Alessandro Formisano (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Alessandro Formisano (Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Tomasz Fornal (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Tomasz Fornal (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Tomasz Fornal (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Liam Forsythe (CCFE, Culham, United Kingdom)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Ruggero Forte (Energy, Information and Mathematical Models Department (DEIM), Palermo University, Palermo, Italy)

Co-author in P3.085 Modeling of ITER TF cooling system through 2D thermal analyses and enthalpy balance

Luigi Fortuna (DIEEI, Università degli Studi di Catania, Viale Andrea Doria, 6, Catania, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Elzbieta Fortuna-Zalesna (Department of Materials Science, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Joao Fortunato (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Arnaud Fossen (ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Jorge Fradera (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Laetitia Frances (ITEP, Karlsruhe Institute für Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK

Luca Franchin (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Joachim Franck (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Thomas Franke (EUROfusion Consortium and Max-Planck Institut für Plasmaphysik, Garching, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Thomas Franke (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany;Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Paolo Franz (Consorzio RFX, 35127 Padova, Italy)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Paolo Franz (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Fabrizio Franza (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Fabrizio Franza (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.130 Identification of Blanket design points using an integrated multi-physics approach

Mattia Frasca (DIEEI, Università degli Studi di Catania, Viale Andrea Doria, 6, Catania, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Fabrizio Frascati (FSN-ING-PAN, ENEA Brasimone, Camugnano (BO), Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Antonio Frattolillo (ENEA, Via E. Fermi 45, 00044 Frascati, Italy)

Co-author in P4.148 The coolant purification system in DEMO: candidate technologies, requirements and interfaces

Antonio Frattolillo (ENEA C.R. Frascati, 00044 Frascati, Rome, Italy)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Antonio Frattolillo (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

A. Frattolillo (ENEA, Frascati, Italy)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Antonio Frattolillo (ENEA C.R. Frascati, via Enrico Fermi, 45 Frascati (Rome), Italy)

Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

Cousin Frederic (Nuclear Safety Department, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Cadarache, Saint-Paul-lez-Durance, 13115, France)

Co-author in P4.195 ASTEC simulations of dust resuspension in fusion containments compared with the “STARDUST” experimental data

Marcel Frei (Ampegon AG, Turgi, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Michaele Freisinger (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Co-author in P4.067 Improving accuracy of Penning gauge spectroscopy for the determination of hydrogen isotope H/D ratios

Marko Fricke (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.093 Commissioning of the Wendelstein 7-X Quench-Detection-System
Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

Jean-Pierre Friconneau (ITER, St Paul Lez Durance, France)

Co-author in P4.131 ITER Hot Cell – Remote Handling System maintenance overview

David Fridrich (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic;Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Břehová 7, 115 19 Prague 1, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Thomas Friedrich (PLANSEE SE, 6600 Reutte, Austria)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Sebastian Friese (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany)

Co-author in P4.078 Experimental and numerical studies of the shutter dynamics for the ITER core CXRS diagnostic

Domenico Frigione (ENEA, C.R. Frascati, Roma, Italy)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Pierre-Etienne Frigot (European Joint Undertaking for ITER and the Development of Fusion Energy (F4E), Barcelona, E-08019, Spain)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Manuela Frisoni (ENEA Bologna, ENEA, Via Martiri di Monte Sole 4, Bologna, Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Markus Froeschle (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Antonio Froio (NEMO Group, Dipartimento Energia, Politecnico di Torino, Torino, Italy)

Co-author in P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL

Markus Froschle (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Markus Froschle (Max-Planck-Institut für Plasmaphysik (IPP), Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P4.007 Final design and prototyping of the SPIDER caesium ovens

Paolo Frosi (Fusion, Enea, Frascati, Italy)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Paolo Frosi (Unità Tecnica Fusione, ENEA-Frascati, Frascati, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Otakar Frybort (Technical calculations department, Centrum vyzkumu Rez, Hlavni 130, 250 68, Rez, Czech Republic)

Co-author in P1.169 The current status and challenges of the PbLi cold trap development undertaken at CVR

Otakar Frybort (Research Centre Rez, Hlavní 130, 250 68, Husinec-Řež, Czech Republic)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

Team FTU (FSN, ENEA C.R. Frascati, Via E. Fermi 45, Frascati-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Haiying Fu (Fusion System, National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Peng Fu (Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031, P.O. Box 1126, Hefei, Anhui Province, 230031, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

H. Fuenfgelder (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

David Fugate (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Hidetoshi Fuji (Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 5670047, Japan)

Co-author in P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy

Yuta Fujii (Department of Materials Science, Shimane University, 1060 Nishi-Kawatsu, Matsue, Shimane, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Hidetoshi Fujii (Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Akihide Fujisawa (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Akihide Fujisawa (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Hiroe Fujita (Graduate School of Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Masaharu Fujiwara (Kobe Material Testing Laboratory Group, Hyogo 675-0155, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Satoshi Fukada (Advanced of Energy Engineering science, kyushu universty, 6-1 kasugakouen kasuga-shi Fukuoka, Japan)

Co-author in P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition

Satoshi Fukada (Advanced Energy Engineering Science, Kyushu University, 6-1, Kasugakoen, Kasuga-shi, Fokuoka, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Atsushi Fukuyama (Kyoto University, Kyoto, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Frank Fullenbach (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

Helmut Funfgelder (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Helmut Funfgelder (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P3.033 ICRF system efficency

Mike Fursdon (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Tomohiro Furukawa (Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P4.175 Cavitation upstream of liquid lithium target for intense fusion nuetoron source

Mariantonietta Gabriele (Walter Tosto, Via Erasmo Piaggio, 66100, Chieti, Italy, Italy)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Andrea Gabriele (Department of Energy, Politechnic University of Turin, Turin, Italy)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Pattabhi Vishnuvardhan Gade (Institute for Technical Physics, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Mario Gagliardi (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, E-08019 Barcelona, Spain)

Agrajit Gahlaut (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Elena Gaio (Consorzio RFX, Padova, Italy)

Elena Gaio (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Elena Gaio (Power System, Consorzio RFX, PADOVA, Italy)

Co-author in P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA

S. Gajjar (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Jose Galabert (Fusion for Energy, Barcelona, Spain)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Andrei Galatanu (Physics, National Institute of Materials Physics, Magurele-Bucharest, Romania)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Magdalena Galatanu (National Institute of Material Physics, Atomistilor Street 405 A, Magurele, Ilfov 77125, Romania, Romania)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Magdalena Galatanu (National Institute of Materials Physics, Magurele, Romania;Doctoral School in Physics, University of Bucharest, Atomistilor Street 405, Magurele, Ilfov , Romania)

Co-author in P2.176 “FAST brazing” technology for W multi-metal laminates

Andrei Galatanu (National Institute of Materials Physics, Magurele, Romania)

Co-author in P2.176 “FAST brazing” technology for W multi-metal laminates
Co-author in P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components

Magdalena Galatanu (National Institute of Materials Physics, Magurele, Romania;Doctoral School in Physics , University of Bucharest, Atomistilor street no. 405, Magurele, Ilfov, Romania)

Co-author in P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components

Joaquin Galdon (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Franklin Gallay (CEA, Saint Paul Lez Durance, France)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Gian Piero Gallerano (FSN - Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide

Cristian Galperti (École Fédérale Polytechnique de Lausanne (EPFL), Swiss Plasma Center (SPC), Lausanne, Switzerland)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Giulio Gambetta (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.021 Multi-design innovative cooling research & optimization (MICRO):novel proposals for high performance cooling in DEMO

Marc Gamradt (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Mingyang Gan (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Yixiang Gan (School of Civil Engineering, University of Sydney, Shepherd Street Sydney NSW 2006, Australia)

Co-author in P3.171 Discrete element modelling of ellipsoidal particles for fusion applications

Franco Gandini (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Franco Gandini (ITER Organization, St Paul Lez Durance, France)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Constantin Paul Ganea (National Institute of Materials Physics , Atomistilor Str. 105 bis, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Ranjana Gangradey (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Ranjana Gangradey (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Gerd Gantenbein (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Gerd Gantenbein (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Gerd Gantenbein (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Zhe Gao (Department of Engineering Physics, Tsinghua University, Beijing, China)

Co-author in P4.097 Development of a quasi-steady state high voltage power supply based on Marx generator

Zhanpeng Gao (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Zhanpeng Gao (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Xiang Gao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Elena Gapionok (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Saul Garavaglia (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Saul Garavaglia (Institute of Plasma Physics “P.Caldirola", National Research Council of Italy, Milan, Italy)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Francisco Garcia (Center for Nano Science and Technology, Istituto Italiano di Tecnologia, Via G. Pascoli 70/3, Milano, Italy)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Raquel Garcia (Power Engineering Department, Uned, Juan del Rosal, 12 28040 Madrid, Spain)

Co-author in P1.200 Radiological impact mitigation of waste coming from the European Fusion Reactor DCLL DEMO

Mauricio Garcia (Power Engineering Department, Uned, Juan del Rosal, 12 28040 Madrid, Spain)

Co-author in P1.200 Radiological impact mitigation of waste coming from the European Fusion Reactor DCLL DEMO

Alvaro Garcia (ASTURFEITO, S.A, Avda. de la Siderurgia 17, 33417 Avilés – Asturias, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Raquel Garcia (Departamento de Ingenieria Energetica, UNED, 28040 Madrid, Spain)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

Mauricio Garcia (Departamento de Ingenieria Energetica, UNED, 28040 Madrid, Spain)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

Alvaro Garcia-Carrasco (Fusion Plasma Physics, Royal Institute of Technology (KTH), Stockholm, Sweden)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

A. Garcia-Carrasco (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Department of Fusion Plasma Physics, Royal Institute of Technology (KTH), 100 44 Stockholm, Sweden)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Isabel Garcia-Cortes (National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain;National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain)

Co-author in P3.172 Displacement damage effect on the thermal stability of deuterium in SiC

Javier Garcia-Lopez (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Manuel Garcia-Munoz (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Carmen Garcia-Rosales (Materials Department, CEIT-IK4, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain;Tecnun, University of Navarra, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Carmen Garcia-Rosales (Departament of Materials, CEIT-IK4, Paseo Manuel Ladrizábal 15, E-20018 San Sebastián, Spain;Tecnun, University of Navarra, Paseo de Manuel Lardizábal 13, E-20018 San Sebastian, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Carmen Garcia-Rosales (Materials and Manufacturing, Ceit-IK4, San Sebastian, Spain)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Laura Garcia-Ruesgas (Department of Engineering Graphics, University of Seville, Sevilla, Spain)

Belit Garcinuno (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

White Gareth (AMEC Foster Wheeler, Cheshire, United Kingdom)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Atul Garg (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Silvia Garitta (Dipartimento di Energia, Ingegneria dell'Informazione e Modelli Matematici, University of Palermo, Palermo, Italy)

Luca Garzotti (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Luca Garzotti (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Luca Garzotti (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in O5A.2 Fusion Reactor Start-up without an External Tritium Source

Jonathan Gaspar (IUSTI UMR 7343, CNRS, Aix-Marseille University - 5 rue Enrico Fermi, F-13453 Marseille, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Yuri Gasparyan (Plasma Physics Department, National Research Nuclear University MEPhI, Moscow, Kashirskoe highway, 31, Russian Federation)

Co-author in P4.117 Low temperature deuterium release from lithium films

Thibault Gassmann (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

David A. Gates (Princeton Plasma Physics Laboratory, 100 Stellarator Road Princeton, NJ 08540, United States)

Co-author in P3.042 Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade

Renato Gatto (Department of Astronautical, Electrical and Energy Engineering, Sapienza University, Rome, Italy)

Co-author in P1.091 The tilted toroidal field coil concept for advanced tokamaks

Anthony Gattuso (General Atomics, P.O. Box 85608, San Diego, CA 92186-5608, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Pasqualino Gaudio (Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

Pasqualino Gaudio (Industrial Engineering, University of Rome Tor Vergata, Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Pasqualino Gaudio (Associazione EUROFUSION-ENEA, Department of Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Pasquale Gaudio (Industrial Engineering, Associazione EUROFUSION-ENEA, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Eric Gauthier (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Eric Gauthier (CEA/DSM/IRFM, CEA Cadarache, Saint-Paul-les-Durance, France)

Co-author in P2.059 Fast infrared thermography on the COMPASS tokamak

Eric Gauthier (IRFM, CEA, Saint-Paul-Lez-Durance, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Eric Gauthier (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Pierre Gavila (Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in O4B.4 HELCZA – High Heat Flux Test Facility for Testing ITER EU First Wall Components

Maribel C Gazquez (Fusion National Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Stephane Gazzotti (CEA IRFM, Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Zhihao Ge (School of Nuclear Science and Technology, USTC, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Steve Gee (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Joachim Geiger (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Michela Gelfusa (Industrial Engineering, University of Rome Tor Vergata, Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Shaofei Geng (Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Laurent Genini (CEA, GIF SUR YVETTE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Laurent Genini (IRFU, CEA, Gif-sur-Yvette, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Laurent Genini (IRFU/SACM, CEA, Centre de Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Siju George (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Sergei Gerasimov (CCFE, Culham Science Centre, OX14 3DB, Abingdon, United Kingdom)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Stefan P. Gerhardt (Princeton Plasma Physics Laboratory, 100 Stellarator Road Princeton, NJ 08540, United States)

Co-author in P3.042 Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade

Alexander Gervash (D.V. Efremov Scientific Research Institute of Electrophysical Apparatus, 196641 St. Petersburg, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

M. Gethins (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Z. Ghani (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, UK, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Samir Gharafi (IRFM, CEA, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Mihaela Gherendi (Plasma Phisics and Nuclear Fusion, National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

Bradut-Eugen Ghidersa (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Bradut-Eugen Ghidersa (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.118 Characterization of the cooling channels of First Wall Mock-up dedicated to the HCPB-TBM qualification

Joydeep Ghosh (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Debashis Ghosh (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Luca Giacomelli (Istituto di Fisica del Plasma “P. Caldirola”, Consiglio Nazionaledelle Ricerche, Milano, Italy)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Luca Giacomelli (Istituto di Fisica del Plasma CNR, Milano, Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Thibaud Giacomin (TED, Diagnostic Division, ITER Organization, Caradache, France)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Thibaud Giacomin (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Thibaud Giacomin (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Thibaud Giacomin (TED, Diagnostic Division, ITER Organization, Cadarache, France)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Thibaud Giacomin (Port Plugs & Diagnostics Integration Division, ITER, St Paul Lez Durance, France)

Co-author in P1.134 ESPN regulation applied to the Port Plug Structure for ITER Diagnostic system

Rosario Giammusso (ENEA C.R. Brasimone, 40032 Camugnano (BO), Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Rosario Giammusso (ENEA CR Brasimone, Località Brasimone 40032, Camugnano (BO), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Fabio Giannetti (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186, Roma, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Fabio Giannetti (Department of Astronautical, Electrical and Energy Engineering, Sapienza University of Rome, I-00185 Rome, Italy)

Co-author in P2.196 Analysis of the secondary circuit of the DEMO fusion power plant using GateCycle

Fabio Giannetti (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II, 244, 00186, Roma, Italy)

Co-author in P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold

Louis Giannone (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

Louis Giannone (Max Planck Institut für Plasmaphysik, Garching. Boltzmannstr. 2, Germany)

Co-author in P1.057 Real-time calibration parameter compensation of metal resistive bolometers operating in a thermal varying environment

Iordanis K. Giannopoulos (Automation, Technonogical Education Institute of Piraeus, Piraeus, Greece)

Co-author in P1.030 Physics-based modelling of the ECRH system for MHD control applications

Stefan Gicquel (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Stefan Gicquel (Tokamak Engineering Department, ITER, St Paul-lez-Durance, France)

Co-author in P4.126 Blanket manifold final design and validation

T. Giegerich (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Thomas Giegerich (Institute for Technical Physics, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.164 Mercury ring pump proof-of-principle testing in the THESEUS facility

Hanns Gietl (Max-Planck-Institut für Plasmaphysik (IPP), Boltzmannstrasse 2, 85748 Garching, Germany;Technische Universität München, Boltzmannstrasse 15, 85748 Garching, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

Hanns Gietl (Max-Planck-Institut für Plasmaphysik, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Kwon Giil (Control team, National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory

Emma Gil (Materials and Manufacturing, Ceit-IK4, San Sebastian, Spain)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Christophe Gil (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

M. Gilbert (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Mark Gilbert (CCFE, Abingdon, United Kingdom)

Co-author in P3.157 Neutron activation of impurity seeding gases within a DEMO environment

M. R Gilbert (Nuclear Technology Department, UKAEA, Abingdon, United Kingdom)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

R. Giniatulin (Efremov Research Institute, S.-Peterburg, Russian Federation)

Co-author in P2.173 Progress in development and qualification of beryllium for ITER blanket first wall in Russia

Rodion Ginniyatulin (“Efremov Institute”, St. Petersburg, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Silvio Giors (Plant Engineering Department, Vacuum Section, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067- St. Paul Lez Durance Cedex, France)

Co-author in P4.162 Dynamic model of ITER cryo-pumps cryogenic distribution system: torus pumping and regeneration scenarios

Dell'Orco Giovanni (Cooling Water Section, ITER Organization, Route de Vinon sur Verdon, 13115 St Paul Lez Durance, France)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Andrea Giovinazzi (DICI, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy)

Co-author in P2.148 CFD analysis of WCLL breeding blanket module design

Andrea Giovinazzi (DICI, University of Pisa, Largo Lucio Lazzarino 2, 56122, Pisa, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives
Co-author in P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold

C. Giroud (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Gerardo Giruzzi (CEA, IRFM, 13108 Saint-Paul-lez-Durance, France)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Gerardo Giruzzi (CEA-IRFM, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.007 The DTT device: systems for heating

Philippe Gitton (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Dominic Giuliano (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Gorini Giuseppe (Physics, University of Milano-Bicocca, Milano, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Curt Gliss (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Curt Gliss (ITER Technology & Diagnostics, Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras

Vyacheslav Gnyrya (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Gumansinh Gohil (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Igor Goldstein (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

V. Goloborod'ko (University of Innsbruck, Fusion@Österreichische Akademie der Wissenschaften, Innsbruck, Austria)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

V. Goloborodko (University of Innsbruck, Innsbruck, Austria)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

V. Golonorod’ko (University of Innsbruck, Kegelgasse 27/13, Wien, Austria)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Gerard Escudero Gomez (Fusion For Energy, c/o Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Alvaro Gomez (Asturfeito, Avenida de la Siderurgia, 33417 Avilés, Asturias , Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Bruno S. Goncalves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Bruno Goncalves (IPFN, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.2 RAMI analysis of the ITER LFS CTS system

Bruno Goncalves (Instituto Superior Técnio, Instituto de Plasmas e Fusão Nuclear, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Bruno Goncalves (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Bruno Goncalves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

Bruno Goncalves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics
Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities
Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Bruno Goncalves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

B. Goncalves (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Pavel Goncharov (Peter the Great Saint Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P4.022 Numerical and semianalytical treatments of neutral beam current drive in DEMO-FNS

Rene Gonde (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

S.B. Gong (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China;Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Marc Goniche (CEA, IRFM, F-13108 St-Paul-Lez-Durance, France)

Co-author in O5B.2 Radio-frequency design of a lower hybrid slotted waveguide antenna

Marc Goniche (IRFM, CEA, Saint Paul Lez Durance Cedex, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Maria Gonzalez (Materials for Fusion Group, CIEMAT, Avda. Complutense, 40. 28040 Madrid, Spain)

Co-author in P3.149 Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design

Miguel Gonzalez (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Miguel Gonzalez (NATEC, C/ Marqués de San Esteban 52 entlo D, 33206 Gijón, Spain)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Maria Gonzalez (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Maria Gonzalez (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P1.154 Radiation effects on the chemical stability and deuterium extraction capability for ceramic breeders

Maria Gonzalez (LNF-DTF, CIEMAT, Madrid, Spain)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Jorge Gonzalez (RÜECKER LYPSA, Carretera del Prat, 65, Cornellá de Llobregat, Spain)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Miguel Gonzalez (Numerical Analysis Technologies (NATEC S.L), Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Javier Gonzalez-Martin (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Timothy Goodman (Swiss Plasma Center - EPFL, CH-1015 Lausanne, Switzerland)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Timothy Goodman (EPFL-SPC, EURATOM – Confédération Suisse, CH-1015 Lausanne, Switzerland)

Co-author in P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment

Tim Goodman (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

Timothy Goodman (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Timothy Goodman (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Timothy Goodman (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Alex Goodyear (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

G. Gorayev (FSUE Bazalt, Saratov region, Russian Federation)

Co-author in P2.173 Progress in development and qualification of beryllium for ITER blanket first wall in Russia

Alexey Gorbunov (NRC Kurchatov Institute, Moscow, 123182, 1 Akademika Kurchatova sq., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Sergej Gordeev (Institute for Neutronic Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.174 Numerical investigation of cavitation phenomena in the free surface liquid-lithium flow

Sergej Gordeev (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.172 The test cell configuration under IFMIF-DONES condition

Yuriy Gordienko (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Yuri Gordienko (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Yuri Gorelov (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

G. Gorini (Instituto di Fisica del Plasma “Piero Caldirola”, Milano, Italy)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Giuseppe Gorini (Instituto di Fisica del Plasma "Piero Caldirola«, Consiglio Nazionale delle Ricerche, and Dipartimento di Fisica “G. Occhialini”, Università degli studi di Milano Bicocca, Milano, Italy)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Ilya Gornikel (Alphysica GmbH, Karlsruhe, Germany)

Nomura Goro (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Aleksey Gorshkov (NRC "Kurchatov Institute", Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER

Aleksey Gorshkov (Kurchatov Institute, Moscow, Russian Federation)

Co-author in P4.052 Fiber optics for plasma diagnostics in ITER

Marcin Gosk (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Marcin Gosk (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Mateusz Gospodarczyk (Ing. Civile e Ing. Informatica, Università di Roma, Tor Vergata 0133 Roma, Italy, Università di Roma, Tor Vergata, Tor Vergata-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Alexander Gostev (SRC RF TRINITI, Moscow (Troitsk), Russian Federation)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation

N. Goswami (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Krishan Kumar Gotewal (Remote Handling Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

Takuya Goto (National Institute for Fusion Science, Toki, Japan)

Co-author in P2.172 Water hydraulic experiment as a simulant for the molten salt blanket with metal powders

Takuya Goto (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Takuya Goto (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Rick Goulding (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Richard Howell Goulding (Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, United States)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Richard Goulding (Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, United States)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

R. Gowland (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Joseph Graceffa (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Bill Graham (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Margaet Graham (CCFE, Culham Science Centre, Abingdon, OX13 3DB, United Kingdom)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Margaret Graham (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Michael Grahl (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Michael Grahl (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Michael Grahl (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany;Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Michael Grahl (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Michael Grahl (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Luca Grando (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P1.075 Upgraded electromagnetic measure system for RFX-mod
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade
Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Luca Grando (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade

Gustavo Granucci (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Gustavo Granucci (Institute of Plasma Physics “P. Caldirola”, CNR, Milan, Italy)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Gustavo Granucci (Institute of Plasma Physics “P.Caldirola", National Research Council of Italy, Milan, Italy)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Gustavo Granucci (Institute of Plasma Physics “P.Caldirola”, National Research Council of Italy, Milan, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Nicola Granzotto (Progetto Decibel, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Sergey Grashin (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Marco Grattarola (ANSALDO NUCLEARE, ANSALDO, Corso Perrone, 25, 16152 Genova, Italy)

Co-author in P1.197 EU DEMO safety and operating requirements. Issues and possible solutions

Filippo Gravanti (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Van Graves (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Jonathan P. Graves (EPFL, CRPP, CH-1015 Lausanne, Switzerland)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Graeme Greaves (School of Computing and Engineering, University of Huddersfield, Huddersfield, HD1 3DH, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

Henri Greuner (Plasmarand und Wand, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Henri Greuner (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Henri Greuner (Max-Planck-Institut für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Henri Greuner (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Henri Greuner (Max-Planck_Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Yuri Gribov (ITER Organization, St. Paul-Lez-Durance, Cadarache, France)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Yuri Gribov (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Andrew Grief (Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford, WA16 8QZ, United Kingdom)

Eduard Grigore (3National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Sergey Grigoriev (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Sergey Grigoriev (JSC "NIIEFA", Saint-Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Sverker Griph (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Larry R Grisham (Princeton Plasma Physics Laboratory, NJ 08543, United States)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Friedrich Groeschel (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.174 Numerical investigation of cavitation phenomena in the free surface liquid-lithium flow

Frank Groner (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Gilles Gros (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Friedrich Groschel (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.172 The test cell configuration under IFMIF-DONES condition

Friedrich Groschel (Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES

Klaus Grosser (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Giovanni Grossetti (Institute for Applied Materials - Applied Materials Physics (IAM-AWP), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Giovanni Grossetti (IAM-AWP, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Giovanni Grossetti (Institute for Applied Materials , Karlsruhe Institute of Technology , Eggenstein-Leopoldshafen, Germany)

Co-author in P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria

Olaf Grulke (Teilinstitut Greifswald, Max-Planck-Institut für Plasmaphysik, Wendelsteinstr. 1 17491 Greifswald, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Olaf Grulke (Teilinstitut Greifswald, Max Planck Institut für Plasmaphysik, 17491 Greifswald, Germany)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Martin Grun (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Martin Grun (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Martin Grun (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Mikhail Gryaznevich (Tokamak Energy Ltd, Culham Science Centre, Abingdon, OX143DB, United Kingdom)

Co-author in P3.013 Overview and status of construction of ST40

Mikhail Gryaznevich (Tokamak Energy Ltd, Culham Science Centre, Abingdon, United Kingdom;Technical University of Denmark, Anker Engelunds Vej 1 Bygning 101A, 2800 Kgs. Lyngby, Denmark)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Mikhail P. Gryaznevich (Tokamak Energy Ltd, Milton Park, United Kingdom)

Co-author in P1.047 Equilibrium modelling of merging compression startup in a spherical tokamak

Justyna Grzonka (Department of Materials Science, Warsaw University of Technology, Warsaw, Poland;Institute of Electronic Materials Technology, Warsaw, Poland)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Wenhai Guan (Department of Quantum Science and Energy Engineering, Tohoku University, Sendai 980-8579, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Wenhai Guan (Tohoku University, Aoba-ku, Sendai, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Filippo Guarda (NIDEC-ASI, Milan, Italy)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Jose Guasp (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

D. Guilhem (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Christophe Guillemaut (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

C. Guillemaut (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade, Lisboa, Portugal)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Christophe Guillon (IRFM, CEA, Saint-Paul-Lez-Durance, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Christophe Guillon (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Luis Guimarais (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Luis Guimarais (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, P-1049-001 Lisboa, Portugal)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Andrea Guion (COELME Costruzioni Elettromeccaniche S.p.A., via G. Galilei n° 1/2, 30036 S. Maria di Sala (Venezia), Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Zou Guiqing (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

Julio Guirao (Numerical Analysis Technologies (NATEC S.L), Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Julio Guirao (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Julio Guirao (NATEC, C/ Marqués de San Esteban 52 entlo D, 33206 Gijón, Spain)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Julio Guirao (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Hitesh Kumar Gulati (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Jamie P. Gunn (CEA, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Yong Guo (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

H.Y. Guo (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Yun Guo (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P2.155 Experimental study on the subcooled boiling in square channel

Chet Narayan Gupta (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

D. K. Gupta (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Laxminarayan Gupta (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

V. Gupta (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Neelam Gupta (RACE, UKAEA, Culham Science Centre, Oxfordshire, United Kingdom)

Co-author in O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies

Dinesh Gupta (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Dinesh Gupta (Cooling water system group, ITER-India (Institute for Plasam Research), Gandhinagar, India)

Co-author in P1.007 Mechanical design solution for cold water basin of ITER Heat rejection system

Daniel Gutierrez (Fusion for Energy, Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Daniel Gutierrez (Fusion For Energy, Barcelona, Spain)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Daniel Gutierrez (Fusion For Energy, c/o Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Sven Gutruf (Kampf Telescope Optics, Munich, Germany)

Hyoseong Gwon (Department of Blanket System Research, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.164 Passive decay heat removal for solid breeder blanket

Tomaz Gyergyek (Faculty of Electrical Engineering, University of Ljubljana, Tržaška c. 25, 1000 Ljubljana, Slovenia)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Min-Su Ha (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.125 Investigation on feasibility of cleanliness assessment using test sample for ITER blanket shield block

Min-Su Ha (Tokamak Technology, National Fusion Research Institute(NFRI), Daejeon, South Korea)

Co-author in P1.002 Design and Structural Analysis of the Upending Tool

Min-Su Ha (Tokamak Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

Minsu Ha (Blanket Technology Team, National Fusion Research Institude, DAEJON, South Korea)

Co-author in P2.143 Investigation and Optimization of Molybdenum Disulfide Parameters for Low Friction Coating

Guenter Haas (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Pavel Hacek (Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 3, 121 16, Prague 2, Czech Republic;Tokamak Department, Institute of Plasma Physics of the Czech Academy of Sciences, Za Slovankou 1782/3, 182 00, Prague 8, Czech Republic)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Hynek Hadraba (Institute of Physics of Materials, The Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications

Hynek Hadraba (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Sanghee Hahn (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.040 Optimization of ITER poloidal field coil currents at initial magnetization phase

Sang-Hee Hahn (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.046 Improvements of magnetic measurements for plasma control in KSTAR tokamak

Wang HaiBing (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Jiang Haiyan (School of Materials Science and Engineering, Hefei University of Technology, Hefei city, Anhui Province, P.R.China 230009, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

Leszek Hajduk (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Petr Hajek (ÚJV Rez a.s., Hlavni 130, 250 68, Rez, Czech Republic)

Co-author in P1.169 The current status and challenges of the PbLi cold trap development undertaken at CVR

Nandor Hajnal (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Antti Hakola (VTT Technical Research Centre of Finland, 02044 VTT, Finland)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Anti Hakola (VTT Technical Research Centre of Finland, 02044 VTT, Finland)

Co-author in P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies

Antti Hakola (VTT Technical Research Centre of Finland, P. O. Box 1000 (Otakaari 3K), FI-02044, Finland)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Mihails Halitovs (University of Latvia, Institute of Chemical Physics, Riga, Latvia)

Co-author in P1.108 Influence of divertor material modifications on the inventory of tritium in the divertor region

Stephanie Hall (CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Anders Hallen (Royal Institute of Technology (KTH), Stockholm, Sweden)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

K. Hamada (Magnet Division, ITER Organization, Saint-Paul-lès-Durance, France)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Kohei Hamaguchi (Division of Sustainable Energy and Environmental Engneering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux

Dai Hamaguchi (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Shinji Hamaguchi (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Dai Hamaguchi (Fusion Research and Development Directorate, Japan Atomic Energy Agency, 2-166 Oaza-Obuchi-Aza-Omotedate, Rokkasho, Kamikita-gun, Aomori 0393212, Japan)

Co-author in P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy

Yukinori Hamaji (NIFS, Gifu, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Takashi Hamano (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.072 Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic

David Hamilton (Remote Handling & Radioactive Materials Division, ITER Organization, St Paul Lez Durance Cedex – France, France)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

C. Hamlyn-Harris (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Gi Young Han (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Jongwon Han (Heating and current drive team, National Fusion Research Institute(NFRI), DAEJEON, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Masaya Hanada (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

M. Hanada (Japan Atomic Energy Agency, 801-1 Mukoyama, Naka-shi, Ibaraki-ken 311-0193, Japan)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Masaya Hanada (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Kazuaki Hanada (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Kazuaki Hanada (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Heikki Handroos (Mechanical Engineering, School of Energy Systems, Lappeenranta Uinversity of Technology, Lappeenranta, Finland)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Heikki Handroos (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

Heikki Handroos (Lab of Intelligent Machines, Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Heikki Handroos (Laboratory of Intelligent Machines, Lappeenranta University of Technology, lappeenranta, Finland)

Co-author in P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators

Stefan Hanke (Institute for Technical Physics, KIT - Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

S. Hanke (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Simon Hanks (FIRCROFT, Warrington, United Kingdom)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

M. Hansink (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Lijuan Hao (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER

Lijuan Hao (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Hu HaoTian (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Yannis Hardalupas (Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom)

Co-author in P1.019 Measurement of flow velocity during natural convection in nanofluids

Pathak Haresh A (In Wall Shielding, ITER-India, Gandhinagar, India)

Co-author in P1.186 Study of Magnetic Properties of IWS Materials during Material and Component Manufacturing

J.V.S. Hari (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

J.V.S. Harikrishna (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Christopher Harrington (Culham Centre for Fusion Energy (CCFE), Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P2.195 Dynamic modelling of a water-cooled blanket and energy storage options for a pulsed DEMO

James Harrison (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Robert Harrison (School of Computing and Engineering, University of Huddersfield, Huddersfield, HD1 3DH, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

James Harrison (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Thomas Hartl (E1, Max Planck Institute for Plasmaphysics, D-85748 Garching, Germany)

Co-author in P4.122 Optimization of the ASDEX Upgrade glow discharge system

Dirk Hartmann (Institut für Plasmaphysik, Max-Planck-Gesellschaft MPG, 17491 Greifswald, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Takuya Hase (Tokai University, 4-1-1, Kitakaname, Hiratsuka-shi, Kanagawa, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Makoto Hasegawa (Nuclear Fusion Dynamics, RIAM, Kyushu University, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Makoto Hasegawa (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Akira Hasegawa (Department of Quantum Science and Energy Engineering, Tohoku University, Sendai 980-8579, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Mitsuru Hasegawa (Mitsubishi Electric Co., Kobe, Hyogo 652-8555, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Hidetoshi Hashizume (Graduate School of Engineering, Tohoku University, Sendai, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Takaki Hatae (Naka Fusion Institute, Japan Atomic Energy Agency, 801-1 Mukoyama Naka, Ibaraki 311-0193, Japan)

Co-author in P3.054 ITER Diagnostic Shutters

Takaki Hatae (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.072 Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic

Yuji Hatano (Hydrogen Isotope Research Center, University of Toyama, 3190 Gofuku,Toyama, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Jean-Claude Hatchressian (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Dag Hathiramani (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Dag Hathiramani (Max Planck Institut für Plasmaphysik, 17491 Greifswald, Germany)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Volker Hauer (Institute for Technical Physics, KIT - Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Tony Haupt (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Andre Haußler (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P4.203 Neutronics analysis of a stellarator power reactor based on the HELIAS concept

Josef Havlicek (Institute of Plasma Physics at the Czech Academy of Science, Tokamak Department, Za Slovankou 1782/3, 182 00 Prague 8, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Josef Havlicek (Tokamak, Institute of Plasma Physics, Czech Academy of Sciences, Prague 8, Czech Republic)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Josef Havlicek (Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Prague, Czech Republic)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Josef Havlicek (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Vladimir Havranek (Nuclear Physics Institute, Řež, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Ales Havranek (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic;Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 2, 166 27 Prague 6, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Nobuhiko Hayashi (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Kazuo Hayashi (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Takumi Hayashi (Department of Blanket Systems Research, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.168 Improvement of quantitative analysis method of tritium using hydrophobic catalyst

Takumi Hayashi (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Qingyun He (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P2.165 Numerical study of laminar buoyant MHD flows under non-uniform magnetic field

Tao He (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Peng He (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Liu He (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

Cock Heemskerk (Heemskerk Innovative Technology, Merelhof 2, 2172 HZ, Sassenheim, Netherlands)

Co-author in P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment

Peter J.L. Heesterman (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Roland Heidinger (Fusion for Energy, Garching, Germany)

Co-author in P3.006 Feasibility of IFMIF-DONES for other science projects

R. Heidinger (Fusion for Energy, BFD Department, Garching, Germany)

Co-author in I3.2 The IFMIF-DONES Fusion Neutron Source

J.A.C. Heijmans (Netherlands Organisation for Applied Scientific Research (TNO), Stieltjesweg 1, 2600 AD Delft, Netherlands)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Samuli Heikkinen (Fusion For Energy (F4E), Barcelona, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Bernd Heinemann (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Bernd Heinemann (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Reinhard Heller (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Carl Hellesen (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Walid Helou (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Walid Helou (CEA, IRFM, F-13108 St-Paul-Lez-Durance, France)

Co-author in O5B.2 Radio-frequency design of a lower hybrid slotted waveguide antenna

Walid Helou (IRFM, CEA, F-13108 St-Paul-Lez-Durance, France)

Walid Helou (IRFM, CEA, Saint Paul Lez Durance Cedex, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Charles Henager (Pacific Northwest National Laboratory, Richland, WA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Mark Henderson (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Mark Henderson (ITER Organization, Route de Vinon-sur-Verdon 13067 St. Paul-lez-Durance, France)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Mark Henderson (ITER Organization, CS 90 046, F-13067 St Paul lez Durance Cedex, France)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Mark Henderson (ITER Organization, St Paul Lez Durance, France)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Christine Hennig (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Christine Hennig (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Christine Hennig (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Elsa Henriques (LAETA, IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.2 RAMI analysis of the ITER LFS CTS system

Rafael Henriques (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001, Lisbon, Portugal)

Co-author in P4.065 90 degrees cylindrical energy analyzer for the plasma potential fluctuations measurements on the tokamak ISTTOK

Sung Ryul Heo (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Nam Il Her (ITER Organization, Saint-Paul-lez-Durance, France)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Raquel Heredero (INTA, Ctra de Ajalvir km 4, 28850 Torrejón de Ardoz, Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Virgile Hermann (Thales Electron Devices, 2 rue Marcel Dassault, Vélizy-Villacoublay, France)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Gabriel Hermosilla (Escuela de Ingenieria Electrica, Pontificia Universidad Catolica de Valparaiso, Valparaiso, Chile)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Francisco Hernandez (Institute for Neutron Physics and Reactor Technology, KIT, Karlsruhe, Germany)

Co-author in O1A.1 Tritium modeling in HCPB breeder blanket at a system level: a preliminary parametrical approach

Teresa Hernandez (Materials for Fusion Group, CIEMAT, Avda. Complutense, 40. 28040 Madrid, Spain)

Co-author in P3.149 Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design

Teresa Hernandez (National Fusion Laboratory, CIEMAT, Avenida Complutense 40, E-28040 Madrid, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Teresa Hernandez (Fusion National Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Francisco Hernandez (Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.153 Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO

Caroline Hernandez (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Francisco A. Hernandez Gonzalez (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Albrecht Herrmann (Max-Planck-Institut fuer Plasmaphysik, 85748 Garching, Germany)

Co-author in P4.083 Standardization of the hard- and software used to operate manipulators at ASDEX Upgrade

Albrecht Herrmann (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

Albrecht Herrmann (Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Albrecht Herrmann (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Albrecht Herrmann (Experimentelle Plasmaphysik 1, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Simon Heuer (Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Julia M. Heuser (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment

Carlos Hidalgo (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Haruhiro Higaki (Taiyo Nippon Sanso Corporation, 6-2 kojima, Kawasaki, Kanagawa, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Kei Higashi (Mitsubishi Heavy Industry, Hyogo, Japan)

Co-author in P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method

Aki Higashijima (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Aki Higashijima (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Julien Hillairet (CEA, IRFM, F-13108 St-Paul-Lez-Durance, France)

Co-author in O5B.2 Radio-frequency design of a lower hybrid slotted waveguide antenna

Julien Hillairet (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Julien Hillairet (CEA, IRFM, F-13108, Saint-Paul-lez-Durance, France)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Julien Hillairet (IRFM, CEA, Saint Paul Lez Durance Cedex, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Julien Hillairet (Engineering, In-vessel components and Projects Department, CEA, French Alternative Energies and Atomic Energy Commission, 13108, Saint Paul lez Durance, France)

Co-author in P1.027 Electron Emission Under Uniform Magnetic Field of Materials For Fusion And Spatial Applications

Jonathan A. Hinks (School of Computing and Engineering, University of Huddersfield, Huddersfield, HD1 3DH, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

Tatsuya Hinoki (Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Tatsuya Hinoki (Institute of Advanced Energy, Kyoto University, Kyoto, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Takeshi Hirai (ITER Organization, Route de Vinon sur Verdon, F-13067 Saint Paul lez Durance, France)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Yasushi Hirakawa (Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P4.175 Cavitation upstream of liquid lithium target for intense fusion nuetoron source

Junichi Hiratsuka (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Fujita Hiroe (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Akira Hirose (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Takanori Hirose (Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan;Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.175 Assessment of F82H development status toward DEMO with respect to the existing design code

Akira Hirose (University of Saskatchewan, 116 Science Place, Saskatoon, SK S7N 5E2, Canada)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Kasahara Hiroshi (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Chiaki Hisaka (Kobe Material Testing Laboratory Group, Hyogo 675-0155, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Yoshimitsu Hishinuma (National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Yoshimitsu Hishinuma (National Institute for Fusion Science, Toki City, Japan)

Co-author in P2.184 Development of Oxide dispersion strengthened-Copper using MA-HIP process

Yoshimitsu Hishinuma (National Institute for Fusion Science, 322-6, Oroshi-cho, Toki, Japan)

Co-author in P1.081 Development of the bronze processed Nb3Sn multifilamentary wires using Cu-Sn-Zn ternary alloy matrix

Ryoji Hiwatari (Sector of fusion research and development, Japan Atomic Energy Agency, Kamikita-gun, Aomori, Japan)

Co-author in P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor

Ryoji Hiwatari (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Ryoji Hiwatari (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Anders Hjalmarsson (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Team HL-2A (Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Tuong Hoang (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Eiji Hoashi (Osaka University, Osaka, Japan)

Eiji Hoashi (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Eiji Hoashi (Osaka University, 2-1 Yamadaoka, Suita-City, Osaka, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Eiji Hoashi (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.178 Study on suppression of surface fluctuation of liquid Li jet by magnetic field

Eiji Hoashi (Division of Sustainable Energy and Environmental Engneering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux

Eji Hoashi (Department of Sustainable Energy and Environmental Engineering, School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

Eric Richard Hodgson (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P1.154 Radiation effects on the chemical stability and deuterium extraction capability for ceramic breeders

Eric R. Hodgson (LNF-DTF, CIEMAT, Madrid, Spain)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Eric Hodgson (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.175 Radiation induced deuterium absorption dependence on temperature, dose rate, and gas pressure for SiC

Eric R. Hodgson (National Fusion Laboratory, CIEMAT, Avda. Complutesnse 40, Spain)

Co-author in P3.146 H isotope thermo-diffusion in structural materials

Eric Richard Hodgson (National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain;National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain)

Co-author in P3.172 Displacement damage effect on the thermal stability of deuterium in SiC

Jan Hoffmann (Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Jean-Philippe Hogge (SPC, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Jean-Philippe Hogge (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Christopher Holcomb (Lawerence Livermore National Laboratory, Livermore, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

Klaus-Peter Hollfeld (Forschungszentrum Jülich GmbH, ZEA-1, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Klaus-Peter Hollfeld (Central Institute for Engineering, Electronics and Analytics/Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Klaus Peter Hollfeld (ZEA-1, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

A. Hollingsworth (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Jonathan Hollocombe (Theory and Modelling, CCFE, Abingdon, United Kingdom)

Co-author in P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE

Jonathan Hollocombe (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Jonathan Hollocombe (UKAEA-CCFE, Abingdon, United Kingdom)

Co-author in P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling

A. J. T. Holmes (Marcham Scientific Ltd., Sarum House,10 Salisbury Rd., Hungerford, Berkshire, RG17 0LH, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Andreas Holtz (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Andreas Holtz (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Andreas Holtz (Design Engineering, Max-Planck-Institut für Plasmaphysik, Wendelsteinstr. 1, 17491 Greifswald, Germany)

Co-author in P1.012 A software eco-system for the integrated design of W7-X

Andreas Holtz (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Yuki Homma (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Yuki Homma (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Alexander Hon (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Suk-ho Hong (KSTAR research center, NFRI, Daejeon, South Korea)

Co-author in P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR

Jaesic Hong (KSTAR Control Research Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Bong Guen Hong (Chonbuk National University, Jeonju, South Korea)

Co-author in P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component

Suk-Ho Hong (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Jaesic Hong (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Bong Guen Hong (Chonbuk National University, Jeonju-si, South Korea)

Co-author in P3.106 Ablation properties of plasma facing materials using thermal plasmas

Kwen-Hee Hong (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Toshihiko Honzu (College of Engineering, Ibaraki University, Hitachi, Ibaraki, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Christian Hopf (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Christian Hopf (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.037 Helium neutral beam injection into ASDEX Upgrade

Dave Hopper (AMEC Foster Wheeler, Cheshire, United Kingdom)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Jan Horacek (Tokamak, Institute of Plasma Physics, Czech Academy of Sciences, Prague 8, Czech Republic)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Hiroyuki Horii (Mitsubishi Electric Co., Kobe, Hyogo 652-8555, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Hiroshi Horiike (Fukui University of Technology, 3-6-1 Gakuen, Fukui-City, Fukui, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Hiroshi Horiike (Department of Applied Nuclear Technology, Faculty of Engineering, Fukui University of Technology, Fukui, Japan)

Hiroshi Horiike (Department of Applied Nuclear Technology, Fukui University of Technology, Fukui, Japan)

Co-author in P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method

Hiroshi Horiike (Department of Applied Nuclear Technology, Faculty of Engineering Fukui University of Technology, Fukui, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Seira Horikoshi (Graduate School of Integrated Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Seira Horikoshi (Graduate School of Integrated Science and Technology, Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings

Seira Horikoshi (Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles

Gregoire Hornung (Applied Physics Department, Ghent University, B-9000 Gent, Belgium)

Co-author in P3.050 Physical characterization of the JET operational space regarding EMLs by means of discriminant analysis

Y. Horstensmeyer (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Kazuki Hosaka (Applied Electronics, Tokyo University of Science, Katsushika-ku, Tokyo, Japan)

Co-author in P1.156 DNS of Turbulent Heat Transfer in pipe flow via MPI+OpenMP for multi-CPU

Till Hoschen (Plasmarand und Wand, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Till Hoschen (Max-Planck-Institut für Plasmaphysik (IPP), Boltzmannstrasse 2, 85748 Garching, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

Joel Hosea (Plasma Physics Laboratory, Princeton University, Princeton, New Jersey, United States)

Co-author in P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand

Kazuo Hoshino (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Tsuyoshi Hoshino (Breeding Functional Materials Development Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in O1A.2 Progress of R&D on advanced tritium breeders for BA activity in EU and Japan

Tsuyoshi Hoshino (Breeding Functional Materials Development Group, Japan Atomic Energy Agency, Rokkasho-mura, kamikita-gun, Aomori, Japan)

Co-author in P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition

Kazuo Hoshino (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Kazuo Hoshino (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Tsuyoshi Hosino (Fusion Research and Development Directrate, Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density

Tsuyoshi Hosino (Fusion Research and Development Directrate, Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization

Simon Hotchin (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Y.M. Hou (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China;Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Anne Houben (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.180 Yttrium oxide coatings as tritium permeation barriers

Michael Houry (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Jakub Hromadka (TechSoft Engineering spol. s r.o., Na Pankráci 322/26, 140 00 Praha 4 - Nusle, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Martin Hron (Tokamak Department, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3 182 00 Prague 8, Czech Republic)

Co-author in P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak

Jiansheng Hu (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Jiansheng Hu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Liqin Hu (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Cui Hu (Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles

G.H. Hu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Cui Hu (Graduate School of Integrated Science and Technology, Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings

Li HuaJun (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Qunying Huang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Qunying Huang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel

Hua Huang (Institute of Nuclear Energy Safety Technology (INEST), Hefei, Anhui, China)

Co-author in P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field

Yawei Huang (Institute of Research into the Fundamental Laws of the Universe, CEA Saclay, Gif-sur-Yvette, France)

Co-author in P2.090 Quench tests analysis of the first JT-60SA Toroidal Field coils

Shenghong Huang (Modern mechanics, university of science and technology of China, hefei, China)

Co-author in P4.107 Numerical simulation on coupled thermal fatigue behavior of first wall in fusion reactor

Yao Huang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

Bill Huang (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Yawei Huang (CEA, GIF SUR YVETTE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Kai Huang (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shuhanhu Road, Hefei, Anhui, China)

Co-author in P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR

Mei Huang (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Wangli Huang (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Zhiyong Huang (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Xiangmei Huang (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Kai Huang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)

Co-author in P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR

Yuncong Huang (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

Kai Huang (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui 230031, China)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Valentina Huber (Forschungszentrum Jülich GmbH, Supercomputing Centre (JSC), 52425 Jülich, Germany)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

A. Huber (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung – Plasmaphysik, 52425 Jülich, Germany)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Alexander Huber (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Alexander Huber (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Alexander Huber (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Valentina Huber (Forschungszentrum Jülich GmbH, Supercomputing Centre, 52425 Jülich, Germany)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Francois-Xavier Hugot (Den-Service d’études des réacteurs et de mathématiques appliquées (SERMA), CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in O5A.3 Recent developments in the TRIPOLI-4® Monte-Carlo code for fusion applications

Sung-Ryul Huh (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Wei Huiling (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

David A. Humphreys (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

David Humphreys (General Atomics, PO Box 85608, San Diego, CA 92186-5608, United States)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Dave A. Humphreys (General Atomics, San Diego, United States)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Samuel A. Humphry-Baker (Department of Materials, Imperial College London, Prince Consort Road, London, SW7 2BP, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

Paul Humrickhouse (Idaho National Laboratory, P.O. Box 1625 Idaho Falls, ID, USA, United States)

Co-author in O4C.3 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB and HCLL TBS accident analyses

Paul Humrickhouse (Fusion Safety Program, Idaho National Laboratory, Idaho Falls, United States)

Co-author in P1.151 An equation of state for lead lithium eutectic

Roman Husak (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Roman Husak (Institute of Physics of Materials, The Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications

Y. S. Hwang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Y. S. Hwang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea;Center for Advanced Research in Fusion Reactor Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.077 Development of optical probe for local emission profile measurements in VEST

Y. Hwang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Yongseok Hwang (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Y.S. Hwang (Department of Nuclear Enigneering, Seoul National University, Seoul, South Korea;Center for Advanced Research in Fusion Reactor Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

Daniele Iadicicco (Center for Nano Science and Technology, Istituto Italiano di Tecnologia, Via G. Pascoli 70/3, Milano, Italy)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Francesco Iannone (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Kenzo Ibano (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Kenzo Ibano (Osaka University, Suita, Japan)

Co-author in P3.101 Tungsten and Iron sputtering properties over recrystallization temperature

Kenzo Ibano (Osaka University, Suita city, Japan)

Co-author in P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation

Kenzo Ibano (Division of Electrical, Electronic and Information Engineering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux

Kenzo Ibano (Osaka university, Osaka, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Kenzo Ibano (Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P3.153 Sensitivity analysis of tritium retention in tungsten walls using a fusion reactor simulation code

Angel Ibarra (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Angel Ibarra (Laboratorio Nacional de Fusion, CIEMAT, Avda. Complutense 40, CP: 28040, Madrid, Spain)

Co-author in P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES

Angel Ibarra (Laboratorio Nacional de Fusión por Confinamiento Magnético , CIEMAT, Madrid, Spain)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Angel Ibarra (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

Angel Ibarra (CIEMAT, Madrid, Spain)

Co-author in P3.006 Feasibility of IFMIF-DONES for other science projects

Angel Ibarra (Fusion National Laboratory, CIEMAT, Avda. Complutense, 40, 28040 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Angel Ibarra (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

A. Ibarra (CIEMAT, Madrid, Spain)

Co-author in I3.2 The IFMIF-DONES Fusion Neutron Source

Mathieu Ichard (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Masahiro Ichikawa (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Shunsuke Ide (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Hiroshi Idei (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Hiroshi Idei (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Andrzej Igielski (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Yuri Igitkhanov (Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Y. Igitkhanov (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Yuri Igitkhanov (ITEP, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.113 Effect of ELMs on PFC of DEMO reactor

Daniel Iglesias (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Silvia Iglesias (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Silvia Iglesias (NATEC, C/ Marqués de San Esteban 52 entlo D, 33206 Gijón, Spain)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Silvia Iglesias (Numerical Analysis Technologies (NATEC S.L), Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Prieto Diaz Ignacio (Iberdrola Ingeniería y Construcción S.A.U., 28050 Madrid, Spain)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Ryota Ihira (Institute of Advanced Energy, Kyoto University, Uji, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H

Takaaki Iijima (Tokai University, 4-1-1, Kitakaname, Hiratsuka-shi, Kanagawa, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Takaaki Iijima (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Y. Ikeda (JT-60SA Project Team, JAEA, 801-1 Mukoyama, Naka, Ibaraki 311-0193, Japan)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Ryosuka Ikeda (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Ryosuke Ikeda (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Katsunori Ikeda (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Ryosuke Ikeda (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Zeki Ilhan (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, PA, United States)

Co-author in P3.042 Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade

Tamas Ilkei (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Stefan Illy (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Stefan Illy (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Kihak Im (National Fusion Research Institute, 169-148, Yuseong-gu, Daejeon 305-806, South Korea)

Co-author in P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events

Kihak Im (DEMO Technology Division, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.120 Calculations on plasma radiation heat distribution on the first walls of the K-DEMO reactor

Kihak Im (DEMO Technology Division, NationalFusionResearchInstitute, Daejeon, South Korea)

Co-author in P2.118 Preliminary analyses for electromagnetic loads of the K-DEMO divertor system

Kihak Im (Fusion Engineering Center, DEMO Technology Division, National Fusion Research Institute (NFRI), Daejeon, South Korea)

Co-author in P2.119 R2S method based shutdown dose rate estimation on the K-DEMO equatorial port area

Kihak Im (DEMO Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Shinsaku Imagawa (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Martin Imrisek (Tokamak, Institute of Plasma Physics, Czech Academy of Sciences, Prague 8, Czech Republic)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Sang-Ryul In (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Yong-kyoon In (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Marco Incelli (ENEA, Via E. Fermi 45, 00044 Frascati, Italy;University of Tuscia, Via del Paradiso 47, 01100 Viterbo, Italy)

Co-author in P4.148 The coolant purification system in DEMO: candidate technologies, requirements and interfaces

Marco Incelli (DEIM, University of Tuscia, Via del Paradiso 47, 01100 Viterbo, Italy)

Co-author in P4.149 Processing of Plasma Enhancement Gases through ceramic membranes
Co-author in P4.150 Heavy water decontamination tests through a Pd-membrane reactor

Virginia Infante (LAETA, IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.2 RAMI analysis of the ITER LFS CTS system

L. C. Ingesson (Fusion for Energy, Barcelona, Spain)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Nikolai Injutin (GKMP group, Bryansk, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Paolo Innocente (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

Dai Inomiya (Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Ryuichi Inoue (Fusion Research and Development Directorate, ITER Project Unit, Remote Handling Technology Group, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance

Daisuke Inoue (Osaka University, Suita city, Japan)

Co-author in P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation

Daisuke Inoue (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Zisis Ioannidis (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Zisis C. Ioannidis (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Codrina Ionita (Institute for Ion Physics and Applied Physics, University of Innsbruck, Technikerstraße 25/3, 6020 Innsbruck, Austria)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Akihiko Isayama (Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Fumitaka Ishikawa (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Co-author in P4.118 Retention and transmission properties of deuterium in tungsuten by the divertor simulator TPD-Sheet IV

Humitaka Ishikawa (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Co-author in P4.112 Experimental simulation of super-X divertor for detached plasma by TPD-Sheet IV

Mitsutaka Isobar (National Institute for Fusion Science, Toki, Gifu, Japan;SOKENDAI (The Graduate University for Advanced Studies), 322-6 Oroshi-cho, Toki 509-5292, Japan, Japan)

Co-author in P3.071 Monte Carlo simulation of the neutron measurement for the Large Helical Device deuterium experiments

Kanetsugu Isobe (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Kanetsugu Isobe (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Takaaki Isono (Superconducting Magnets, Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Masami Isozaki (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Kiyoshi Itami (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.072 Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic

Michael Iten (Ampegon AG, Spinnereistrasse 5, CH-5300 Turgi, Switzerland)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Satoshi Ito (Graduate School of Engineering, Tohoku University, Sendai, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Inigo Iturriza (Materials and Manufacturing, Ceit-IK4, San Sebastian, Spain)

Inigo Iturriza (Materials Department, CEIT-IK4, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

A. Ivanov (Budker Institute of Nuclear Physics, Novosibirsk 630090, Russian Federation)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Alexander A. Ivanov (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Irena Ivanova-Stanik (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P1.114 Integrated core-SOL-divertor modelling for DEMO with tin divertor

Maksim Ivantsivsky (BINP SB RAS, Novosibirsk, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8
Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Aljaz Ivekovic (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor

Alajaz Ivekovic (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Yasunori Iwai (Department of Blanket Systems Research, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.168 Improvement of quantitative analysis method of tritium using hydrophobic catalyst

Yasunori Iwai (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Yasunori Iwai (Department of Blanket Systems Research, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.152 Effect of halogenated gas on detritiation efficiency of the detritiation system

Yuki Iwama (Department of Sustainable Energy and Environmental Engineering, School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

Akifumi Iwamoto (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Noriyuki Y. Iwata (National Institute of Technology, Kurume College, Kurume, Fukuoka, Japan)

Co-author in P1.182 Effects of mechanical alloying parameters on microstructure and impact properties of ODS ferritic steels

Slawomir Jablonski (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Slawomir Jablonski (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Jean-Charles Jaboulay (Department of Systems and Structures Modelling, CEA, Gif-sur-Yvette, France)

Co-author in P1.171 Nuclear analysis of the HCLL blanket for the European DEMO

Jean-Charles Jaboulay (DEN, DM2S , CEA Saclay, Gif-sur-Yvette, France)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Jean-Charles Jaboulay (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

J-Ch. Jaboulay (CEA-Saclay, DEN, DM2S, SERMA, 91191 Gif-sur-Yvette, France)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

S. Jachmich (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Laboratory for Plasma Physics, ERM-KMS, EURATOM-Association “Belgian State”, Brussels, Belgium)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Philippe Jacquet (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Jacquot (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Kumarpalsinh Jadeja (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

M. Jadhav (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Mahesh Jadhav (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Hong Jaesic (Control team, National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory

Govindarajan Jagannathan (ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic

Martin Jager (Institute for Technical Physics, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.164 Mercury ring pump proof-of-principle testing in the THESEUS facility

Ales Jager (Laboratory of Nanostructures and Nanomaterials, Institute of Physics, Praha, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Nikola Jaksic (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.081 Pressure gauge filament for neutral gas density measurement using alternating current as source power

Marcin Jakubowski (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Subrata Jana (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Mukti Ranjan Jana (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Jae-young Jang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.077 Development of optical probe for local emission profile measurements in VEST

Filip Janky (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink

Filip Janky (Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Prague, Czech Republic)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Laszlo Janosi (Department of Mechatronics, Szent István University, Páter K. u. 1., Gödöllő, H-2103, Hungary)

Co-author in P2.186 Diffusion welding methods at Plasma Facing Components in fusion reactor environment

Bruno Jasper (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Snehal P. Jayaswal (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

S. Jednorog (Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw, Poland)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

S. Jednorog (Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw, Poland, Poland)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

John Jelonnek (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

John Jelonnek (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

John Jelonnek (IHM, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

John Jelonnek (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany;Institute of High Frequency Techniques and Electronics (IHE), Karlsruhe Institute of Technology (KIT), Kaiserstrasse 12, D-76131 Karlsruhe, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Ian Jenkins (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Ian Jenkins (CCFE, Oxford, United Kingdom)

Co-author in P1.040 A SysML model of the tokamak subsystems involved in a DEMO pulse

Petra Jenus (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor
Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Hartmut Jenzsch (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

YoungMu Jeon (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Seung Ho Jeong (Korea Atomic Energy Research Institute (KAERI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Nam-yong Jeong (KSTAR research center, NFRI, Daejeon, South Korea)

Co-author in P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR

Jinhyun Jeong (Heating and current drive team, National Fusion Research Institute(NFRI), DAEJEON, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Yong Hwang Jeong (Nuclear Materials Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Seung Ho Jeong (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Seung-Ho Jeong (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Seong-Jo Jeong (Hyundai Heavy Industries Co. Ltd., Ulsan, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Contributors JET (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

contributors JET (Eurofusion Consortium, JET, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

contributors JET (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

contributors JET (EUROfusion Programme Management Unit, JET, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

JET contributors (See the Appendix of F Romanelli et al, Proceedings of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russian Federation)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

JET contributors (JET, EUROfusion Consortium, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET
Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

JET contributors (See the Appendix of F. Romanelli et al., Proceedings of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russian Federation)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Akhil Jha (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Akhil Jha (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Hogun Jhang (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.040 Optimization of ITER poloidal field coil currents at initial magnetization phase

Xiaoquan Ji (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

Xiang Ji (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Jiangtao Jia (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

Shenli Jia (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Shenli Jia (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Peng Jian Fei (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Jieqiong Jiang (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.199 Environmental safety assessment for fusion reactor due to gaseous tritium release

Baogang Jiang (Harbin Electric Machinery Company Limited, Harbin, Heilongjiang, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Kecheng Jiang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China;University of Science and Technology of China, Hefei, Anhui, 230027, China)

Co-author in P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR

Hualei Jiang (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Kecheng Jiang (ASIPP, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Jieqiong Jiang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

W. Jiang (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Tao Jiang (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Jieqiong Jiang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Yanzheng Jiang (Department of Engineering Physics, Tsinghua University, Beijing, China)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Jiaming Jiang (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Kecheng Jiang (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui 230031, China)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Jiaming Jiang (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

Tao Jiang (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds

Cao Jianyong (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

Wu Jiefeng (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Road, Hefei,Anhui, China)

Co-author in P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D

Richard Jilek (Technological Experimental Loops, Centrum výzkumu Řež s.r.o., Husinec-Řež, Czech Republic)

Co-author in O4B.4 HELCZA – High Heat Flux Test Facility for Testing ITER EU First Wall Components

Richard Jilek (Centrum výzkumu Řež s.r.o., Husinec-Řež, Czech Republic)

Co-author in P2.112 Commissioning phase of high heat flux test facility HELCZA

David Jimenez Rey (CIEMAT, Madrid, Spain)

Co-author in P3.008 Design, integration and manufacturing of the MEBT and DPlate support tables for IFMIF LIPAc

Hyung Gon Jin (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1

Hyoung Gon Jin (KAERI, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Hyung Gon Jin (KAERI, 111, Daedeok-daro 989, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Hyung Gon Jin (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Xue Zhou Jin (Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Jianbo Jin (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Sung-Wook Jin (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Jianbo Jin (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Cheng Jin (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P1.158 Experimental study on effective thermal conductivity of pebble beds for fusion blankets

Cheng Jin (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.159 Theoretical and Experimental Study on Effective Thermal Conductivity of Pebble Beds for Fusion Blanket

Xue Zhou Jin (Institute of Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P2.198 Preliminary safety analysis of LOCAs in one EU DEMO HCPB blanket module

Song Jing (Institute of Nuclear Energy Safety Technology, Hefei, China)

Co-author in P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model

Yang Jinhong (Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Guillaume Jiolat (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Milos Jirsa (Institute of Physics ASCR, Praha 8, Czech Republic;Institute of Plasma Physics ASCR, Praha 8, Czech Republic)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

Paweł Jodłowski (Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, Al. Mickiewicza 30 30-059 Kraków, Poland)

Co-author in P1.185 Long-lived radionuclide activity formed in ITER steel composites in 6Li-D converter neutron field

Indrek Jogi (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Robert D. Johnson (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

D. Johnson (Princeton Plasma Physics Laboratory, Princeton, New Jersey, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Jane Johnston (Culham Centre for Fusion Energy (CCFE), UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Y. Sankar Joisa (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Graham Jones (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Timothy Jones (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Luke Jones (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

G. Jones (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

A. Jong (Research and Innovation, NRG, Petten, Netherlands)

Co-author in P3.161 Post irradiation examination of High Dose irradiated Beryllium (HIDOBE-02) in the High Flux Reactor

Jae-Joon Joo (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Jae-Joon Joo (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Hemant Joshi (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.069 The WEST Plasma Facing Components Protection
Co-author in P1.070 Measurements and controls implementation for the WEST project

Jaydeepkumar Joshi (Diagnostic Neutral Beam (DNB), ITER-India (Institute for Plasma Research), Gandhinagar, India)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Xavier Joulia (Laboratoire de Génie Chimique , INPT, Toulouse, France;Laboratoire de Génie Chimique , CNRS, Toulouse, France)

Co-author in P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics

Michel Jouve (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Michel Jouve (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

JT-60SA Team (JT-60SA EU-Home Team, Fusion for Energy, Boltzmannstr. 2, Garching 85748, Germany;JT-60SA Project Team, JAEA, 801-1 Mukoyama, Naka, Ibaraki 311-0193, Japan)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Rafael Juarez (Departamento de Ingeniería Energética, Universidad de Educación a Distancia, Madrid, Spain)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Eduard Juhera (Analytical and Applied Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.165 Amperometric hydrogen sensors for molten metals

Eduard Juhera (Analytical Chemistry, Institut Quimic de Sarria, Barcelona, Spain)

Co-author in P4.192 Lithium conducting ceramics for amperometric sensors in molten metals

Tao Jun (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Hee Joon Jung (Pacific Northwest National Laboratory, Richland, WA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Laurent Jung (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.040 Optimization of ITER poloidal field coil currents at initial magnetization phase

Bongki Jung (Korea Atomic Energy Research Institute, Daejun, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Ki-Jung Jung (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Hun-Chea Jung (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.125 Investigation on feasibility of cleanliness assessment using test sample for ITER blanket shield block

Kwangjin Jung (quantum energy chemical engineering, UST(University of science&technology), 217, Gajeong-ro, Yuseong-gu, Daejeon, 34113, South Korea;nuclear fuel cycle process development, KAERI(Korea Atomic Energy Research Institute), Yuseong, Daejeon, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Bongki Jung (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Kwangjin Jung (University of Science and Technology (UST), 217 Gajeongro, Yuseong, Daejeon, South Korea;Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeokdaero, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Bong-Ki Jung (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Hunchea Jung (Blanket Technology Team, National Fusion Research Institude, DAEJON, South Korea)

Co-author in P2.143 Investigation and Optimization of Molybdenum Disulfide Parameters for Low Friction Coating

Patrick Junghanns (Max-Planck-Institut für Plasmaphysik, Garching b. München, Germany)

Co-author in P2.124 Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X

Patrick Junghanns (Max-Planck_Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Qi Junli (Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Jacek Kaczmarczyk (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Jacek Kaczmarczyk (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Jacek Kaczmarczyk (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Masaru Kaginaka (Osaka University, 2-1 Yamadaoka, Suita-City, Osaka, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Gan Kaifu (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Benedikt Kaiser (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.116 Thermal performance augmentation by detached rib-arrays for helium-gas cooled First Wall applications

Sayaka Kaji (Department of Applied Nuclear Technology, Faculty of Engineering Fukui University of Technology, Fukui, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Hideki Kajitani (ITER department, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.078 Series Production of ITER Toroidal Field Coil Double Pancakes in Japan

Satoshi Kakudate (Fusion Research and Development Directorate, ITER Project Unit, Remote Handling Technology Group, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance

Satoshi Kakudate (Department of ITER Project, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.128 Recovery from failures of ITER Blanket Remote Handling System

Satoshi Kakudate (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Parth Kalaria (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Tadas Kaliatka (Lithuanian Energy Institute (LEI), Breslaujos st. 3, LT-44403 Kaunas, Lithuania)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Vladimir Kalinin (Alphysica GmbH, Karlsruhe, Germany)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

Arne Kallenbach (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Arne Kallenbach (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Arne Kallenbach (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

Johannes Peter Kallmeyer (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Peter Kallmeyer (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Manminder Kalsey (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Y. Kamada (JT-60SA Project Team, JAEA, 801-1 Mukoyama, Naka, Ibaraki 311-0193, Japan)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

K. Kamiya (Japan Atomic Energy Agency, Mukouyama, Naka City, Ibaraki, Japan)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Marc Kamlah (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in P1.157 Effective thermal conductivity of advanced breeder pebble beds

Marc Kamlah (Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.171 Discrete element modelling of ellipsoidal particles for fusion applications

Dirk Kampf (Kampf Telescope Optics, Munich, Germany)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic
Co-author in P4.055 Load specification and vibration test of the ITER equatorial port H-alpha diagnostic dogleg mirror
Co-author in P4.056 Design & analysis process and implications on the optical performance

Kazuhiro Kanda (Laboratory of Advanced Science and Technology for Industry, University of Hyogo, 3-1-2 Koto, Kamigori-cho, Ako-gun, Hyogo, Japan)

Co-author in P1.020 Fabrication of DLC cone for fast ignition experiment

Igor Kandaurov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Osamu Kaneko (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Takuji Kanemura (Japan Atomic Energy Agency, Ibaraki, Japan)

Takuji Kanemura (Japan Atomoc Energy Agency, Ibaraki, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Takuji Kanemura (Japan Atomic Energy Agency, 4002 Narita, O-arai, Ibaraki, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Suk-Hoon Kang (Nuclear Materials Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Qinlang Kang (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Dong Kwon Kang (NFRI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Bo Ram Kang (Chonbuk National University, Jeonju-si, South Korea)

Co-author in P3.106 Ablation properties of plasma facing materials using thermal plasmas

Dong Kwon Kang (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Kyoung-O Kang (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Youngkil Kang (SFA Engineering Corp., Asan, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Kyoung-O Kang (NFRI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Hee-Seok Kang (Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeokdaero, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Hee-Suk Kang (nuclear fuel cycle process development, KAERI(Korea Atomic Energy Research Institute), Yuseong, Daejeon, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Mario Kannamuller (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Nitin Kanoongo (Non Ferrous Materials Technology Development Centre, Kachanbagh, Hyderabad, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Marina Kaparkova (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Marina Kaparkova (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

V. Kapitonov (Budker Institute of Nuclear Physics, Novosibirsk 630090, Russian Federation)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Ilya Kapranov (JSC "CADFEM CIS", 15/3-Kondratievskiy pr. #322, Saint Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Lucie Karaskova Nenadalova (Nuclear Fuel Cycle, Research Centre Rez, Husinec - Rez 130, 250 68, Czech Republic)

Co-author in P1.205 Development and identification of detritiation techniques for DEMO radioactive waste management

Aleksey Karpov (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Alexander N. Karpushov (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Alexander N. Karpushov (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Alexander Karpushov (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Uji, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H
Co-author in P1.207 Environmental impact of nuclear fusion biomass gasification plant

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Uji, Kyoto, Japan)

Co-author in P1.182 Effects of mechanical alloying parameters on microstructure and impact properties of ODS ferritic steels

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Uji,Kyoto, Japan)

Co-author in P1.149 Myth of initial loading tritium : modelling DEMO fuel system in power ascension tests

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan)

Co-author in P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Kyoto-fu, Japan)

Co-author in P2.166 Tritium and heat simultaneous non-contact recovery in vacuum

Ryuta Kasada (Institute of Advanced Energy, Kyoto University, Gokasho,Uji,Kyoto, Japan)

Co-author in P3.121 Integral experiments of neutron transport in blanket module with hydrogen ion beam

Alexander Kasatov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Claus-Peter Kasemann (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Mieko Kashiwagi (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Mieko Kashiwagi (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Walter Kasparek (IGVP, University of Stuttgart, Pfaffenwaldring 31, 70569 Stuttgart, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Walter Kasparek (Institut für Grenzflächenverfahrenstechnik und Plasmatechnologie, Universität Stuttgart, Pfaffenwaldring 31, D-70569 Stuttgart, Germany)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Grzegorz Kasprowicz (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Grzegorz Kasprowicz (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Grzegorz Kasprowicz (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Grzegorz Kasprowicz (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

S. Kasthurirengan (Centre for Cryogenic Technology, Indian Institute of Science, Bangalore, 560012, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Kazunari Katayama (Advanced of Energy Engineering science, kyushu universty, 6-1 kasugakouen kasuga-shi Fukuoka, Japan)

Co-author in P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition

Kazunari Katayama (Advanced Energy Engineering Science, Kyushu University, Fukuoka, Japan)

Co-author in P1.206 Disposal Procedure for contaminated surface of tritium handling facility in the decommissioning operation

Kazunari Katayama (Advanced Energy Engineering Science, Kyushu University, 6-1, Kasugakoen, Kasuga-shi, Fokuoka, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Taichiro Kato (Research Rokkasho Fusion Institue, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Michael Kaufman (Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, United States)

Andrey Kavin (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Yoshiya Kawabata (Applied Quantum Physics and Nuclear Engineering, Kyushu University, Fukuoka, Japan)

Co-author in P1.206 Disposal Procedure for contaminated surface of tritium handling facility in the decommissioning operation

Yoichi Kawamata (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Yoichi Kawamata (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Kazutaka Kawamura (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Kazutaka Kawamura (Tokai University, 4-1-1, Kitakaname, Hiratsuka-shi, Kanagawa, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Yoshinori Kawamura (Department of Blanket System Research, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.164 Passive decay heat removal for solid breeder blanket

Shoji Kawasaki (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Shoji Kawasaki (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Tom Keenan (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Tom Keenan (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

T. Keenan (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Jonathan Keep (RACE, UKAEA, Culham Science Centre, Oxfordshire, United Kingdom)

Co-author in O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies

Jonathan Keep (RACE, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO

Dephine Keller (IRFM, CEA, Saint Paul Lez Durance, France)

Co-author in P4.137 Operators' accessibility studies using virtual reality

A. Kellman (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

D. Kellman (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

Richard Kembelton (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Richard Kembleton (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Richard Kembleton (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Richard Kemp (CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor

Richard Kemp (Power Plant Technology Group, CCFE, Abingdon, United Kingdom)

Co-author in P2.194 Time-dependent power requirements for pulsed fusion reactors

Richard Kemp (CCFE, Abingdon, United Kingdom)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Cameron Kennedy (RACE, UKAEA, Culham, United Kingdom)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

Mohammad Shoaib Khan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ziauddin Khan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Rustam Khayrutdinov (National Research Centre «Kurchatov Institute», Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Samir Khirwadkar (Divertor & First Wall Technology Development Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.108 Design and development of high pressure high temperature water circulation system for HHFTF

Andrei Khodak (Princeton Plasma Physics Laboratory, PO Box 451, MS-38, Princeton, NJ 08543, United States)

Co-author in P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR

Andrei Khodak (Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, NJ 08543, United States)

Co-author in P2.167 Numerical Model of Dual-Coolant Lead–Lithium (DCLL) Blanket

Andrei Khodak (Diagnostics, US-ITER, 1055 Commerce Park Dr #1, Oak Ridge, TN 37830, United States)

Co-author in P3.054 ITER Diagnostic Shutters

Andrei Khodak (Princeton Plasma Physics Laboratory, Princeton, NJ, United States)

Co-author in P3.158 Breeding Blanket Nuclear Analysis and Nuclear Data Transfer For Multiphysics Analysis Using Attila

Andrei Khodak (Princeton Plasma Physics Laboratory, PO Box 451, MS-38, Princeton, NJ 08543,, United States)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Mikhail Khokhlov (D.V. Efremov Scientific Research Institute of Electrophysical Apparatus, 196641 St. Petersburg, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Sergey Khomiakov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Vladimir Khripunov (National Research Centre “Kurchatov Institute”, Moscow, Russian Federation)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation

Vladimir Khripunov (Fusion Reactor Department, National Research Centre "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.104 Secondary radiation damage and gas production in plasma facing materials under fusion neutron irradiation

Boris Khripunov (National Research Centre “Kurchatov Institute”, 1 Akademika Kurchatova pl., Moscow, 123182, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Yohan S. Khristi (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Petr Khvostenko (NRC"Kurchatov Institute", Moscow,Kurchatov Sq.,1, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Peter Khvostenko (National Research Centre «Kurchatov Institute», Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Rajamannar Swamy Kidambi (Divertor & First Wall Technology Development Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.108 Design and development of high pressure high temperature water circulation system for HHFTF

Akihiro Kikuchi (National Institute for Materials Science, 1-2-1, Sengen, Tsukuba, Japan)

Co-author in P1.081 Development of the bronze processed Nb3Sn multifilamentary wires using Cu-Sn-Zn ternary alloy matrix

Pekka Kilpelainen (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

YooSung Kim (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Yeanjin Kim (quantum energy chemical engineering, UST(University of science&technology), 217, Gajeong-ro, Yuseong-gu, Daejeon, 34113, South Korea;nuclear fuel cycle process development, KAERI(Korea Atomic Energy Research Institute), Yuseong, Daejeon, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Hyoung Chan Kim (National Fusion Research Institute (NFRI), Daejeon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

Hee-Soo Kim (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.074 Spatial Distribution of Accumulated Neutron Emission in KSTAR

Sun-Ho Kim (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Tae-Seong Kim (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Tae-Seok Kim (Hyundai Heavy Industries Co. Ltd., Ulsan, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Heung-Su Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.046 Improvements of magnetic measurements for plasma control in KSTAR tokamak

Tae-Seong Kim (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Hak-Kun Kim (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Hyun-Soo Kim (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Gwang-Ho Kim (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Geon-Woo Kim (Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744, South Korea)

Co-author in P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events

Yeanjin Kim (University of Science and Technology (UST), 217 Gajeongro, Yuseong, Daejeon, South Korea;Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeokdaero, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Young-Gi Kim (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Hong-Tack Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

YooSung Kim (Department of Nuclear Enigneering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

Jae-Hwan Kim (Department of Blanket Systems Research,, Japan Atomic Energy Agency, Rokkasho, Kamikita,, Japan)

Co-author in P1.161 Thermal analyses of beryllide pebbles in water vapor atmosphere as advanced neutron multipliers

Sa-Woong Kim (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.125 Investigation on feasibility of cleanliness assessment using test sample for ITER blanket shield block

Nam-Won Kim (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Y. H. Kim (Chungnam National University, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

Y. O. Kim (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

H. T. Kim (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

Song Hyun Kim (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Do Hyun Kim (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Jae Hyun Kim (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Suk-Kwon Kim (KAERI, 111, Daedeok-daro 989, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Jong Su Kim (Heating and Current Drive Research Team, National Fusion Research Institute(NFRI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Yaung-Soo Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Kyungmin Kim (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Tae-Seong Kim (Korea Atomic Energy Research Institute (KAERI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Hong Tack Kim (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Suk-Kwon Kim (KAERI, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Hong-Tack Kim (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Hyungdae Kim (Department of Nuclear Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, South Korea)

Co-author in P4.103 Critical heat flux of water-subcooled flow in swirl tube with rail-type twisted tape

Kyung-Min Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

H.T. Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

H.C. Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

S.K. Kim (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Dong Jun Kim (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component

Suk-Kwon Kim (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Kyungmin Kim (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Nam-Won Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

You Bean Kim (Strategy Division, National Fusion Research Institute, Deajeon, South Korea)

Co-author in P4.205 The Economic Benefits of Big Science R&D Program: With a Focus on KSTAR Program

Yaung-Soo Kim (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Kwang-Pyo Kim (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Seongcheol Kim (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Jeehyun Kim (National Fusion Research Institute (NFRI), Daejeon, South Korea)

Co-author in P2.033 Mode Converters for Low-loss Transmission-line of KSTAR LHCD system

Sang-Tae Kim (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Haejin Kim (Heating and current drive team, National Fusion Research Institute(NFRI), DAEJEON, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Hong-Tack Kim (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Taejoon Kim (Kobe Material Testing Laboratory Group, Hyogo 675-0155, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Jongsu Kim (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Yaung-Soo Kim (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

YooSung Kim (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.077 Development of optical probe for local emission profile measurements in VEST

Yaungsoo Kim (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Haejin Kim (KSTAR Research center, NATIONAL FUSION RESEARCH INSTITUTE, 169-148 GWAHAK-RO, YUSEONG-GU, DAEJEON 34133, South Korea)

Co-author in P2.031 Design of high power traveling wave antenna for KSTAR helicon wave current drive

Jeehyun Kim (Heating and current drive team, National Fusion Research Institute(NFRI), DAEJEON, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Haejin Kim (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.030 Experimental results of helicon wave coupling using traveling wave antennas in KSTAR plasmas

Sawoong Kim (Blanket Technology Team, National Fusion Research Institude, DAEJON, South Korea)

Co-author in P2.143 Investigation and Optimization of Molybdenum Disulfide Parameters for Low Friction Coating

Hyoung Chan Kim (National Fusion Research Institute, Daejeon 305-806, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Hyoung Chan Kim (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Dong Jun Kim (Nuclear Fusion Engineering Development Department, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P2.135 Components Design and Performance Analysis for the Preliminary Design of HCCR TBM-set

Yu-Gyeong Kim (National Fusion Research Institute, 169-148, Gwahak-ro, Yuseong-gu, Daejeon, South Korea)

Co-author in P2.134 Application of fracture mechanical assessment to in-wall shield ribs in ITER vacuum vessel

Akihiko Kimura (Institute of Advanced Energy, Kyoto University, Uji, Kyoto, Japan)

Co-author in P1.182 Effects of mechanical alloying parameters on microstructure and impact properties of ODS ferritic steels

B. Damian King (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in O5A.2 Fusion Reactor Start-up without an External Tritium Source

David Kinna (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

V. Kiptily (CCFE Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Vasily Kiptily (Culham Centre for Fusion Energy, Culham, United Kingdom)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Vasily Kiptily (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Vasili Kiptily (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

V. Kiptily (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Ivan Kirienko (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Ivan Kirienko (Mechanics and Control, Peter the Great St.Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Ivan Kirienko (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Igor Kirillov (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Sergey Kirillov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Sergey Kirillov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Simon Kirk (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Masashi Kisaki (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Bela Kiss (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest,Műegyetem rkp. 3, 1111 Budapest, Hungary)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Istvan Gabor Kiss (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Gabor Kiss (ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Gunta Kizane (Institute of Chemical Physics, University of Latvia, Jelgavas Str.1, LV 1004, Riga, Latvia)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Gunta Kizane (University of Latvia, Institute of Chemical Physics, Riga, Latvia)

Co-author in P1.108 Influence of divertor material modifications on the inventory of tritium in the divertor region

Gunta Kizane (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Kaname Kizu (Tokamak System Technology, Japan Atomic Energy Agency, 801-1 Muko-yama, Naka-shi, Ibaraki-ken,, Japan)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Kaname Kizu (Tokamak System Technology, Japan Atomic Energy Agency, Naka Ibaraki, Japan)

Co-author in P2.084 Design of JT-60SA cryodistribution

Kaname Kizu (QST, Naka, Naka, Ibaraki 311-0193, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Jonathan Klabacha (Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, NJ 08543, United States)

Co-author in P2.167 Numerical Model of Dual-Coolant Lead–Lithium (DCLL) Blanket

Jonathan Klabacha (Nuclear Engineering, Princeton Plasma Physics Laboratory, Princeton, NJ, United States)

Co-author in P3.158 Breeding Blanket Nuclear Analysis and Nuclear Data Transfer For Multiphysics Analysis Using Attila

Jonathan Klabacha (Diagnostics, US-ITER, 1055 Commerce Park Dr #1, Oak Ridge, TN 37830, United States)

Co-author in P3.054 ITER Diagnostic Shutters

Felix Klein (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Felix Klein (Institut für Energie- und Klimaforschung – Plasmaphysik, IEK-4, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Christine Klein (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Christine Klein (INR, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.180 Steady-state and transient thermal-hydraulic performance of the IFMIF High Flux Test Module

Christine Klein (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Veronika Klevarova (Faculty of Mathematics and Physics, Charles University, Praha, Czech Republic;Department of Materials Engineering, Institute of Plasma Physics, Praha, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Robert Klie (Department of Physics, UIC Chicago, 845 W Taylor Street, Chicago, IL 60607, United States)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Dmitry Klimenko (INR-MET, KIT, Karlsruhe, Germany)

Co-author in P3.145 Review of Hydrogen Isotopes Transport Parameter

Thomas Klinger (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Thomas Klinger (Enterprise Wendelstein 7-X, Max-Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in I1.2 First operation of Wendelstein 7-X

Thomas Klinger (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator

Alex Klix (Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Karlsruhe, Germany)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Axel Klix (Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Karlsruhe, Germany)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

Axel Klix (Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Soren Klose (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Leonid Klyuchnikov (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Stuart Knipe (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

S. Knipe (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Regina Knitter (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Regina Knitter (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, 76021, Karlsruhe, Germany)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Regina Knitter (IAM-KWT, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Build 575 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.149 Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design

Regina Knitter (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in O1A.2 Progress of R&D on advanced tritium breeders for BA activity in EU and Japan

Regina Knitter (Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe, Germany)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Regina Knitter (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Regina Knitter (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in P1.157 Effective thermal conductivity of advanced breeder pebble beds

Regina Knitter (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment

Won-ha Ko (National Fusion Research Institute (NFRI), Daejeon Yuseong-gu, South Korea)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

Sehoon Ko (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.040 Optimization of ITER poloidal field coil currents at initial magnetization phase

Thorsten Kobarg (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Thorsten Kobarg (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Noriyuki Kobayashi (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Takayauki Kobayashi (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Takayuki Kobayashi (Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Martin Kocan (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Martin Kocan (ITER Organization, Route de Vinon sur Verdon, 13115 Saint-Paul-lez-Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Martin Kocan (ITER Organization, Route de Vinon-sur-Verdon, 13076 St. Paul-lez-Durance, France)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics
Co-author in P1.051 Signal processing for the extreme environment Hall sensors

Martin Kocan (Fircroft Engineering Services Ltd, , Birchwood Boulevard, Warrington, WA3 7QH, United Kingdom)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Matej Kocen (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor
Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Freimut Koch (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Freimut Koch (Plasma Edge and Wall, Max-Planck-Institut für Plasmaphysik, Boltzmannstrasse 2, Garching, 85748, Germany)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Freimut Koch (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Michael Kochergin (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation;ITER organisation, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Florian Kochl (Association EURATOM-Ö AW/ATI, Atominstitut, TU Wien, 1020 Vienna, Austria)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Gabor Kocsis (Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Gabor Kocsis (Wigner RCP, Budapest, Hungary)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Ivan Kodeli (Jozef Stefan Institute, Jamova cesta 39, 1000, Ljubljana, Slovenia)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Christina Koehly (Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.168 Influence of modifications of HCLL blanket design on MHD pressure losses

Mayuko Koga (Graduate School of Engineering, University of Hyogo, Himeji, Japan)

Co-author in P1.020 Fabrication of DLC cone for fast ignition experiment

Sato Kohnosuke (Chubu Electric Power Co.lnc., 20-1, Kitasekiyama, Ohdaka, Aichi, Japan)

Co-author in P4.112 Experimental simulation of super-X divertor for detached plasma by TPD-Sheet IV

Michal Kohout (Institute of Physics of the CAS, Na Slovance 1992/2, 182 21 Praha 8, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

Vasili Koidan (National Research Centre “Kurchatov Institute”, 1 Akademika Kurchatova pl., Moscow, 123182, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Yoshihiko Koide (Tokamak System Technology, Japan Atomic Energy Agency, 801-1 Muko-yama, Naka-shi, Ibaraki-ken,, Japan)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Yoshihiko Koide (Tokamak System Technology, Japan Atomic Energy Agency, Naka Ibaraki, Japan)

Co-author in P2.084 Design of JT-60SA cryodistribution

Yoshihiko Koide (QST, Naka, Naka, Ibaraki 311-0193, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Norikiyo Koizumi (ITER department, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.078 Series Production of ITER Toroidal Field Coil Double Pancakes in Japan

Atsushi Kojima (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Atsushi Kojima (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

A. Kojima (Japan Atomic Energy Agency, Mukouyama, Naka City, Ibaraki, Japan)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Piotr Kolasinski (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Piotr Kolasinski (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Piotr Kolasinski (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Piotr Kolasinski (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Matthias H. H. Kolb (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment

Matthias H.H. Kolb (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Matthias Kolb (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.154 Out-of-pile tritium adsorption/release behavior of advanced EU breeder pebbles

Matthias Kolb (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, 76021, Karlsruhe, Germany)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Jukka Kolehmainen (DIARC-Technology Inc, DIARC Finland, Finland)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Michal Koleska (Research Centre Rez, Husinec-Řež, Czech Republic)

Co-author in P4.072 Validation of 23Na(n,2n) cross section as neutron flux monitor in D-T fusion reactors

Vladimir Kolganov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Vladimir Kolganov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Jurgen Koll (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Juergen Koll (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Vyacheslav V. Kolmogorov (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak
Co-author in P3.030 Neutral beam heating on the TCV tokamak

V. Kolmogorov (Budker Institute of Nuclear Physics, Novosibirsk 630090, Russian Federation)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Masafumi Komai (Department of ITER Project, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.128 Recovery from failures of ITER Blanket Remote Handling System

Shin-ichi Komazaki (Division of Mechanical Engineering, Graduate School of Science and Engineering, Kagoshima University, Kagoshima, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Michael Komm (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Kirill Komov (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Bostjan Koncar (Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia)

Co-author in P2.140 Thermal radiation analysis of DEMO tokamak

Masatoshi Kondo (Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, Tokyo, Japan)

Co-author in P4.189 Monitoring of oxide layer structures in Pb and Pb-Li alloy by electrochemical impedance spectroscopy

Akiko Kondo (Department of Blanket Systems Research, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.152 Effect of halogenated gas on detritiation efficiency of the detritiation system

Sosuke Kondo (Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Hiroo Kondo (Japan Atomic Energy Agency, Ibaraki, Japan)

Hiroo Kondo (Japan Atomic Energy Agency, 4002 Narita, O-arai, Ibaraki, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Hiroo Kondo (Japan Atomoc Energy Agency, Ibaraki, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Sosuke Kondo (Institute of Advanced Energy, Kyoto University, Kyoto, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Jongdae Kong (KSTAR research center, NFRI, Daejeon, South Korea)

Co-author in P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR

Jong-Dae Kong (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Defeng Kong (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Ralf Konig (Max-Planck-Institüt für Plasmaphysik, Greifswald, Germany)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Ralph Konig (E4, Max-Planck-Institut Plasmaphysik, Greifswald, Germany)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Ralf Konig (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Ralf Konig (Max Planck Institut für Plasmaphysik, 17491 Greifswald, Germany)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Ralf Konig (Max-Planck-Institut für Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, D-17489 Greifswald, Germany)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Alexey Konin (JSC "NIIEFA", Saint-Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Satoshi Konishi (Institute of Advanced Energy, Kyoto University, Uji, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H
Co-author in P1.207 Environmental impact of nuclear fusion biomass gasification plant

Satoshi Konishi (Institute of Advanced Energy, Kyoto University, Uji,Kyoto, Japan)

Co-author in P1.149 Myth of initial loading tritium : modelling DEMO fuel system in power ascension tests

Satoshi Konishi (Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan)

Co-author in P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow

Satoshi Konishi (Institute of Advanced Energy, Kyoto University, Gokasho,Uji,Kyoto, Japan)

Co-author in P3.121 Integral experiments of neutron transport in blanket module with hydrogen ion beam

Satoshi Konishi (Institute of Advanced Energy, Kyoto University, Kyoto-fu, Japan)

Co-author in P2.166 Tritium and heat simultaneous non-contact recovery in vacuum

Chikara Konno (Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS

Chikara Konno (Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, Japan)

Co-author in P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS

A. Konobeev (Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Jurgen Konys (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Georgiy Koptelov (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Michal Kordac (TEO, Centrum výzkumu Řež, Husinec - Řež, Czech Republic)

Co-author in P4.188 Modelling tritium permeation during PbLi capsule irradiation

Michal Kordac (TEO, Centrum výzkumu Řež, Husinec - Řež, Czech Republic;Dept. of Chemical Engineering, University of Chemical Technology, Technická 5, Praha, Czech Republic)

Co-author in P1.170 Helium bubble release from Pb-16Li within the Breeding Blanket

S. Korepanov (Tri Alpha Energy, Inc, Rancho Santa Margarita, CA 92688, United States)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Stefan Korolczuk (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Stefan Korolczuk (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Andras Korossy-Khayll (FIRCROFT, Lingley House, 120 Birchwood Blvd, Warrington, Cheshire WA3 7QH, United Kingdom)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Soren Korsholm (Department of Physics, DTU Technical University of Denmark, Fysikvej, 2800 Kgs. Lyngby, Denmark)

Co-author in O4A.2 RAMI analysis of the ITER LFS CTS system

Gabor Koscis (RCP RMO, Wigner Institut, Budapest, Hungary)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Jacek Kosek (Central Integration Office, System Engineering Section, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067- St. Paul Lez Durance Cedex, France)

Co-author in P4.162 Dynamic model of ITER cryo-pumps cryogenic distribution system: torus pumping and regeneration scenarios

Lukas Kosek (Technical calculations department, Centrum vyzkumu Rez, Hlavni 130, 250 68, Rez, Czech Republic)

Co-author in P1.169 The current status and challenges of the PbLi cold trap development undertaken at CVR

Lukas Kosek (TEO, Centrum výzkumu Řež, Husinec - Řež, Czech Republic)

Co-author in P1.170 Helium bubble release from Pb-16Li within the Breeding Blanket
Co-author in P4.188 Modelling tritium permeation during PbLi capsule irradiation

Michal Kostal (Research Centre Rez, Husinec-Řež, Czech Republic)

Co-author in P4.072 Validation of 23Na(n,2n) cross section as neutron flux monitor in D-T fusion reactors

Norbert Koster (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Eric Koster (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

Alexandre Kotlinski (Ampegon AG, Turgi, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Eugene Kotomin (Institute of Solid State Physics, University of Latvia, Riga, Latvia)

Co-author in P3.184 Diffusion-controlled F center thermal annealing in neutron, electron and heavy-ion irradiated insulators

Vladislav Kotov (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425, Jülich, Germany)

Co-author in P3.055 Can gas puffs be used for cleaning of the diagnostic first mirrors in ITER?

Jurek Kotuła (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Huaqin Kou (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Konstantinos Kouloulias (Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom)

Co-author in P1.019 Measurement of flow velocity during natural convection in nanofluids

Pavol Kovac (Institute of Electrical Engineering, Slovak Academy of Sciences, Dúbravská cesta 9, SK-841 04 Bratislava, Slovakia)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

Jernej Kovacic (Reactor Physics Department, Jozef Stefan Institute, Jamova cesta 39,1000 Ljubljana, Slovenia)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

A. Kovacsik (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Alexander Koval (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Oleg Kovalchuk (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Michael D Kovari (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Michael Kovari (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Michael Kovari (Power Plant Technology Group, CCFE, Abingdon, United Kingdom)

Co-author in P2.194 Time-dependent power requirements for pulsed fusion reactors

Michael Kovari (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Ewa Kowalska-Strzeciwilk (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, 01-497 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Hiroshi Kozaka (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Jelena Kozlova (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Yuri Krasikov (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Yury Krasikov (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany)

Co-author in P4.078 Experimental and numerical studies of the shutter dynamics for the ITER core CXRS diagnostic

Yury Krasikov (Forschungszentrum Jülich GmbH, Juelich, Germany)

Co-author in P1.133 Specific design and structural issues of single crystalline first mirrors for diagnostics

Vitaly Krasilnikov (ITER Organization, St. Paul-lez-Durance, France)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Stepan Krat (Plasma Physics Department, National Research Nuclear University MEPhI, Moscow, Kashirskoe highway, 31, Russian Federation)

Co-author in P4.117 Low temperature deuterium release from lithium films

Werner Kraus (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Werner Kraus (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Wolfgang Krauss (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Vladimir Kravchuk (Megascience Department, NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Yu. Kravtsov (Institute of Physics, Maritime University of Szczecin, Waly Chrobrego 1-2, 70-500 Szczecin, Poland)

Co-author in P3.074 Influence of the geometry system on the effectiveness of polarimetric measurements in the thermonuclear plasma diagnostics

Rafał Krawczyk (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Rafal Krawczyk (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Natalia Krawczyk (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Rafal Krawczyk (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Rafal Krawczyk (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Jaroslav Krbec (Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, 115 19, Prague 1, Czech Republic;Tokamak Department, Institute of Plasma Physics of the Czech Academy of Sciences, Za Slovankou 1782/3, 182 00, Prague 8, Czech Republic)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Michal Kresina (DEN, CEA, Saint Paul-lez-Durance, France)

Co-author in P2.017 Comparison of detritiation techniques for purely tritiated metallic waste

Arkadi Kreter (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Karl Krieger (Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Vamshi Krishna (Electronics and Instrumentation Services Division, Bhabha Atomic Research Centre, Trombay, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

Y. Krivchenkov (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Alena Krivska (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Michael Krohn (Siemens AG, Process Industries and Drives Division, Large Drives, Industrial Applications PD LD AP DS TA EL, Gleiwitzer Str. 555, 90475 Nürnberg, Germany)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Wojciech Krolas (Institute of Nuclear Physics PAN, Kraków, Poland)

Co-author in P3.006 Feasibility of IFMIF-DONES for other science projects

Jon G. Krom (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Jon Krom (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Jon Krom (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Uron Kruezi (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Uron Kruezi (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Vadim Krupin (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Maciej Krychowiak (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Ireneusz Ksiazek (Institute of Physics, Opole University, Opole, Poland)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Duck Young Ku (NFRI, Daejeon, South Korea)

Co-author in P1.192 Sample holder design for effective thermal conductivity measurement of pebble-bed using laser flash method

Jindrich Kubak (TechSoft Engineering spol. s r.o., Na Pankráci 322/26, 140 00 Praha 4 - Nusle, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Monika Kubkowska (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Monika Kubkowska (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Monika Kubkowska (IPPLM, Warsaw, Poland)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Monika Kubkowska (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physic and Laser Microfusion, Warsaw, Poland)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Ondrej Kudlacek (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Georg Kuhner (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

Georg Kuhner (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Georg Kuhner (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Georg Kuhner (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Georg Kuhner (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Vladimir Kukhtin (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Vladimir Kukhtin (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Alexander B. Kukushkin (NRC “Kurchatov institute”, Moscow, Russian Federation;NRNU “MEPhI”, Moscow, Russian Federation)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

Andrei Kukushkin (NRC Kurchatov Institute, Moscow, 123182, 1 Akademika Kurchatova sq., Russian Federation;NRNU MEPhI, Moscow, 115409, 31 Kashirskoe sh., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Timur Kulsartov (Research Institute of Experimental and Theoretical Physics KazNU, 71 al-Farabi Ave., 050040, Almaty, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Timur Kulsartov (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Takuya Kumaki (Taiyo Nippon Sanso Corporation, 6-2 kojima, Kawasaki, Kanagawa, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

A. G. Ajith Kumar (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Manoj Kumar (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Varunesh Kumar (Veeral controls Pvt Ltd, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Punit Kumar (Department of Physics, University of Lucknow, Lucknow, India)

Co-author in P2.207 Guiding of laser beam in magnetized quantum plasma

Aveg Kumar (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Ajith Kumar (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Mohit Kumar (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Rajnish Kumar (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Ratnesh Kumar (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

Rajnish Kumar (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Praveena Kumari (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Chun Kung (Plasma Physics Laboratory, Princeton University, Princeton, New Jersey, United States)

Co-author in P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand

Kazuo Kuno (Mitsubishi Electric Co., Kobe, Hyogo 652-8555, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Andre Kunze (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P2.113 Model-based optimization of the heat flux distribution of IR-heaters for high heat flux testing

Igor Kupriyanov (Beryllium Department, A.A. Bochvar High Technology Research Institute of Inorganic Materials (JSC VNIINM), Rogova St. 5a, Moscow, Russian Federation)

Co-author in P2.173 Progress in development and qualification of beryllium for ITER blanket first wall in Russia

Rie Kurata (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Kenichi Kurihara (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Kenichi Kurihara (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Hironori Kurotaki (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Hironori Kurotaki (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Arkadiusz Kurowski (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Shinpei Kuroyanagi (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Gleb Kurskiev (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Richard J Kurtz (Pacific Northwest National Laboratory, Richland, WA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Boris Kuteev (Complex physical and chemical technologies, National Research Center "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P1.150 D-T fuel system of DEMO-FNS tokamak with tritium breeding blanket

Galina Kuzmina (National Research Centre Kurchatov Institute, Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Vladimir Kuzovkov (Institute of Solid State Physics, University of Latvia, Riga, Latvia)

Co-author in P3.184 Diffusion-controlled F center thermal annealing in neutron, electron and heavy-ion irradiated insulators

Sang-Woo Kwag (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Sang-Woo Kwag (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Jong-Gu Kwak (NFRI, Daejeon, South Korea)

Co-author in P2.029 Heating status and plasma performance in KSTAR

Jong gu Kwak (KSTAR Research center, NATIONAL FUSION RESEARCH INSTITUTE, 169-148 GWAHAK-RO, YUSEONG-GU, DAEJEON 34133, South Korea)

Co-author in P2.031 Design of high power traveling wave antenna for KSTAR helicon wave current drive

Jong-Gu Kwak (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond
Co-author in P2.074 Spatial Distribution of Accumulated Neutron Emission in KSTAR

Roch Kwiatkowski (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Roch Kwiatkowski (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Sang Woo Kwna (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Sungjin Kwon (DEMO Technology Division, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.120 Calculations on plasma radiation heat distribution on the first walls of the K-DEMO reactor

Sungjin Kwon (DEMO Technology Division, NationalFusionResearchInstitute, Daejeon, South Korea)

Co-author in P2.118 Preliminary analyses for electromagnetic loads of the K-DEMO divertor system

Sungjin Kwon (Fusion Engineering Center, DEMO Technology Division, National Fusion Research Institute (NFRI), Daejeon, South Korea)

Co-author in P2.119 R2S method based shutdown dose rate estimation on the K-DEMO equatorial port area

Giil Kwon (KSTAR Control Research Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Sungjin Kwon (DEMO Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Saerom Kwon (Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, Japan)

Co-author in P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS

Saerom Kwon (Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS

Stephen Kyle-Henney (TISICS Ltd, 22 Invincible Road, Farnborough, United Kingdom)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor

Albrecht Kyrieleis (Clean Energy – Europe, Amec Foster Wheeler, 305 Bridgewater Place, Warrington, WA3 6XF, United Kingdom)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Mariusz Kłosowski (Institute of Nuclear Physics Polish Academy of Sciences, ul. Radzikowskiego 152, 31-342 Krakow, Poland)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Rahul Laad (In-Walled Shield, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints

Matti Laan (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Florence Labasse (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Carmelenzo Labate (CREATE, Department of Engineering, University of Naples “Parthenope, Napoli, Italy)

Co-author in P1.023 Implementation of the SPIDER Central Interlock

Selece Laces (Unidad Académica de estudios nucleares, UAZ, Zacatecas CP: 98060, Mexico)

Co-author in P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES

Karl Lackner (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Benoit Lacroix (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Benoit Lacroix (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Pedro Lagos (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas

Pedro Lagos (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas

Pedro Lagos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Lisboa, Portugal)

Co-author in P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system

Anna Lagutkina (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

N. Lam (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Norman Lam (CCFE, Abingdon, United Kingdom)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Philippe Lamalle (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul Lez Durance, France)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

Horst Lambertz (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Aitzol Lamikiz (Departamento de Ingeniería Mecánica, Universidad del País Vasco UPV/EHU, Alameda de Urquijo s/n, 48013 Bilbao, Spain)

Co-author in P2.128 Analysis of a portable machine for post-welding operations within the vacuum vessel of ITER

Alessandro Lampasi (Dipartimento Fusione e Tecnologie per la Sicurezza Nucleare (FSN), Enea, Via Enrico Fermi, 45 00044 Frascati (Roma), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Alessandro Lampasi (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Alessandro Lampasi (FSN-FUSTEC-IEE, ENEA, FRASCATI (ROME), Italy)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Evgeny Lamzin (JSC «NIIEFA», St.Petersburg, Russian Federation)

Co-author in P4.010 Speeding up predictive electromagnetic simulations for tokamak application

Evgeny Lamzin (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

T. Lan (Department of Modern Physics, University of Science and Technology of China, Jinzhai Road 96#, 230026,Hefei, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Andrey Lancetov (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Claudia Lanchi (ENEA, Centro Ricerche Frascati, Italy, Frascati, Italy)

Co-author in P2.010 The DTT device: general layout

Jean-Daniel Landis (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Jean-Daniel Landis (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Jean-Daniel Landis (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Igor Landman (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Peter Lang (Tokamak Scenario Development Division (E 1), Max-Planck-Institut for Plasmaphysics, Garching, Germany)

Co-author in P2.019 Conceptual design of the JT-60SA pellet launching system

Peter Lang (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Peter Thomas Lang (Max Planck Institute for Plasma Physics, 85748 Garching, Germany)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Peter T. Lang (Max Planck Institute for Plasma Physics, EURATOM Association, 85748 Garching, Germany)

Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

P. T. Lang (Max-Planck-Institute of Plasma Physics (IPP), Garching, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Christian Lange (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Stefanie Agnes Elisabeth Langeslag (CERN, Geneva, Switzerland)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

A. Langhorn (Startech Inc., PO Box 573, Solana Beach, CA 92075, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Heike Laqua (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Heique Laqua (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Wendelsteinstraße 1, D-17491 Greifswald, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Heike Laqua (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Heike Laqua (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany;Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Sebastien Larroque (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Sebastien Larroque (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Sebastien Larroque (CEA IRFM, Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Alexander Lashukov (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

C.J. Lasnier (Lawrence Livermore National Laboratory, Livermore, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

C. Lasnier (Lawrence Livermore National Laboratory, Livermore, California, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

E. Laszynska (Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw, Poland, Poland)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

E Laszynska (Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw, Poland)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Bruno Laterza (Consorzio RFX, Pdova, Italy)

Co-author in P4.007 Final design and prototyping of the SPIDER caesium ovens

Georges Latsas (Faculty of Physics, National and Kapodistrian University of Athens, Zografou, GR-157 84, Athens, Greece)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

George P. Latsas (Faculty of Physics, National and Kapodistrian University of Athens, Athens, Greece)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Menno Lauret (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, United States)

Co-author in P3.041 Nonlinear sliding mode control of the current density profile in tokamaks

Pierre Lavanchy (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

R. Lawless (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Andrada Lazea-Stoyanova (National Institute for Laser, Plasma and Radiation Physics, 409 Atomistilor Street, Magurele, Romania)

Co-author in P3.108 Production of tungsten particles from a radiofrequency plasma jet

Samual Lazerson (Princeton Plasma Physics Laboratory, Princeton University, Princeton, NJ 08543, United States)

Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

Gabriele Lazzaro (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Quentin Le Coz (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Frederic Le Fol (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Frederic le Guern (Fusion for Energy, Barcelona, Spain)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Frederic Le Guern (Diagnostics, Fusion for Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P3.054 ITER Diagnostic Shutters

Carsten Lechte (IGVP, University of Stuttgart, Pfaffenwaldring 31, 70569 Stuttgart, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Francesco Ledda (Department of Industrial and Information Engineering, Seconda Università degli studi di Napoli, IT-81031, Aversa, Italy)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Francesco Ledda (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Francesco Ledda (Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Heun Tae Lee (Osaka university, Osaka, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Chul-Hee Lee (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Kwang Won Lee (Korea Atomic Energy Research Institute (KAERI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Dong Won Lee (KAERI, 111, Daedeok-daro 989, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Young-Ju Lee (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Jonghwa Lee (VITZROTECH Co., Ansan, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR
Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Gisik Lee (Mobiis, Seoul, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

D.W. Lee (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Youngmin Lee (TBM Technology Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process

Hyeun Gon Lee (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

Woongryol Lee (KSTAR Control Research Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Heun Tae Lee (Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P3.153 Sensitivity analysis of tritium retention in tungsten walls using a fusion reactor simulation code

Youngmin Lee (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Jeongwon Lee (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Eo Hwak Lee (KAERI, 111, Daedeok-daro 989, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Dong Won Lee (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
Co-author in P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component

Si-Woo Lee (Jinsolturbo Machinery Co., Ltd, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Taegu Lee (KSTAR Control Research Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Young-Ju Lee (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Dong Won Lee (KAERI, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Juhyoung Lee (VITZROTECH Co., Ansan, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR
Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Chul-Hee Lee (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Dong Won Lee (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Eo Hwak Lee (KAERI, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Eo Hwak Lee (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Tae-Ho Lee (Korea Institute of Materials Science (KIMS), Changwon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

J. Lee (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Hyeon Gon Lee (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Suong-hun Lee (National Fusion Research Institute (NFRI), Daejeon Yuseong-gu, South Korea)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

H.Y. Lee (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Jong-ha Lee (National Fusion Research Institute (NFRI), Daejeon Yuseong-gu, South Korea)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

Kihyun Lee (Department of Nuclear Enigneering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

J.H. Lee (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Chang-Hoon Lee (Korea Institute of Materials Science (KIMS), Changwon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

Heun Tae Lee (Osaka University, Suita, Japan)

Co-author in P3.101 Tungsten and Iron sputtering properties over recrystallization temperature

Youngseok Lee (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.074 Spatial Distribution of Accumulated Neutron Emission in KSTAR

Hyeon-Gon Lee (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Kwang Won Lee (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Kihyun Lee (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Jeong-Hun Lee (Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744, South Korea)

Co-author in P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events

William E. Lee (Department of Materials, Imperial College London, Prince Consort Road, London, SW7 2BP, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

Dong Won Lee (Nuclear Fusion Engineering Development Department, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P2.135 Components Design and Performance Analysis for the Preliminary Design of HCCR TBM-set

Chang-Hoon Lee (Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Tae-Ho Lee (Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Dongwon Lee (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Deajeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Tae-Ho Lee (Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Chang-Hoon Lee (Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Hyeon Gon Lee (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Jin-Jong Lee (Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea;Pusan National University, Pusan 609-735, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Youngmin Lee (NFRI, Daejeon, South Korea)

Co-author in P1.192 Sample holder design for effective thermal conductivity measurement of pebble-bed using laser flash method

X. Lefebvre (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Fernando Legarda (Nuclear Engineering and Fluid Mechanics, University of the Basque Country (UPV/EHU), Bilbao, Spain)

Co-author in P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi

Frederic Leguern (F4E, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Teresa Leguey (Department of Physics, University Carlos III Madrid, Leganes, Spain)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Michael Lehnen (Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212, Japan)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Lei Lei (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Mingzhun Lei (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Mingzhun Lei (Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE

D. Leichtle (Fusion for Energy (F4E), Josep Pla 2, Barcelona 08019, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

D. Leichtle (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019, Spain)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Dieter Leichtle (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

Frank Leipold (Department of Physics, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Peter Leitenstern (Max-Planck-Institut fuer Plasmaphysik, 85748 Garching, Germany)

Co-author in P4.083 Standardization of the hard- and software used to operate manipulators at ASDEX Upgrade

Igor Lengar (Slovenian Fusion Association, Jozef Stefan Institute, Reactor Physics Department, Ljubljana, Slovenia)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

I. Lengar (Jozef Stefan Institute, Ljubljana, Slovenia)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

I. Lengar (Slovenian Fusion Association, Jozef Stefan Institute, Ljubljana, Slovenia)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

I. Lengar (Reactor Physics Department, Jozef Stefan Institute, SI-1000 Ljubljana, Slovenia, Slovenia)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Morten Lennholm (Jet Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;European Commission, B-1049 Brussels, Belgium)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Morten Lennholm (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

A.W. Leonard (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Wolfgang Leonhardt (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Zakharov Leonid (Princenton University Plasma Physics Laboratory, Princeton, NJ 08543, United States)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Ernesto Lerche (LPP-ERM/KMS, Brussels, Belgium)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Ernesto Lerche (Laboratory for Plasma Physics, LPP-ERM/KMS. TEC Partner, Brussels, Belgium)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Ernesto Lerche (Laboratory for Plasma Physics, Koninklijke Militaire School - Ecole Royale Militaire, Renaissancelaan 30 Avenue de la Renaissance B-1000 Brussels, Belgium;CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Andrey Leshukov (JSC “NIKIET”, Moscow, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Andrey Leshukov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Timothy Lessard (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Laurent Letellier (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Maria Levashova (NRC Kurchatov Institute, Moscow, 123182, 1 Akademika Kurchatova sq., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Monika Lewandowska (West Pomeranian University of Technology, Szczecin, Poland)

Co-author in P1.087 Thermal-Hydraulic and Quench Analysis of the DEMO Toroidal Field Winding Pack WP1

Monika Lewandowska (Institute of Physics, Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology, Szczecin, Al. Piastow 48, 70-311 Szczecin, Poland)

Marc Lewerentz (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Marc Lewerentz (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Marc Lewerentz (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Wendelsteinstraße 1, D-17491 Greifswald, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Marc Lewerentz (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Oliver Leys (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.171 Enhanced Jet Stability For The Melt-Based Production Of Lithium Orthosilicate/Metatitanate Pebbles

Oliver Leys (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, 76021, Karlsruhe, Germany)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Huajun Li (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Zaixin Li (Center For Fusion Science, Southwestern Institute of Physics (SWIP), Chengdu, Sichuan, China)

Co-author in P4.201 Neutronics study on HCCB blanket for CFETR

Q. Li (Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), Hefei, Anhui, China)

Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Jiangang Li (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Kang Li (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Guoqiang Li (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Wei Li (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Muyuan Li (Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.114 Design options to avoid deep cracking of tungsten armor at 20 MW/m2

Sheng Li (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Sheng Li (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Jia Li (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P3.204 A novel approach to improve the calculation efficiency of the GVR method

Jiaxian Li (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Qian Li (Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.187 Study on the optimization of Cu/SS explosion bonding for ITER first wall components

Pan Li (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.157 Activation analysis of CFETR WCCB blanket

Taosheng Li (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Yuanjie Li (USTC, hefei, China)

Co-author in P1.160 The thermal analysis to pebble bed of CFETR

Changzhen Li (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Bo Li (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Ming Li (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

Jiangang Li (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Wei Li (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P3.163 The assessment of shutdown dose rate of HCSB during its replacement in CFETR

Ming Li (Mechanical Engineering, School of Energy Systems, Lappeenranta Uinversity of Technology, Lappeenranta, Finland)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Jia Li (USTC, hefei, China)

Co-author in P1.160 The thermal analysis to pebble bed of CFETR

Wei Li (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Wei Li (Southwestern Institute of Physics, Chengdu, China)

Chuan Li (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, China, 1037 Luoyu Road, Wuhan, Hubei Province, 430074, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

Jiangang Li (for CFETR team, Institute of Plasma Physics, Chinese Academy of Science, Hefei, Anhui, 230031, China)

Co-author in I2.2 Progresses and Activities on the Chinese Fusion Engineering Test Reactor

Muyuan Li (Max Planck Institute for Plasma Physics, Boltzmann Str. 2, 85748 Garching, Germany)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Bo Li (Southwestern Institute of Physics, Chengdu, China)

Ming Li (Lappeenranta University of Technology, Skinnarilankatu 34 53850 Lappeenranta, Finland)

Co-author in P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm

Ming Li (Lab of Intelligent Machines, Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Antonella Li Puma (Laboratoire des Technologies d’Assemblage, CEA, F-91191 Gif sur Yvette, France)

Co-author in O5A.4 Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions

L. Liang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

Yuanxu Liao (Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031, P.O. Box 1126, Hefei, Anhui Province, 230031, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

Paul Libeyre (ITER Organization, , Route de Vinon sur Verdon, CS 90 046 - 13067 St. Paul lez Durance cedex, France)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

Tim Lienig (Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Christophe Lievin (Thales Electron Devices, Velizy Villacoublay, France)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Karine Liger (DEN, CEA, Saint Paul-lez-Durance, France)

Co-author in P2.017 Comparison of detritiation techniques for purely tritiated metallic waste

Karine Liger (CEA Cadarache, DTN/SMTA/LIPC Bât 208, 13108 St Paul lez Durance, France)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Karine Liger (CEA Cadarache, Saint Paul lez Durance, France)

Co-author in P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics

Jari Likonen (VTT Technical Research Centre of Finland, Espoo, Finland)

Co-author in P1.108 Influence of divertor material modifications on the inventory of tritium in the divertor region

J. Likonen (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Technical Research Center of Finland Ltd., P. O. Box 1000, 02044 VTT, Finland)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

S. Lilley (Nuclear Technology Department, UKAEA, Abingdon, United Kingdom)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Kisuk Lim (SFA Engineering Corp., Asan, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Jongmin Lim (KAERI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Tao Lin (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Paweł Linczuk (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Macarena Liniers (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Jochen Linke (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung, 52425 Juelich, Germany)

Co-author in O5B.1 Post-irradiation high heat flux investigation of plasma facing components

Christian Linsmeier (Institut für Energie- und Klimaforschung – Plasmaphysik, IEK-4, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Linsmeier Linsmeier (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Christian Linsmeier (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.180 Yttrium oxide coatings as tritium permeation barriers

Christian Linsmeier (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Christian Linsmeier (Institut für Energie und Klimaforschung/Plasmaphysik (IEK-4), Forschungszentrum Jülich (TEC Partner), D-52435 Jülich, Germany)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Christian Linsmeier (Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Christian Linsmeier (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Christian Linsmeier (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Christian Linsmeier (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

Chailan Lionel (Nuclear Safety Department, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Cadarache, Saint-Paul-lez-Durance, 13115, France)

Co-author in P4.195 ASTEC simulations of dust resuspension in fusion containments compared with the “STARDUST” experimental data

Uwe Lippmann (Fraunhofer IOF, Institut für Angewandte Optik und Feinmechanik, Albert-Einstein-Str. 7 07745 Jena, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Bruce Lipschultz (University of York, York, United Kingdom;Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Xu LiRong (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Steve W. Lisgo (ITER Organization, St Paul-lez-Durance, France)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

Valery Lisitsa (NRC Kurchatov Institute, Moscow, 123182, 1 Akademika Kurchatova sq., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Alexander Listopad (BINP SB RAS, Novosibirsk, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Andrey Litnovsky (Institute of Energy and Climate Research – Plasmaphysics, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Andrey Litnovsky (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Andrey Litnovsky (Institut für Energie- und Klimaforschung – Plasmaphysik, IEK-4, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Andrey Litnovsky (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Andrey Litnovsky (Institut für Energie und Klimaforschung/Plasmaphysik (IEK-4), Forschungszentrum Jülich (TEC Partner), D-52435 Jülich, Germany)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Nikolay Litunovsky (“Efremov Institute”, St. Petersburg, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Andrey Litvinov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Shaojun Liu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P1.194 Status and strategy of the study on the neutron irradiation damage of CLAM steel

Haifeng Liu (Institute of Fusion Science, School of Physical Science and Technology,Southwest Jiaotong University, Chengdu, China;Physics Department, Sichuan university, Chengdu, China)

Co-author in P3.032 Hybrid-order nonlinear resonant interaction between an Alfvén wave and ions

Songlin Liu (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui 230031, China)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Yi Liu (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

Xiaojv Liu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Shiming Liu (Modern mechanics, university of science and technology of China, hefei, China)

Co-author in P4.107 Numerical simulation on coupled thermal fatigue behavior of first wall in fusion reactor

Shaojun Liu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel

Bo Liu (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Li Liu (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei, Anhui, 230026, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

Zhihong Liu (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Road, Hefei, Anhui 230031, China)

Co-author in P4.141 Research of NG-TIG welding technology on full-scale sector prototype of CFETR vacuum vessel

Hua Jun Liu (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Songlin Liu (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shuhanhu Road, Hefei, Anhui, China)

Co-author in P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR

Fang Liu (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Songlin Liu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.145 Numerical simulation of purge gas flow in binary pebble beds based on DEM-CFD method

Xufeng Liu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

Zhihong Liu (instititue of plasma physics chinese academy of sciences, HEFEI. ANHUI, China)

Co-author in P4.142 A Study on Assembly Technology of the CFETR 1/32 Vacuum Vessel

Zixi Liu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Xiaoju Liu (Institute of plasma physics chinese academy of sciences, Hefei, China)

Co-author in P1.124 Evaluation of heat load on CFETR divertor for impurity seeding using SOLPS

Jian Liu (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Danhua Liu (Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.187 Study on the optimization of Cu/SS explosion bonding for ITER first wall components

Xiang Liu (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Songlin Liu (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.157 Activation analysis of CFETR WCCB blanket

Meng Liu (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Yuxiang Liu (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Zhenxing Liu (Department of Reactor Engineering Research & Design, China Institute of Atomic Energy, Beijing, China)

Co-author in P3.155 Study on pssure resistance and separation of hydrogen isotopes of Palliadium packed columns

Chao Liu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Songlin Liu (ASIPP, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Sumei Liu (School of Engineering, Anhui Agricultural University, Hefei, China;Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE

Chao Liu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

Songlin Liu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China;University of Science and Technology of China, Hefei, Anhui, 230027, China)

Co-author in P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR

Ping Liu (Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Xavier Llobet (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

S. Lloyd (ITER CS Project, General Atomics, San Diego, California, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Alessandro Lo Bue (Fusion for Energy, Josep Pla 2, 08019 Barcelona , Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

R. Lo Frano (Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 2-56126, Pisa, (PI), Italy)

Co-author in P1.140 Three-dimensional condensation regime of steam injected into water at sub-atmospheric conditions

Thierry Loarer (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Thierry Loarer (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Thierry Loarer (IRFM, CEA, Saint-Paul-Lez-Durance, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Thierry Loarer (CEA, IRFM, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

G Douglas Loesser (Engineering, PPPL, Princeton, NJ, United States)

Co-author in P2.121 Detailed design and analysis of Wendelstein 7-X scraper element

Doug Loesser (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

John Lohr (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

Vladimir Lokiev (JSC "NIIEFA", Saint-Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Peter Lomas (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Pengcheng Long (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Maurizio Lontano (Istituto di Fisica del Plasma, Consiglio Nazionale delle Ricerche, Via R.Cozzi 53, 20125 Milano, Italy)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Pedro Lopes (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Tecnico, Av. Rovisco Pais 1, Lisboa, Portugal)

Co-author in O3C.4 Assessment of navigation technologies for autonomous vehicles in nuclear fusion facilities

Sergio Lopez (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Julia Lorenz (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.105 Mechanical characterization of electrochemically based W–Cu joints for low temperature heat sink application

Axel Lorenz (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Luciano Lorenzelli (FSN-ING-PAN, ENEA Brasimone, Camugnano (BO), Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Stefano Loreti (Department of Fusion and Nuclear Safety Technology, ENEA, 00044 Frascati (Rome), Italy)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

Stefano Loreti (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

S. Loreti (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome) Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Evzen Losa (Research Centre Rez, Husinec-Řež, Czech Republic)

Co-author in P4.072 Validation of 23Na(n,2n) cross section as neutron flux monitor in D-T fusion reactors

Markus Losert (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Philippe Lotte (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Fabrice Louche (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Fabrice Louche (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Cephise Louison (IRFM, CEA, Saint Paul Lez Durance, France;Institute of Movement Sciences, Aix-Marseille University, CNRS, Marseille, France)

Co-author in P4.137 Operators' accessibility studies using virtual reality

Alexandre Louzguiti (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Alexandre Louzguiti (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Antony Loving (RACE, UKAEA, Culham Science Centre, Oxfordshire, United Kingdom)

Co-author in O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies

Tony Loving (RACE, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO

Antony Loving (Remote Applications in Challenging Environments, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Christopher Lowry (European Commission, B1049 Brussels, Belgium;JET Exploitation Unit, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Lei Lu (INR-NK, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Yong Lu (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Mingxuan Lu (Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE

L. Lu (Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Lei Lu (Neutronics and Nuclear Data Group, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.200 Improved Solid Decomposition Algorithms for the CAD-to-MC Conversion Tool McCad

Kun Lu (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Lei Lu (Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.153 Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO

Grando Luca (Consorzio RFX, Corso Stati Uniti 4, Italy)

Co-author in P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests

Timothy C. Luce (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

Adriano Luchetta (Consorzio RFX, Padova, Italy)

Co-author in P1.023 Implementation of the SPIDER Central Interlock
Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment
Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Adriano Luchetta (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Adriano Francesco Luchetta (Consorzio RFX, Padova, Italy)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Catalin Luculescu (National Institute for Laser, Plasma and Radiation Physics, Atomistilor Str. 409, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Alfred Ludwig (Institute for Materials, Ruhr-Universität Bochum, 44780 Bochum, Germany)

Co-author in P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process

Raul Luis (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas

Raul Luis (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas

Raul Luis (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Lisboa, Portugal)

Co-author in P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system

Frantisek Lukac (Department of Materials Engineering, Institute of Plasma Physics, Praha, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Victor Lukash (National Research Centre «Kurchatov Institute», Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Alexander Lukin (PELIN LLC, Saint-Petersburg, Russian Federation)

Co-author in P4.006 Development of pellet injection system for KSTAR

Alexey Lukin (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Alexander Lukin (PELIN, LLC., Saint-Petersburg, Russian Federation)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Vitaly Lukyanov (NRC Kurchatov Institute , , Moscow, 123182, Akademika Kurchatova sq. 1, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Arnold Lumsdaine (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Arnold Lumsdaine (Oak Ridge National Laboratory, Oak Ridge, TN 37831, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Cristian Lungu (3National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Cristian Petrica Lungu (National Institute for Laser, Plasma and Radiation Physics, Atomistilor Str. 409, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Cristian P. Lungu (National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies

Mihail Lungu (Faculty of Physics, University of Bucharest, Atomistilor Str. 405, 077125, Magurele, Romania;National Institute of Materials Physics , Atomistilor Str. 105 bis, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Tilmann Lunt (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

X. Luo (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Wenhua Luo (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Deli Luo (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Zhengping Luo (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

G.-N. Luo (Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), Hefei, Anhui, China)

Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Ivan Lupelli (EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, United Kingdom)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

Ivan Lupelli (UKAEA-CCFE, Abingdon, United Kingdom)

Co-author in P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling

Ivan Lupelli (Theory and Modelling, CCFE, Abingdon, United Kingdom)

Co-author in P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE

Natalia Luptakova (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Aleksandr Lushchik (Institute of Physics, University of Tartu, Tartu, Estonia)

Hanni Lux (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Hanni Lux (CCFE, Abingdon, United Kingdom)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Zhongliang Lv (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Zhongliang Lv (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P3.163 The assessment of shutdown dose rate of HCSB during its replacement in CFETR

Anatoli Lyssoivan (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

B. Lyu (Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Boris Lyublin (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Janne Lyytinen (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Xuebin Ma (ASIPP, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Xuebin Ma (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China;University of Science and Technology of China, Hefei, Anhui, 230027, China)

Co-author in P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR

Jianguo Ma (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Road, Hefei, Anhui 230031, China)

Co-author in P4.141 Research of NG-TIG welding technology on full-scale sector prototype of CFETR vacuum vessel

Rui Ma (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Xuebin Ma (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui 230031, China)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Timo Maatta (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Felix Mackel (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Giorgio Maddaluno (FSN, ENEA, via E. Fermi 45 - 00044 Frascati, Italy)

Co-author in P2.008 The DTT device: plasma wall interaction issues

Sunao Maebara (Rokkasho Fusion Research Institute, JAPAN ATOMIC ENERGY AGENCY, Kitakami, Aomori, Japan)

Co-author in P2.209 RF power tests of rf input coupler for the IFMIF/EVEDA RFQ prototype linac

Takeru Maeji (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Takeru Maeji (Osaka University, Suita city, Japan)

Co-author in P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation

Tetsuya Maejima (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Giuseppe Maffia (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Philippe Magaud (CEA, Saint Paul Lez Durance, France)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Philippe Magaud (CEA Cadarache, Saint-Paul-lez-Durance, France)

Co-author in P1.137 Qualification, manufacturing and assembly of the WEST divertor structure and coils

Daniele Maggio (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P4.204 Economic assessment of different operational reactor cycle structures in a pulsed DEMO-like power plant

Edoardo Maggiora (COELME Costruzioni Elettromeccaniche S.p.A., via G. Galilei n° 1/2, 30036 S. Maria di Sala (Venezia), Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

R. Maggiora (Politecnico de Torino, Torino, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Riccardo Maggiora (Dipartimento Elettronica, Politecnico di Torino, Torino, Italy)

Co-author in P2.007 The DTT device: systems for heating

Lida Magielsen (Research and Innovation, NRG, Petten, Netherlands)

Co-author in P3.161 Post irradiation examination of High Dose irradiated Beryllium (HIDOBE-02) in the High Flux Reactor

Lida Magielsen (NRG Nuclear Research and consultancy Group, P.O Box 25, 1755ZG Petten, Netherlands)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Kirti Mahajan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Abha Maheshwari (In Wall Shielding, ITER-India, Gandhinagar, India)

Co-author in P1.186 Study of Magnetic Properties of IWS Materials during Material and Component Manufacturing

Gaurang I. Mahsuriya (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Hans Maier (Plasmarand und Wand, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Hans Maier (Max-Planck-Institut für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Ivan A. Maione (Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.120 Development of force reconstruction method on EU ITER TBM based on strain measurements

Ivan Alessio Maione (Institute for Neutron Physics and Reactor Technology , Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.122 Analysis of Lorentz’s and Maxwell’s forces on DEMO segments under normal and off-normal conditions

Ivan Maione (KIT, Karlsruhe, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

Adam Maj (Institute of Nuclear Physics PAN, Kraków, Poland)

Co-author in P3.006 Feasibility of IFMIF-DONES for other science projects

Oleg Makarov (State Scientific Center – Research Institute of Atomic Reactors, Dimitrovgrad, Russian Federation)

Co-author in P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels

Aleksey Makhankov (“Efremov Institute”, St. Petersburg, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Harri Makinen (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Azadsinh R. Makwana (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Artur Malaquias (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001, Lisbon, Portugal)

Co-author in P4.065 90 degrees cylindrical energy analyzer for the plasma potential fluctuations measurements on the tokamak ISTTOK

Andrea Malavasi (ENEA Brasimone R.C., 40032 Camugnano, Bologna, Italy)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Andrea Malavasi (FSN-ING, ENEA, Camugnano, Italy)

Co-author in P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM

Stanislav Malec (Energy Engineering, CTU in Prague, FME, Prague-6, Czech Republic)

Co-author in P2.109 Heat transfer enhancement of the DEMO first wall water cooling

Karol Malinowski (Institute of Plasma Physics and Laser Microfusion, 23 Hery Street, 01-497 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Leszek Malinowski (Faculty of Maritime Technology and Transport, West Pomeranian University of Technology, Szczecin, Al. Piastow 41, 71-065 Szczecin, Poland)

Co-author in P2.196 Analysis of the secondary circuit of the DEMO fusion power plant using GateCycle

Karol Malinowski (Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland)

Leszek Malinowski (Faculty of Maritime Technology and Transport, West Pomeranian University of Technology, Szczecin, Al. Piastów 41, 71-065 Szczecin, Poland)

Co-author in P1.083 Experimental stand for thermal-hydraulic tests of forced flow conductors using water at room temperature

Andrea Malizia (Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

Andrea Malizia (Industrial Engineering, University of Rome Tor Vergata, Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Andrea Malizia (Industrial Engineering, Associazione EUROFUSION-ENEA, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Andrea Malizia (Associazione EUROFUSION-ENEA, Department of Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Bert Maljaars (Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, Netherlands)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Bert Maljaars (Faculty of Mechanical Engineering, Control Systems Technology Group, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, Netherlands)

Co-author in P2.044 Plasma internal profile control using IDA-PBC: Application to TCV

Marta Malo (Fundación UNED-Ciemat, Madrid, Spain)

Co-author in P3.146 H isotope thermo-diffusion in structural materials

Marta Malo (National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain;National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain)

Co-author in P3.172 Displacement damage effect on the thermal stability of deuterium in SiC

Marta Malo (National Fusion Laboratory, CIEMAT, Avenida Complutense 40, E-28040 Madrid, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Marta Malo (Fundación UNED-CIEMAT, Madrid, Spain)

Marta Malo (LNF-DTF, CIEMAT, Madrid, Spain)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Fadhel Malouch (Den-Service d’études des réacteurs et de mathématiques appliquées (SERMA), CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in O5A.3 Recent developments in the TRIPOLI-4® Monte-Carlo code for fusion applications

F. Malouch (CEA-Saclay, DEN, DM2S, SERMA, 91191 Gif-sur-Yvette, France)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Dmitry Mamchits (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Ranjana Manchanda (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

A. Mancini (ENEA, Frascati, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Andrea Mancini (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Davide Mancusi (Den-Service d’études des réacteurs et de mathématiques appliquées (SERMA), CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette, France)

Co-author in O5A.3 Recent developments in the TRIPOLI-4® Monte-Carlo code for fusion applications

Hugo Mandar (Institute of Physics, University of Tartu, Tartu, Estonia)

Co-author in P2.190 Spinel based optical materials for fusion applications

Gabriele Manduchi (Consorzio RFX, Padova, Italy)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Gabriele Manduchi (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Moreno Maniero (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Klaus Mank (Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Imran A. Mansuri (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Imran Mansuri (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Nicolas Mantel (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Ana Manzanares (Greenlight Solutions S.L, San Bernardo 20-1, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Maksim Manzuk (Joint Stock Company "D.V. Efremov Institute of Electrophysical Apparatus", Doroga na Metallostroy, 3, 196641 St. Petersburg, Russia, Russian Federation)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Xin Mao (Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Yiran Mao (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Bingyan Mao (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

Shifeng Mao (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei 230026, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Shifeng Mao (School of Nuclear Sciences and Technology, University ofScience and Technology of China, Hefei, China)

Co-author in P1.015 Integration design platform of CFETR

Bingyan Mao (Laboratory of Intelligent Machines, Lappeenranta University of Technology, lappeenranta, Finland;State Key Laboratory of Mechanical Transmission, Chongqing University, chongqing, China)

Co-author in P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators

Weicheng Mao (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Shifeng Mao (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei, Anhui, 230026, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

Bingyan Mao (State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Luis Maqueda (ESTEYCO, Calle Menéndez Pidal, 17, 28036 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Luis Maqueda (ESTEYCO, C. Menéndez Pidal 17, 28036 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Luis Maqueda (Esteyco Mechanics, Esteyco, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

Philippe Maquet (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Philippe Maquet (Bertin Systèmes Instrumentation, Bertin Technologies, Aix-en-Provence, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Philippe Maquet (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Marc Maraschek (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Valentina Marascu (National Institute for Laser, Plasma and Radiation Physics, 409 Atomistilor Street, Magurele, Romania;Faculty of Physics, University of Bucharest, 405 Atomistilor Street, Magurele, Romania)

Co-author in P3.108 Production of tungsten particles from a radiofrequency plasma jet

Giuseppe Marchiori (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P1.075 Upgraded electromagnetic measure system for RFX-mod
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Giuseppe Marchiori (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Giuseppe Marchiori (Consorzio RFX, Padua, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Giuseppe Marchiori (Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade

Benjaminas Marcinkevicius (Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Tardocchi Marco (IFP-CNR, Via Cozzi 53, 20125 Milano, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Nicolo Marconato (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors

Nicolo Marconato (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Aurelian Marcu (National Institute for Laser, Plasma and Radiation Physics, Atomistilor Str. 409, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Diego Marcuzzi (Consorzio RFX, 4, Corso Stati Uniti - 35127, Padova, Italy)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Jean Louis Marechal (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Porfiri Maria Teresa (Fusion Nuclear Tecnologies, Ente Nazionale Energia Ambiente, Via Enrico Fermi, 45 Frascati, Italy)

Co-author in P4.195 ASTEC simulations of dust resuspension in fusion containments compared with the “STARDUST” experimental data

Giovanni Mariano (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186, Roma, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Giovanni Mariano (Department of Astronautics, Electrical and Energetics Engineering, Sapienza University of Rome, Corso Vittorio Emanuele II, 244 - 00186 Rome, Italy, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Tomas Markovic (Tokamak, Institute of Plasma Physics, Czech Academy of Sciences, Prague 8, Czech Republic)

Co-author in P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux

Tomas Markovic (Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00, Prague, Czech Republic;Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 3, 121 16, Prague, Czech Republic)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Blaise Marletaz (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Blaise Marletaz (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Philippe Marmillod (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Philippe Marmillod (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Daniele Marocco (Dipartamento FSN, ENEA C. R. Frascati, E. Fermi 45, 00044 Frascati(Roma), Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

D. Marocco (ENEA C. R. Frascati, Dipartimento FSN, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Daniele Marocco (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Mirko Marquardt (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Lionello Marrelli (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Lionello Marrelli (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

C. Marren (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Roy Marshall (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Daniele Martelli (Dipartimento di Ingegneria Civile e Industriale , University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy)

Co-author in P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis

Emanuela Martelli (ENEA , Brasimone Camugnano, Italy)

Co-author in P3.135 Rationale and Method for design of DEMO WCLL Breeding Blanket Poloidal Segmentation

Daniele Martelli (Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy)

Co-author in P4.190 Experimental loop and purification system design for corrosion in flowing PbLi

Emanuela Martelli (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186 Roma, Italy)

Co-author in P2.148 CFD analysis of WCLL breeding blanket module design

Emanuela Martelli (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II, 244, 00186, Roma, Italy)

Co-author in P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold

Emanuela Martelli (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186, Roma, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Hannu Martikainen (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Alex Martin (ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Vincent Martin (Bertin Technologies, Aix-En-Provence, France)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Alex Martin (ITER Organisation, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Fernando Martin (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Yves Martin (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Alex Martin (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex – France, France)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Vincent Martin (Bertin Technologies, 55 rue Louis-Armand, 13593 Aix-en-Provence, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Jean Marc Martinez (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex – France, France)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Emili Martinez (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Andre Martinez (CEA IRFM, Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Jose Manuel Martinez-Esnaola (Departament of Materials, CEIT-IK4, Paseo Manuel Ladrizábal 15, E-20018 San Sebastián, Spain;Tecnun, University of Navarra, Paseo de Manuel Lardizábal 13, E-20018 San Sebastian, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Jose Martinez-Fernandez (Laboratorio Nacional de Fusión (LNF), Centro de Investigaciones Tecnológicas, Medioambientales y Tecnológicas (CIEMAT), Av. Complutense 40, 28040 Madrid, Spain)

Co-author in P3.075 Preliminary assessment of ex-vessel waveguides for the ITER Plasma Position Reflectometer

Raffaele Martone (Department of Industrial and Information Engineering, Seconda Università degli studi di Napoli, IT-81031, Aversa, Italy)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Raffaele Martone (Consorzio CREATE & Seconda Università di Napoli, DIII, , Aversa, Italy)

Co-author in P2.010 The DTT device: general layout

Raffaele Martone (Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Raffaele Martone (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Nicolai Martovetsky (US ITER, LLNL/ORNL, Oak Ridge, United States)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Nicolai Martovetsky (US ITER Project Office, Oak Ridge (TN), United States)

Co-author in P3.080 Performance analysis of ITER CSI coil and conductor 1A of the ITER CSMC

Yuriy Martynenko (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

So Maruyama (ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds

So Maruyama (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Takahito Maruyama (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Takahito Maruyama (Department of ITER Project, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.128 Recovery from failures of ITER Blanket Remote Handling System

Takahito Maruyama (Fusion Research and Development Directorate, ITER Project Unit, Remote Handling Technology Group, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance

So Maruyama (ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Domenico Marzullo (Department of Industrial Engineering, CREATE - University of Naples Federico II, P.le Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.009 The DTT device: first wall, vacuum vessel and cryostat structure

Domenico Marzullo (Department of Industrial Engineering (DII), CREATE Consortium/University of Naples Federico II, Piazzale Tecchio 80 – 80125 Napoli, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Domenico Marzullo (Department of Industrial Engineering (DII), Create Consortium/University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Domenico Marzullo (Department of Industrial Engineering, CREATE/University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy)

Co-author in P3.132 Systems engineering approach for pre-conceptual design of DEMO divertor cassette

Elisabet Mas de les Valls (Department of Physics, UPC-BarcelonaTech, Barcelona, Spain)

Co-author in P2.164 Liquid metal heat and mass transfer coefficients in vertical ducts with flow channel inserts

Avelino Mas Sanchez (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Avelino Mas Sanchez (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Avelino Mas Sanchez (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Kei Masaki (Department of Tokamak System Technology, Japan Atomic Energy Agency, Mukouyama Naka-shi IBARAKI, Japan)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Kei Masaki (JAEA, Ibaraki 311-0193, Japan)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Harish Masand (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Harish Masand (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Shimada Masashi (Idaho National Laboratory, Idaho, Falls, ID, United States)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Jeremy Mascarade (CEA Marcoule, Bagnols sur Cèze, France)

Co-author in P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics

Antonio Masiello (Fusion for Energy, C/ Joseph Pla 2, 08019 Barcelona, Spain)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Mick Mason (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Suguru Masuzaki (Department of Helical Plasma Research, National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Jiri Matejicek (Department of Materials Engineering, Institute of Plasma Physics, Praha, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Jiri Matejicek (Institute of Plasma Physics, Department of Materials Engineering, 18200 Prague, Czech Republic)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Jiri Matejicek (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Rodrigo Mateus (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies

Shotaro Matsuda (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Makoto Matsukawa (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Japan)

Co-author in P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA

Makoto Matsukawa (JT-60 Power Supply and Control Group, Japan Atomic Energy Agency (JAEA), Naka, Japan)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Makoto Matsukawa (Naka Fusion Institute, JAEA, Mukouyama, Naka-si, Ibaraki-ken, Japan)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Yoshihito Matsumura (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Co-author in P4.118 Retention and transmission properties of deuterium in tungsuten by the divertor simulator TPD-Sheet IV

Go Matsunaga (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Hiroto Matsuura (Radiation Research Center, Osaka Prefecture University, Osaka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Akinobu Matsuyama (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Akinobu Matsuyama (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Massimiliano Mattei (Ass. CREATE-ENEA, Seconda Universita’ di Napoli, Naples, Italy)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Massimiliano Mattei (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Jorg Matthes (Institute for Applied Computer Science , Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.171 Enhanced Jet Stability For The Melt-Based Production Of Lithium Orthosilicate/Metatitanate Pebbles

Guy Matthews (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

Guy Matthews (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Guy Matthews (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

G.F. Matthews (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

H.H. Kolb Matthias (Institute for Applied Materials (IAM-KWT), Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in O1A.2 Progress of R&D on advanced tritium breeders for BA activity in EU and Japan

Francesco Maviglia (Power Plant Physics & Technology Department, PMI, EUROfusion Consortium, Garching, Boltzmannstr. 2, Germany;DIETI, Consorzio CREATE, Univ. Napoli Federico II, 80125 Napoli, Italy)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

M. Mayer (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Max-Planck-Institut für Plasmaphysik, Garching D-85748, Germany)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Eduardo Mayoral (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

D. Mazed (Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 2-56126, Pisa, (PI), Italy)

Co-author in P1.140 Three-dimensional condensation regime of steam injected into water at sub-atmospheric conditions

Didier Mazon (Institut de Recherche sur la Fusion par confinement Magnétique (IRFM), Commissariat à l'énergie atomique et aux énergies alternatives (CEA), F-13108 Saint-Paul-lez-Durance, France)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Igor Mazul (D.V. Efremov Scientific Research Institute of Electrophysical Apparatus, 196641 St. Petersburg, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Igor Mazul (“Efremov Institute”, St. Petersburg, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Guido Mazzini (Nuclear Safety Research Section, Centrum výzkumu Řež s. r. o., (Research Centre Rez), Husinec-Řež, Czech Republic)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Guido Mazzini (CVRez, Hlavní 130, 250 68 Husinec – Řež, Czech Republic)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Giuseppe Mazzitelli (Consorzio CREATE & Seconda Università di Napoli, DIII, , Aversa, Italy)

Co-author in P2.010 The DTT device: general layout

Giuseppe Mazzitelli (Unità Tecnica Fusione, C.R. ENEA Frascati, Via E. Fermi 45, Frascati, Roma, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Giuseppe Mazzitelli (ENEA, RC Frascati, Frascati, Italy)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Francesco Mazzocchi (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Giuseppe Mazzone (Unità Tecnica Fusione- ENEA C.R. Frascati, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P1.119 Analysis of steady state thermal-hydraulic behaviour of the DEMO divertor cassette body cooling circuit

Giuseppe Mazzone (Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P3.132 Systems engineering approach for pre-conceptual design of DEMO divertor cassette

Giuseppe Mazzone (Fusion, Enea, Frascati, Italy)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Giuseppe Mazzone (ENEA C.R. Frascati, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P1.120 Thermal-hydraulic behaviour of the DEMO divertor plasma facing components cooling circuit

Giuseppe Mazzone (Unità Tecnica Fusione, ENEA-Frascati, Frascati, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Giuseppe Mazzone (ENEA C. R. Frascati Dipartimento FSN, Frascati, Italy)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Roy McAdams (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Roy McAdams (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Paul McCullen (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Adrian McFarland (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Dean McGinnis (Oak Ridge National Laboratory, Oak Ridge, TN 37831, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Dean McGinnis (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

S. McIntosh (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Simon McIntosh (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Dominic McLaughlin (Culham Centre for Fusion Energy (CCFE), Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P2.195 Dynamic modelling of a water-cooled blanket and energy storage options for a pulsed DEMO

A.G. McLean (Lawrence Livermore National Laboratory, Livermore, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

A. McLean (Lawrence Livermore National Laboratory, Livermore, California, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

S. A. Medley (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Mercedes Medrano (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Mercedes Medrano (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

K. Mehta (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Andreas Meier (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Andreas Meier (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Gerd Meisl (Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Hans Meister (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Hans Meister (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.081 Pressure gauge filament for neutral gas density measurement using alternating current as source power

Hans Meister (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Hans Meister (Max Planck Institut für Plasmaphysik, Garching. Boltzmannstr. 2, Germany)

Co-author in P1.057 Real-time calibration parameter compensation of metal resistive bolometers operating in a thermal varying environment

Hans Meister (ITER Technology & Diagnostics, Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras

Steve Meitner (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Tomas Melichar (Research Centre Rez, Hlavní 130, 250 68, Husinec-Řež, Czech Republic;Czech Technical University in Prague, Zikova 1903/4, 166 36, Prague 6, Czech Republic)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

Tomas Melichar (Research Centre Rez, Hlavní 130, CZ - 250 68 Husinec-Řež, Czech Republic)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Tomas Melichar (Centrum výzkumu Řež, Hlavní 130, 250 68 Husinec-Řež, Czech Republic)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Tibor Melisek (Institute of Electrical Engineering, Slovak Academy of Sciences, Dúbravská cesta 9, SK-841 04 Bratislava, Slovakia)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

Daniel Mellein (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Jonathan E. Menard (Princeton Plasma Physics Laboratory, 100 Stellarator Road Princeton, NJ 08540, United States)

Co-author in P3.042 Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade

Boris Mendelevitch (Max-Planck-Institut für Plasmaphysik, Garching b. München, Germany)

Co-author in P2.124 Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X

Boris Mendelevitch (Max-Planck-Institut für Plasmaphysik, Garching bei Muenchen, Germany)

Co-author in P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event

Boris Mendelevitch (Max-Planck_Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Luis Meneses (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Zi Meng (Institute of Nuclear Energy Safety Technology (INEST), Hefei, Anhui, China)

Co-author in P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field

V. Menon (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Laurent Mercadier (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Antoine Merle (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Brad Merrill (Fusion Safety Program, Idaho National Laboratory, Idaho Falls, United States)

Co-author in P1.151 An equation of state for lead lithium eutectic

Brad Merrill (Idaho National Laboratory, P.O. Box 1625 Idaho Falls, ID, USA, United States)

Co-author in O4C.3 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB and HCLL TBS accident analyses

Philippe Mertens (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany)

Co-author in P4.078 Experimental and numerical studies of the shutter dynamics for the ITER core CXRS diagnostic

Philippe Mertens (Institute of Energy and Climate Research , Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria

Vitus Mertens (Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Philippe Mertens (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Philippe Mertens (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Philippe Mertens (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Merlijn Mertens (Gent University, St. Pietersnieuwstraat 33, 9000 Gent, Belgium)

Co-author in P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK

Andre Messiaen (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Andre Messiaen (Laboratory for Plasma Physics, Royal Military Academy LPP-ERM/KMS, B-1000 Bruxelles, Belgium)

Co-author in O5B.4 Multi-section Traveling Wave Antenna for heating of large machines as DEMO

Andre Messiaen (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

A. Messiaen (LPP-ERM/KMS, Brussels, Belgium)

Co-author in P3.033 ICRF system efficency

R. Daniel Mestre (Institute of Movement Sciences, Aix-Marseille University, CNRS, Marseille, France)

Co-author in P4.137 Operators' accessibility studies using virtual reality

Botond Meszaros (PPPT, PMU, Eurofusion, Boltzmannstrasse 2, 85748 Garching, Germany)

Co-author in P2.140 Thermal radiation analysis of DEMO tokamak

Aron Metz (Research Instruments GmbH, Friedrich-Ebert Str. 1, 51429 Bergisch Gladbach, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Xuan-Mi Meyer (Laboratoire de Génie Chimique , INPT, Toulouse, France;Laboratoire de Génie Chimique , CNRS, Toulouse, France)

Co-author in P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics

Uwe Meyer (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

Olivier Meyer (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

U. Meyer (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Nicolas Meynet (PSN-RES/SAG/B2EGR, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), 92262 Fontenay-aux-Roses, France)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

S. Mianowski (Institute of Plasma Physics and Laser Microfusion, Narodowe Centrum Badan Jadrowych,, 05-400 Otwock- Swierk, Poland)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Slawomir Mianowski (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

S. Mianowski (Institute of Plasma Physics and Laser Microfusion, Narodowe Centrum Badan Jadrowych, 05-400 Otwock-Swierk, Poland)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Gioacchino Micciche (C.R. Brasimone, ENEA, 40032 Camugnano (BO), Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Gioacchino Micciche (FSN-ING-PAN, ENEA Brasimone, Camugnano (BO), Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Frederic Michel (Broader Fusion Development, F4E, Garching, Germany;INAC, CEA, 17 rue des Martyrs, France)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Daniele Micheletti (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Daniele Micheletti (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Jerzy Mietelski (Department of Nuclear Physical Chemistry, Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN), Krakow, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

J.W. Mietelski (Institute of Nuclear Physics, Polish Academy of Sciences, PL-31-342 Krakow, Poland)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Silvio Migliori (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Silvio Migliori (ENEA C.R. Frascati, via Enrico Fermi, 45 Frascati (Rome), Italy)

Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

Francisco Miguel (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Dmitry Mikhaluk (JSC "CADFEM CIS", 15/3-Kondratievskiy pr. #322, Saint Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Sergey Miklyaev (Institution "Project Center ITER", Sq. Academician Kurchatov, 1, bld.3, Moscow, 196641, Russia, Russian Federation)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

D. Milanesio (Politecnico de Torino, Torino, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Daniele Milanesio (Dipartimento Elettronica, Politecnico di Torino, Torino, Italy)

Co-author in P2.007 The DTT device: systems for heating

Francesco Milani (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France, France)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Francesco Milani (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Fulvio Militello (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Charles Millot (ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Alberto Milocco (University of Milano Bicocca, Piazza della Scienza 3, 20126 Milano, Italy)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

A. Milocco (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, UK, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Markus Milwich (Institut für Textil- und Verfahrenstechnik, Körschtalstraße 26, 73770 Denkendorf, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Kyung-Mi Min (TBM Technology Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process

Kyung-Mi Min (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Simone Minucci (University of Naples Federico II, Naples, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Francesco Mirizzi (Consorzio CREATE, via Claudio 21, I-80125 Napoli, Italy)

Co-author in P2.007 The DTT device: systems for heating

Vicente Mirones (National Fusion Laboratory, CIEMAT, MADRID, Spain)

Co-author in P2.092 Metrology of an additively manufactured coil frame for stellarators

Jyotishankar Mishra (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Jyoti Shankar Mishra (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Marc Missirlian (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

M. Missirlian (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation
Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Marc Missirlian (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Marc Missirlian (CEA, Saint Paul Lez Durance, France)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Marc Missirlian (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Chiara Mistrangelo (Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.168 Influence of modifications of HCLL blanket design on MHD pressure losses
Co-author in P2.151 MHD flow and heat transfer in model geometries for WCLL blankets

Osamu Mitarai (Tokai University, Kumamoto, 862-8652, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Osamu Mitarai (Kumamoto Liberal Arts Education Center, Tokai University, Kumamoto, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

N. Mitchell (Magnet Division, ITER Organization, Saint-Paul-lès-Durance, France)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

N. Mitchell (on behalf of the ITER Central Team, Domestic Agency and Supplier Magnet Groups, France)

Co-author in I3.1 The ITER Magnet System: Configuration and Construction Status

John Mitchell (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Neil Mitchell (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Dmitry Mitin (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Toshiyuki Mito (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Raphael Mitteau (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Mitsutaka Miyamoto (Department of Materials Science, Shimane University, 1060 Nishi-Kawatsu, Matsue, Shimane, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Junichi Miyazawa (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Takeshi MIyazawa (Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan;Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.175 Assessment of F82H development status toward DEMO with respect to the existing design code

Takeshi Miyazawa (JAEA, Rokkasho, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H

Takeshi Miyazawa (Japan Atomic Energy Agency, Rokkssho, Japan)

Co-author in P1.176 Effect of irradiation hardening on deformation behavior of blanket structures fabricated by F82H

Yuya Miyoshi (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Jumpei Mochizuki (Graduate School of Integrated Science and Technology, Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings

Jumpei Mochizuki (Graduate School of Integrated Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Jumpei Mochizuki (Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles

Victor Modestov (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Victor Modestov (Mechanics and Control, Peter the Great St.Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Victor Modestov (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Charles Moeller (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

C. Moeller (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Andreas Mohr (Ruhr-Universität Bochum, Chair of Materials Technology, 44780 Bochum, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Joaquin Molla (Laboratorio Nacional de Fusion, CIEMAT, Avda. Complutense 40, CP: 28040, Madrid, Spain)

Co-author in P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES

Patrick Mollard (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Soren Moller (Institut für Energie und Klimaforschung/Plasmaphysik (IEK-4), Forschungszentrum Jülich (TEC Partner), D-52435 Jülich, Germany)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Igor Monakhov (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Victor Moncada (ThermaDIAG, 100 Impasse des Houllières, ZA Le Pontet, F-13590 Meyreuil, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Miguel Angel Monge (Departamento de Física, Universidad Carlos III, Avda de la Universidad, 30 28911-Leganés, Spain)

Co-author in P1.101 Characterization of the particles dispersion in W-Ti and W-V alloys by SANS

Miguel Angel Monge Alcazar (Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain;Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Thomas Monnich (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Chiara Monti (ENEA CR Frascati, FRASCATI (ROME), Italy)

Co-author in P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak

Don Montierth (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Michael Moody (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

Joonoh Moon (Korea Institute of Materials Science (KIMS), Changwon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

Jaehwan Moon (Design, SFA, Dunpo-ri, Dunpo-myeon, Asan-si, Chungcheongnam-do, South Korea)

Co-author in P1.002 Design and Structural Analysis of the Upending Tool
Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

Kyung-Mo Moon (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Kyung-Mo Moon (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Se Yeon Moon (Chonbuk National University, Jeonju, South Korea)

Co-author in P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component

Joonoh Moon (Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Joonoh Moon (Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Robin Mooney (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Jaime Mora (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Juan Carlos Mora (CIEMAT, Avenida Complutense, 40, 28040 Madrid, Spain)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Adan Mora (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

P. Moreau (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation

Philippe Moreau (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Phillipe Moreau (Association CEA pour la Fusion Contrôlée, CEA Cadarache - 13108 St Paul les Durance, France)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Philippe Moreau (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Philippe Moreau (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Carlos Moreno (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

Carlos Moreno (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Carlos Moreno (National Fusion Laboratory, CIEMAT, Avda. Complutesnse 40, Spain)

Co-author in P3.146 H isotope thermo-diffusion in structural materials

C. Moreno (CIEMAT, Madrid, Spain)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Modesto Moressa (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Modesto Moressa (Consorzio RFX, Padova, Italy)

Co-author in P1.023 Implementation of the SPIDER Central Interlock

L. W. Morgan (Nuclear Technology Department, UKAEA, Abingdon, United Kingdom;Nuclear Technology Department, UKAEA, Abingdon, United Kingdom)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Jyunya Mori (College of Engineering, Ibaraki University, Hitachi, Ibaraki, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Kazuyuki Mori (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Junki Morimoto (The Graduate University for Advanced Studies, 322-6 Oroshi-cho,Toki, Gofu, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Alexandre Morin (DEN, DM2S , CEA Saclay, Gif-sur-Yvette, France)

Co-author in P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules

Alexandro Morin (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Junya Morioka (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.178 Study on suppression of surface fluctuation of liquid Li jet by magnetic field

Yoshiaki Morisada (Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 5670047, Japan)

Co-author in P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy

Yoshiaki Morisada (Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Shinichi Moriyama (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Shinichi Moriyama (Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Alessandro Moro (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

F. Moro (ENEA, Dipartimento Fusione e tecnologie per la Sicurezza Nucleare, Via E. Fermi 45, 00044 Frascati, Italy)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Fabio Moro (UTFUS-TECN, ENEA, Via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Fabio Moro (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Fabio Moro (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati, Italy)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Fabio Moro (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Alejandro Morono (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Alejandro Morono (LNF-DTF, CIEMAT, Madrid, Spain)

Co-author in P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures

Alejandro Morono (National Fusion Laboratory, CIEMAT, Avenida Complutense 40, E-28040 Madrid, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Alejandro Morono (National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain;National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain)

Co-author in P3.172 Displacement damage effect on the thermal stability of deuterium in SiC

Alejandro Morono (National Fusion Laboratory, CIEMAT, Avda. Complutesnse 40, Spain)

Co-author in P3.146 H isotope thermo-diffusion in structural materials

Anton Morozov (NRC “Kurchatov institute”, Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

James Morris (Power Plant Technology Group, CCFE, Abingdon, United Kingdom)

Co-author in P2.194 Time-dependent power requirements for pulsed fusion reactors

William Morris (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

James Morris (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

William Morris (CCFE, Abingdon, United Kingdom)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Marigrazia Moscardini (Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.171 Discrete element modelling of ellipsoidal particles for fusion applications

Dmitry Moseev (Max-Planck-Institut für Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, D-17489 Greifswald, Germany)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Renny Moss (TISICS Ltd, 22 Invincible Road, Farnborough, United Kingdom)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor

Fernando Mota (Laboratorio Nacional de Fusión por Confinamiento Magnético , CIEMAT, Madrid, Spain)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Fernando Mota (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Fernando Mota (Laboratorio Nacional de Fusion, CIEMAT, Avda. Complutense 40, CP: 28040, Madrid, Spain)

Co-author in P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES

Christian Moura (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

R.A. Moyer (Center for Energy Research, University of California, San Diego, La Jolla, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Miran Mozetic (Jožef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Yuri Mozkin (RTSoft Tools and Automation Systems, Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Rocco Mozzillo (CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Rocco Mozzillo (Industrial Engineering, CREATE - UNIVERSITY OF NAPLES FEDERICO II, p.le Tecchio 80 Napoli, Italy)

Co-author in P3.135 Rationale and Method for design of DEMO WCLL Breeding Blanket Poloidal Segmentation

Rocco Mozzillo (Department of Industrial Engineering, CREATE - University of Naples Federico II, P.le Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.009 The DTT device: first wall, vacuum vessel and cryostat structure

Lukas Muehle (Ampegon, Spinnereistrasse 5, CH-5300 Turgi, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Alexander von Mueller (Max-Planck-Institut für Plasmaphysik, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Giampiero Mugnaini (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

David Muir (EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, United Kingdom)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

David Muir (UKAEA-CCFE, Abingdon, United Kingdom)

Co-author in P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling

Alex Muir (RACE, UKAEA, Culham, United Kingdom)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

David Muir (Theory and Modelling, CCFE, Abingdon, United Kingdom)

Co-author in P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE

Keisuke Mukai (IAM-KWT, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Build 575 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.149 Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design

A. Mukherjee (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

J.K Mukherjee (Electronics and Instrumentation Services Division, Bhabha Atomic Research Centre, Trombay, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

Samiran Mukherjee (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Aparajita Mukherjee (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Aparajita Mukherjee (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Samiran Mukherjee (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Eugene Mukhin (Diagnostics, ITER Russia, Pl. Akademika Kurchatova, 1, Moscow, Russian Federation)

Co-author in P3.054 ITER Diagnostic Shutters

Eugene Mukhin (Ioffe Institute, St.Petersburg, 194021, 26 Polytechnicheskaya St., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Evgenii Mukhin (Ioffe Institute, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Eugene Mukhin (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Faina Muktepavela (Institute of Solid State Physics, University of Latvia, 32 Miera iela, Salaspils, Latvia)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Alejandro Munoz (ITEP, Karlsruhe Institute für Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK

Angel Munoz (Departamento de Física, Universidad Carlos III, Avda de la Universidad, 30 28911-Leganés, Spain)

Co-author in P1.101 Characterization of the particles dispersion in W-Ti and W-V alloys by SANS

Angel Munoz (Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Haruyuki Murakami (Tokamak System Technology, Japan Atomic Energy Agency, Naka Ibaraki, Japan)

Co-author in P2.084 Design of JT-60SA cryodistribution

Haruyuki Murakami (QST, Naka, Naka, Ibaraki 311-0193, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Andrea Murari (Consorzio RFX , Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Andrea Murari (Culham Centre for Fusion Energy, Culham, United Kingdom)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Andrea Murari (JET, EUROfusion Consortium, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Julian Murgatoryd (Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford, WA16 8QZ, United Kingdom)

Co-author in P2.201 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB TBS accident analyses

Julian Murgatroyd (Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford, WA16 8QZ, United Kingdom)

Co-author in O4C.3 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB and HCLL TBS accident analyses

Yukihiro Murodate (Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Takeo Muroga (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Takeo Muroga (National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Takeo Muroga (National Institute for Fusion Science, Toki, Gifu 509-5292, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Takeo Muroga (National Institute for Fusion Science, Toki City, Japan)

Co-author in P2.184 Development of Oxide dispersion strengthened-Copper using MA-HIP process

Takeo Muroga (Department of Helical Plasma Research, National Institute for Fusion Science, Gifu, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

C. Murphy (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Chris J. Murphy (General Atomics, P.O. Box 85608, San Diego, California 92186-5608, United States)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

Radomir Musalek (Tokamak, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00 Praha 8, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

Luigi Muzzi (ENEA, Frascati, Italy;ICAS, Frascati, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO

Luigi Muzzi (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Luigi Muzzi (Superconductivity Laboratory, ENEA, 00044 Frascati, Italy)

Co-author in P1.086 Cost Estimate for the Toroidal Field Coil System of DEMO

Y.S. Na (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Yoshihiro Nabara (Superconducting Magnets, Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Gabor Nadasi (Wigner Research Centre for Plasmaphysics, Budapest, Hungary)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Gabor Nadasi (Plasma Physics, Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras

Gabor Nadasi (Wigner Research Centre for Physics, Konkoly-Thege Miklós út 29-33, 1121 Budapest, Hungary)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Kouji Nadehara (Taiyo Nippon Sanso Corporation, 6-2 kojima, Kawasaki, Kanagawa, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Ken-Ichi Nagaoka (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Takuya Nagasaka (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Takuya Nagasaka (Fusion System, National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan;SOKENDAI (the Graduate University for Advanced Studies), 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Takuya Nagasaka (National Institute for Fusion Science, Toki, Gifu 509-5292, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Yoshihiko Nagashima (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Yoshihiko Nagashima (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Takahiro Nagata (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Takahiro Nagata (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Michael Nagel (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Michael Nagel (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

Michael Nagel (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

A. Nagy (Princeton Plasma Physics Laboratory, PO Box 451 Princeton, New Jersey, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Domonkos Ferenc Nagy (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Daniel Nagy (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Jonathan Naish (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Jonathan Naish (Technology, UKAEA, Oxfordshire, United Kingdom)

Co-author in P4.199 Minimising Operator Neutron Dose During JET Shutdown using Virtual Reality

Richard Naish (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

J. Naish (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

J. Naish (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

J. Naish (CCFE Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

R. Naish (CCFE Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Masaru Nakajima (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Masaru Nakamichi (Department of Blanket Systems Research,, Japan Atomic Energy Agency, Rokkasho, Kamikita,, Japan)

Co-author in P1.161 Thermal analyses of beryllide pebbles in water vapor atmosphere as advanced neutron multipliers

Masaru Nakamichi (Sector of Fusion Research and Development, Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.166 Development of surface modification of beryllide pebbles with no-hydrogen generation reaction with steam

Hirofumi Nakamura (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Kazuo Nakamura (RIAM, Kyushu Univ., Kasuga, Fukuoka, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Kazuo Nakamura (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Kazuo Nakamura (Nuclear Fusion Dynamics, RIAM, Kyushu University, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Tomohide Nakano (Japan Atomic Energy Agency, Mukouyama, Naka City, Ibaraki, 311-0193 , Japan)

Co-author in P2.019 Conceptual design of the JT-60SA pellet launching system

Haruhisa Nakano (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Hisatoshi Nakashima (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Hisatoshi Nakashima (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Toshiya Nakata (Division of Industrial Innovation Sciences, Graduate School of Natural Science & Technology, Okayama University, Okayama, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Kyoungo Nam (Tokamak Technology, National Fusion Research Institute(NFRI), Daejeon, South Korea)

Co-author in P1.002 Design and Structural Analysis of the Upending Tool

Kwanwoo Nam (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Kwanwoo Nam (NFRI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Yong Un Nam (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Kyoungo Nam (Tokamak Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

Won Namkung (POSTECH, Pohang, Gyeongbuk, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Won Namkung (Pohang Accelerator Laboratory (PAL), Pohang, Gyeongbuk, South Korea)

Co-author in P2.033 Mode Converters for Low-loss Transmission-line of KSTAR LHCD system

Irakli Nanobashvili (Andronikashvili Institute of Physics, Tamarashvili St. 6, 0186 Tbilisi, Georgia;Ilia State University, Kakutsa Cholokashvili Ave. 3/5, 0162 Tbilisi, Georgia)

Co-author in P1.018 Properties of plasma injected in open magnetic trap from independent UHF source

Sulkhan Nanobashvili (Andronikashvili Institute of Physics, Tamarashvili St. 6, 0186 Tbilisi, Georgia)

Co-author in P1.018 Properties of plasma injected in open magnetic trap from independent UHF source

Sulkhan Nanobashvili (Andronikashvili Institute of Physics, Tamarashvili St. 6, 0177 Tbilisi, Georgia)

Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

Yoshida Naoaki (Research Institute for Applied Mechanics, Kyushu University, 6-1, Kasugakoen, Kasuga, Fukuoka, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Eugenio Nappi (INFN, Bari, Italy)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Eric Nardon (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Eric Nardon (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

S. Naris (Hellenic Association - University of Thessaly, Volos, Greece)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Suzuki Narumi (Tokai university, 4-1-1 Kitakaname, Hiratsuka-shi, Kanagawa 259-1292, Japan)

Co-author in P4.189 Monitoring of oxide layer structures in Pb and Pb-Li alloy by electrochemical impedance spectroscopy

Kyohei Natsume (Tokamak System Technology, Japan Atomic Energy Agency, Naka Ibaraki, Japan)

Co-author in P2.084 Design of JT-60SA cryodistribution

Kyohei Natsume (Tokamak System Technology, Japan Atomic Energy Agency, 801-1 Muko-yama, Naka-shi, Ibaraki-ken,, Japan)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Dirk Naujoks (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

Dirk Naujoks (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Volker Naulin (DTU Physics, Technical University of Denmark, Fysikvej, building 311 2800 Kgs. Lyngby, Denmark)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

V. Naulin (Department of Physics, Technical University of Denmark, Lyngby, Denmark)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Pratik Nayak (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Pratik Nayak (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Graham Naylor (CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

NBTF Team and the contributing Staff of IO; F4E; JADA and INDA (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy;ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France;Fusion For Energy, C/ Josep Pla 2, 08019 Barcelona, Spain;Japan Atomic Energy Agency, 801-1 Mukoyama, Naka-shi, Ibaraki-ken 311-0193, Japan;Institute for Plasma Research, Nr. Indira Bridge, Bhat Village, Gandhinagar, Gujarat 382428, India)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Igor Nedzelskiy (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001, Lisbon, Portugal)

Co-author in P4.065 90 degrees cylindrical energy analyzer for the plasma potential fluctuations measurements on the tokamak ISTTOK

Llorenc Negre (Indra Sistemas S.A, 28108 Alcobendas, Madrid, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Hutch Neilsion (Princeton Plasma Physics Laboratory, PO Box 451, MS-38, Princeton, NJ 08543,, United States)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

George Hutch Neilson (Princeton Plasma Physics Laboratory, PO Box 451, MS-38, Princeton, NJ 08543, United States)

Co-author in P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR

Hutch Neilson (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Jiri Nemecek (Czech Technical University in Prague, Faculty of Civil Engineering, Thakurova 7, 166 29 Prague, Czech Republic, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Alexandr Nemov (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Aleksandr Nemov (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Grigorij Nemtsev (PC ITER, Moscow, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Carlo Neri (ENEA CR Frascati, FRASCATI (ROME), Italy)

Co-author in P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak

Andre Neto (Fusion for Energy, 08019 Barcelona, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Rudolf Neu (Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Rudolf Neu (Max-Planck-Institute for Plasmaphysics, Garching, Germany;Technical University Munich, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Rudi Neu (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Rudolf Neu (Max-Planck-Institut für Plasmaphysik, Max-Planck-Institut für Plasmaphysik, Garching, Germany;Technische Universität München,, Boltzmannstrasse 15, 85748 Garching, Germany, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Rudolf Neu (Plasmarand und Wand, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany;Fakultät für Maschinenwesen, Technische Universität München, Boltzmannstr.15, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

Rudolf Neu (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany;Technische Universität München, Boltzmannstraße 15, 85748 Garching, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Rudolf Neu (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Rudolf Neu (Max-Planck-Institut für Plasmaphysik (IPP), Boltzmannstrasse 2, 85748 Garching, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

R. Neu (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Max-Planck-Institut für Plasmaphysik, Garching D-85748, Germany)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Olaf Neubauer (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung - Plasmaphysik, 52425 Jülich, Germany)

Co-author in I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator

Olaf Neubauer (Forschungszentrum Jülich GmbH, IEK-4 Plasmaphysik, Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Olaf Neubauer (IEK-4 Plasmaphysik, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Olaf Neubauer (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Heiko Neuberger (KIT, Karlsruhe, Germany)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Heiko Neuberger (Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe, Germany)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Heiko Neuberger (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Heiko Neuberger (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Ulrich Neuner (Max-Planck Institute of Plasma Physics, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Ulrich Neuner (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator

Vladislav Neverov (NRC “Kurchatov institute”, Moscow, Russian Federation)

Co-author in P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER

Jean-Cristophe Neviere (ITER Organization, Cadarache, France)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Mark Newman (Power and Active Operations, UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in O3B.1 The JET Materials Detritiation Facility for reducing radioactive waste liabilities

Tran-Thanh Ngo (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Muyi Ni (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.199 Environmental safety assessment for fusion reactor due to gaseous tritium release

Dirk Nicolai (Forschungszentrum Jülich GmbH, IEK-4 Plasmaphysik, Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Dirk Nicolai (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Sylvie Nicollet (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Sylvie Nicollet (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Sylvie Nicollet (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Alina Niculescu (National Institute for Cryogenics and Isotopes Technologies - ICSI, Rm. Valcea, Romania)

Miao Nie (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China, Hefei, Anhui, China)

Co-author in P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System

Baojie Nie (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.199 Environmental safety assessment for fusion reactor due to gaseous tritium release

Xingchen Nie (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P3.204 A novel approach to improve the calculation efficiency of the GVR method

A.H. Nielsen (Department of Physics, Technical University of Denmark, Lyngby, Denmark)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

G. Nikolaev (Beryllium Department, A.A. Bochvar High Technology Research Institute of Inorganic Materials (JSC VNIINM), Rogova St. 5a, Moscow, Russian Federation)

Co-author in P2.173 Progress in development and qualification of beryllium for ITER blanket first wall in Russia

Vladica Nikolic (Erich Schmid Institute of Materials Science of the Austrian Academy of Sciences, 8700 Leoben, Austria)

Co-author in P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process

Hiren D. Nimavat (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ryo Nishikiori (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Takeo Nishitani (National Institute for Fusion Science, Toki, Gifu, Japan)

Co-author in P3.071 Monte Carlo simulation of the neutron measurement for the Large Helical Device deuterium experiments

Koichi Nishiyama (IFMIF/EVEDA Project Team, National Instiutes for Quantum and Radiologocal Science and Technology, Kmikita-gun Aomori Perfecture, Japan)

Co-author in P2.208 Evolution of calorimetry methodology for beam current measurement of the LIPAc

Craig Noble (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Minoru Nobutoki (Taiyo Nippon Sanso Corporation, 6-2 kojima, Kawasaki, Kanagawa, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

M. Nocente (Instituto di Fisica del Plasma "Piero Caldirola«, Consiglio Nazionale delle Ricerche, and Dipartimento di Fisica “G. Occhialini”, Università degli studi di Milano Bicocca, Milano, Italy)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Massimo Nocente (Physics, University of Milano-Bicocca, Milano, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

M. Nocente (Instituto di Fisica del Plasma “Piero Caldirola”, Milano, Italy)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Massimo Nocente (Dipartamento di Física "G. Occhialini", Universitá degli Studi di Milano-Bicocca, Milano, Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Massimo Nocente (Dipartimento di Fisica “G. Occhialini”, Università degli Studi di Milano-Bicocca, Milano, Italy;Istituto di Fisica del Plasma “P. Caldirola”, CNR, Milano, Italy)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Riccardo Nocentini (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Riccardo Nocentini (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Shuhei Nogami (Department of Quantum Science and Energy Engineering, Tohoku University, Sendai 980-8579, Japan)

Co-author in P3.183 Fatigue life of tungsten materials strengthened by various methods

Shuhei Nogami (Tohoku University, Aoba-ku, Sendai, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Yuto Noguchi (Fusion Research and Development Directorate, ITER Project Unit, Remote Handling Technology Group, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance

Yuto Noguchi (Department of ITER Project, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.128 Recovery from failures of ITER Blanket Remote Handling System

Mizuki Noguchi (Advanced Energy Engineering Science, Kyushu University, 6-1, Kasugakoen, Kasuga-shi, Fokuoka, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Yuto Noguchi (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Chang Hyun Noh (NFRI, Daejeon, South Korea)

Co-author in P1.132 Reliability analysis of the ITER LCTS double plate support

Chang Hyun Noh (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Oriol Nomen (IREC, Barcelona, Spain)

Co-author in P3.008 Design, integration and manufacturing of the MEBT and DPlate support tables for IFMIF LIPAc

Kazuhiro Nomoto (Mitsubishi Electric Co., Kobe, Hyogo 652-8555, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Marko Nonhoff (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

Co-author in P4.067 Improving accuracy of Penning gauge spectroscopy for the determination of hydrogen isotope H/D ratios

Paul Noonan (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Prachai Norajitra (KIT, Karlsruhe, Germany)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Prachai Norajitra (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Sixten Norrman (VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere, Finland)

Co-author in P2.195 Dynamic modelling of a water-cooled blanket and energy storage options for a pulsed DEMO

J.-M. Noterdaeme (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany;Ghent University, Applied Physics Department, B-7000 Gent, Belgium)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Jean-Marie Noterdaeme (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Jean-Marie Noterdaeme (Applied Physics Department, Ghent University, B-9000 Gent, Belgium;Max Planck Institute for Plasma Physics, D-85748 Garching, Germany)

Co-author in P3.050 Physical characterization of the JET operational space regarding EMLs by means of discriminant analysis

Jean-Marie Noterdaeme (Tokamak Scenario Development Department, Max Planck Institute for Plasma Physics, D-85748, Garching Bei Munchen, Germany;Applied Physics Department, Ghent University, B-9000 Gent, Belgium)

Co-author in P4.025 Integrating a distributed antenna in DEMO: requirements and challenges

Jean-Marie Noterdaeme (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Jean-Marie Noterdaeme (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany;Applied Physics Department, Ghent University, B-9000 Gent, Belgium)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Jean-Marie Noterdaeme (Max Planck Institute for Plasma Physics, Garching, Germany;Applied Physics Department, Ghent University, Ghent, Belgium)

Co-author in P3.033 ICRF system efficency

Gennadiy Notkin (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Hiroyuki Noto (National Institute for Fusion Science, Toki City, Japan)

Co-author in P2.184 Development of Oxide dispersion strengthened-Copper using MA-HIP process

Remy Nouailletas (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Remy Nouailletas (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Remy Nouailletas (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Remy Nouailletas (IRFM, CEA Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.044 Plasma internal profile control using IDA-PBC: Application to TCV

Sasa Novak (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia;Jožef Stefan International Postgraduate School, LJubljana, Slovenia)

Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Sasa Novak Krmpotic (Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia;Jožef Stefan International Postgraduate School, Jamova cesta 39, Ljubljana, Slovenia)

Co-author in P2.174 SiC-fibre reinforced tungsten-based composites for divertor

Luca Novello (Broader Fusion Development Department,, Fusion for Energy (F4E), Garching, Germany;Broader Fusion Development Department,, Fusion for Energy (F4E), Garching, Germany)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Luca Novello (Broader Development of Fusion Dept., Fusion for Energy, Garching, Germany)

Co-author in P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA

Luca Novello (Broader Fusion Development Department, F4E, Garching, Germany)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Alexey Novokshenov (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Silvana Nowak (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Silvana Nowak (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Takashi Nozawa (Japan Atomic Enegy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.177 Characterization of F82H HIP joints by acoustic emission

Takashi Nozawa (Japan Atomic　Energy　Agency, Rokkasho-mura, Japan)

Co-author in P4.111 Feasibility study of fabrication of large scale mock-up and strength evaluation of HIP joint

Takashi Nozawa (Japan Agency for Quantum and Radiological Science and Technology, 2-166 Omotedate, Obuchi, Rokkasho, Kamikita, Aomori 039-3212, Japan)

Co-author in P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow

I. Nunes (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, FOM Institute DIFFER – Dutch Institute for Fundamental Energy Research, Eindhoven, Netherlands)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Francois Nunio (IRFU, CEA Saclay, 91191, Gif-sur-Yvette, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Marc Nusbaum (General Electric, 90018 Belfort, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

R.E. Nygren (Sandia National Laboratories, Albuquerque, NM, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Richard E. Nygren (Sandia National Laboratories, Albuquerque, New Mexico 87185, United States)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

R. O'Neill (General Atomics MFE, san diego, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Martin Oberkofler (Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Barbara Obryk (Institute of Nuclear Physics Polish Academy of Sciences, ul. Radzikowskiego 152, 31-342 Krakow, Poland)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Denis Obukhov (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Kentaro Ochiai (Japan Atomic Energy Agency, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS

Ryouke Ochiai (Institute of Advanced Energy, Kyoto University, Uji, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H

Kentaro Ochiai (Japan Atomic Energy Agency, Rokkasyo, Aomori, Japan)

Co-author in P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS

S. Ochoa (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

R. Ochoukov (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Yasuhisa Oda (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Yasushi Oda (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Yasuhisa Oda (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Yuki Oda (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

G. Robert Odette (University of California, Santa Barbara, Santa Barbara, CA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Guido Offermanns (ZEA-1, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Guido Offermanns (Central Institute for Engineering, Electronics and Analytics/Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Francisco Ogando (Departamento de Ingenieria Energetica, UNED, 28040 Madrid, Spain)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

F. Ogando (Universidad Nacional de Educación a Distancia (UNED, C. Juan del Rosal, 12, 28040 Madrid, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Francisco Ogando (TEC3FIR, UNED, Madrid, Spain)

Co-author in P4.185 IFMIF bean dump front shielding residual dose study with SEACAB metholodogy

Kunihiro Ogawa (National Institute for Fusion Science, Toki, Gifu, Japan;SOKENDAI (The Graduate University for Advanced Studies), 322-6 Oroshi-cho, Toki 509-5292, Japan, Japan)

Co-author in P3.071 Monte Carlo simulation of the neutron measurement for the Large Helical Device deuterium experiments

Seiya Ogawa (Course of Mechanical Engineering, Tokai University, Kanagawa, Hiratsuka, Japan)

Co-author in P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density

Seiya Ogawa (Prime Mover Engineering, School of Engineering, Tokai University, Hiratsuka, Kanagawa, Japan)

Co-author in P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization

Hidetoshi Oguro (High Field Laboratory for Superconducting Materials, Institute for Materials Research, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai, Japan)

Co-author in P1.081 Development of the bronze processed Nb3Sn multifilamentary wires using Cu-Sn-Zn ternary alloy matrix

Phil Yong Oh (Chonbuk National University, Jeonju-si, South Korea)

Co-author in P3.106 Ablation properties of plasma facing materials using thermal plasmas

Seung-Tae Oh (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.074 Spatial Distribution of Accumulated Neutron Emission in KSTAR

Soo-Ghee Oh (Center for Advanced Research in Fusion Reactor Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

Yeong-Kook Oh (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Mitsuru Ohata (Osaka University, Suita, Japan)

Co-author in P1.176 Effect of irradiation hardening on deformation behavior of blanket structures fabricated by F82H

Katsumi Ohshima (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Ryuji Ohsone (Japan Atomic Enegy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.177 Characterization of F82H HIP joints by acoustic emission

Ryuji Ohsone (Japan Atomic　Energy　Agency, Rokkasho-mura, Japan)

Co-author in P4.111 Feasibility study of fabrication of large scale mock-up and strength evaluation of HIP joint

Masayuki Ohta (Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, Japan)

Co-author in P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS

Masayuki Ohta (Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS

Toshihiro Oikawa (Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212, Japan)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Amit Ojha (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Fumito Okino (Institute of Advanced Energy, Kyoto University, Kyoto-fu, Japan)

Co-author in P2.166 Tritium and heat simultaneous non-contact recovery in vacuum

Fumito Okino (Institute of Advanced Energy, Kyoto University, Uji,Kyoto, Japan)

Co-author in P1.149 Myth of initial loading tritium : modelling DEMO fuel system in power ascension tests

Takafumi Okita (Division of Sustainable Energy and Environmental Engneering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux

Takafumi Okita (Department of Sustainable Energy and Environmental Engineering, School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

Takafumi Okita (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.178 Study on suppression of surface fluctuation of liquid Li jet by magnetic field

Takafumi Okita (Division of Sustainable Energy and Environmental Engineering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Takafumi Okita (Osaka University, Osaka, Japan)

Co-author in P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method

Takafumi Okita (Osaka University, 2-1 Yamadaoka, Suita-City, Osaka, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Takanari Okuda (Kobelco Research Institute, Inc., Kobe, Japan)

Co-author in P1.182 Effects of mechanical alloying parameters on microstructure and impact properties of ODS ferritic steels

Elena Okuneva (D.V. Efremov Scientific Research Institute of Electrophysical Apparatus, 196641 St. Petersburg, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Hiroki Okuno (RIKEN, Saitama, Japan)

Co-author in P4.178 Study on suppression of surface fluctuation of liquid Li jet by magnetic field

Eneko Olabarrieta (Mechanical Engineering, IK4-TEKNIKER, Eibar, Spain)

Co-author in P2.128 Analysis of a portable machine for post-welding operations within the vacuum vessel of ITER

Jorge Olalde (Esteyco Mechanics, Esteyco, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

Pedro Olmos (Laboratorio Nacional de Fusion, CIEMAT, MADRID, Spain)

Co-author in P3.003 Accelerometers for boiling onset detection on beam stopper of LIPAc accelerator

Sol Omolayo (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Toshimichi Omori (ITER Organization, Route de Vinon-sur-Verdon 13067 St. Paul-lez-Durance, France)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Jef Ongena (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Jozef Ongena (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Johan Oosterbeek (Eindhoven University of Technology, Eindhoven, Netherlands)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Nerea Ordas (Materials and Manufacturing, Ceit-IK4, San Sebastian, Spain)

Nerea Ordas (Materials Department, CEIT-IK4, Paseo de Manuel Lardizabal 15, E-20018 San Sebastian, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Javier Ordieres (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Ilya Orlovskiy (NRC "Kurchatov Institute", Moscow, Russian Federation;International Fusion Projects Coordinating Centre, Moscow, Russian Federation)

Co-author in P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER

Guillermo Orozco (ITED, Max-Planck Institute for Plasma Physics (IPP), Garching, Germany)

Co-author in P1.035 Characterization and performance improvement of large titanium sublimation pumps in AUG and W7-X NBI

Pedro Ortego (Neutronic Calculations, SEA (Shielding Engineering and Analysis) SL, Las Rozas-Madrid, Spain)

Co-author in P4.185 IFMIF bean dump front shielding residual dose study with SEACAB metholodogy

Masaki Osakabe (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Yu Otani (Prime Mover Engineering, School of Engineering, Tokai University, Hiratsuka, Kanagawa, Japan)

Co-author in P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization

Yu Otani (Course of Mechanical Engineering, Tokai University, Kanagawa, Hiratsuka, Japan)

Co-author in P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density

Carlos Otarola (Electromechanical Engineering, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Teppei Otsuka (Interdisciplinary Graduate School of Engineering Science, Kyushu University, 6-10-1 Hakozaki, Fukuoka, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Simon Owen (Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford, WA16 8QZ, United Kingdom)

Tom H. Owen (Remote Applications in Challenging Environments (RACE), UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in P4.138 Status and Developments of the MASCOT telemanipulator system for JET Remote Maintenance

Yasuhisa Oya (Graduate School of Integrated Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Yasuhisa Oya (Graduate School of Integrated Science and Technology, Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings

Makoto Oya (Osaka university, Osaka, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Yasuhisa Oya (College of Science, Academic Institute, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Yasuhisa Oya (Shizuoka University, 836 Ohya, Suruga-ku Shizuoka 422-8529, Japan)

Co-author in P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles

Yasuhisa Oya (College of Science, Academic Institute, Shizuoka University, 836 Ohya, Suruga-ku,Shizuoka, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Makoto Oyaidzu (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Makoto Oyaidzu (Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Kazumi Ozawa (Fusion Research and Development Directorate, Japan Atomic Energy Agency, 2-166 Oaza-Obuchi-Aza-Omotedate, Rokkasho, Kamikita-gun, Aomori 0393212, Japan)

Co-author in P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy

Kazumi Ozawa (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Ray O’Neil (General Atomics, P.O. Box 85608, San Diego, CA 92186-5608, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

D. Pace (DIII-D National Fusion Facility, General Atomics, San Diego, United States)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

D.C. Pace (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

Lee Packer (Nuclear Technology Department, UKAEA, Abingdon, United Kingdom)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

L. Packer (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Lee Packer (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

L.W. Packer (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, UK, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Ioannis Pagonakis (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Ioannis Gr. Pagonakis (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Andres Pajares (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, United States)

Co-author in P3.040 Nonlinear burn control in tokamaks using In-vessel coils

Elina Pajuste (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Sunil Pak (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

Sunil Pak (Diagnostics team, ITER Korea, ITER Korea, National Fusion Research Institute, 169-148 Gwahak-ro, Yuseong-gu, Daejeon 34133, South Korea)

Co-author in P3.054 ITER Diagnostic Shutters

Sunil Pak (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Miklos Palankai (WIGNER RCP, RMKI, PO Box 91, H-1521 Budapest, Hungary)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Miklos Palankai (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Iole Palermo (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Iole Palermo (Fusion National Laboratory, CIEMAT, Avda. Complutense, 40, 28040 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Iole Palermo (Fusion Technology Division, Ciemat, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P1.200 Radiological impact mitigation of waste coming from the European Fusion Reactor DCLL DEMO

Iole Palermo (Laboratorio Nacional de Fusion, CIEMAT, Avda. Complutense 40, CP: 28040, Madrid, Spain)

Co-author in P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES

Massimiliano Palermo (Fusion Dept., Ansaldo Nucleare S.p.A., Genova, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Iole Palermo (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

I. Palermo (Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Gwenn Pallier (Thales SESO SAS, 530, rue Frédéric Joliot 13593 Aix-en-Provence Cedex 3, France)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Raul Pampin (Fusion for Energy, Calle Josep Pla 2,Torres Diagonal Litoral B3, Spain)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Raul Pampin (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Raul Pampin (ITER, FUSION FOR ENERGY, BARCELONA, Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Yudong Pan (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Hongtao Pan (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd, China)

Co-author in P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application

Lei Pan (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Min Pan (Key Laboratory of Advanced Technology of Materials (Ministry of Education),Superconductivity and New Energy R&D Center, Southwest JiaoTong University, mail stop 165, China)

Co-author in P2.179 The study of irradiation defects structure in tungsten: stability for the self-interstitial

Hongtao Pan (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Yudong Pan (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds

Yudong Pan (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Stephanie Panayotis (ITER Organization, Route de Vinon sur Verdon, F-13067 Saint Paul lez Durance, France)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Dobromir Panayotov (ITER Department, Fusion for Energy (F4E), Torres Diagonal Litoral B3, Barcelona, E-08019, Spain)

Co-author in P2.201 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB TBS accident analyses

Dobromir Panayotov (ITER Department, Fusion for Energy (F4E), Josep Pla, 2; Torres Diagonal Litoral B3, Barcelona, E-08019, Spain)

Co-author in O4C.3 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB and HCLL TBS accident analyses

Manoj Panchal (ITER Organization, Saint-Paul-lez-Durance, France)

Co-author in P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield

Rohitkumar N. Panchal (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Paresh Panchal (Institute for plasma research, Gujarat, India)

Co-author in P4.014 Progress in Development of Pellet Injector Technology in India

Arun G. Panchal (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Pradip N. Panchal (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Paresh Panchal (Development of cryopump and pellet injector system, Institute for Plasma Research, Bhat, Gandhinagar, 382428, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Nirmal Panda (Non Ferrous Materials Technology Development Centre, Kachanbagh, Hyderabad, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Kaushal Pandya (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Darshit Pandya (LDRP, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

Bhargav Pandya (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Radomir Panek (Institute of Plasma Physics of the CAS, Prague, Czech Republic)

Co-author in P2.059 Fast infrared thermography on the COMPASS tokamak

Radomir Panek (Tokamak Department, Institute of Plasma Physics of the CAS, Za Slovankou 1782/3 182 00 Prague 8, Czech Republic)

Co-author in P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak

Radomir Panek (Insitute of Plasma Physics CAS, Za Slovankou 3, Prague, Czech Republic)

Co-author in I2.3 Design of the COMPASS Upgrade Tokamak

Radomir Panek (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Maurizio Panella (Consortium CREATE, Naples, Italy)

Co-author in P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak

Anatoly Panin (Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in P1.090 Mechanical pre-dimensioning and pre-optimization of tokamaks’ toroidal coils featuring a winding pack layout

Anatoly Panin (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany)

Co-author in P4.078 Experimental and numerical studies of the shutter dynamics for the ITER core CXRS diagnostic

Carlo Panizza (NIDEC-ASI, Milan, Italy)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Matjaz Panjan (Jožef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Francesco Paolucci (Fusion For Energy, Barcelona, Spain)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Francesco Paolucci (Fusion for Energy, Fusion For Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P1.023 Implementation of the SPIDER Central Interlock

Francesco Paolucci (Fusion For Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Yuvakiran Paravastu (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ramiro Pareja (Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Ramiro Pareja (Departamento de Física, Universidad Carlos III, Avda de la Universidad, 30 28911-Leganés, Spain)

Co-author in P1.101 Characterization of the particles dispersion in W-Ti and W-V alloys by SANS

Tejas J. Parekh (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Peeter Paris (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Jong Sung Park (DEMO Technology Division, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.120 Calculations on plasma radiation heat distribution on the first walls of the K-DEMO reactor

JongSung Park (Fusion Engineering Center, DEMO Technology Division, National Fusion Research Institute (NFRI), Daejeon, South Korea)

Co-author in P2.119 R2S method based shutdown dose rate estimation on the K-DEMO equatorial port area

Kaprai Park (Tokamak Device Technology Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Yi-Hyun Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Kaprai Park (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Seong Dae Park (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Dong-Seong Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Kaprai Park (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Seong Dae Park (Korea Atomic Energy Research Institute (KAERI), Daejeon, South Korea)

Co-author in P1.164 Thermo-Mechanical Analysis of the support component Between TBM and TBM-shield

Sung Dae Park (Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component

Changho Park (Japan Agency for Quantum and Radiological Science and Technology, 2-166 Omotedate, Obuchi, Rokkasho, Kamikita, Aomori 039-3212, Japan)

Co-author in P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow

K. R. Park (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

H. K. Park (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

Youngjae Park (Department of Nuclear Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, South Korea)

Co-author in P4.103 Critical heat flux of water-subcooled flow in swirl tube with rail-type twisted tape

Yi-Hyun Park (TBM Technology Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process

H.K. Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Hyun Taek Park (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Hyun Teak Park (Heating and Current Drive Research Team, National Fusion Research Institute(NFRI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

Hyun Ki Park (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Soo Hwan Park (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Dong-Seong Park (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Soo-Hwan Park (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Jong Sung Park (DEMO Technology Division, NationalFusionResearchInstitute, Daejeon, South Korea)

Co-author in P2.118 Preliminary analyses for electromagnetic loads of the K-DEMO divertor system

S.H. Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Hyeon K. Park (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Kaprai Park (KSTAR research center, NFRI, Daejeon, South Korea)

Co-author in P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR

Hyun-Ki Park (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Jong Sung Park (DEMO Technology, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Yi-Hyun Park (NFRI, Daejeon, South Korea)

Co-author in P1.192 Sample holder design for effective thermal conductivity measurement of pebble-bed using laser flash method

Seong Dae Park (Nuclear Fusion Engineering Development Department, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P2.135 Components Design and Performance Analysis for the Preliminary Design of HCCR TBM-set

Soon Chang Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material

Jun-Young Park (Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels

Jun Young Park (Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Yi-Hyun Park (System Technology Division, National Fusion Research Institute, Daejeon, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Jihye Park (FEA Division, TAESUNG S&E, INC, Seoulforest Kolon Digital Tower II, 10F, Seongsu-dong 2 ga, Seongdong-gu, Seoul, South Korea)

Co-author in P1.003 Structural analysis for final design of ITER sector sub-assembly tool

Jun-Young Park (Korea Institute of Materials Science (KIMS), Changwon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

Chul-Kyu Park (Tokamak Engineering Department, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Goon-Cherl Park (Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744, South Korea)

Co-author in P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events

Soo-Hwan Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Jongyoon Park (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Min Park (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Dae-jeon, South Korea)

Co-author in P4.026 Development of an arc ion source based on Marx generator for VEST NBI system

Hyun-Ki Park (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Min Park (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source

Kanubhai Parmar (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

D. Parmar (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Sanjay L. Parmar (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Evgeny Parshutin (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Piotr Parys (Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.206 Laser-driven accelerator of intense plasma beams for materials research

Romain Pascal (ITER Organization, Cadarache, France)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Jean-Yves Pascal (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Quentin Pascual (Sogeti High Tech, 180 Rue René Descartes, 13857 Aix-en-Provence, France)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Volker Pasler (INR-MET, KIT, Karlsruhe, Germany)

Co-author in P3.145 Review of Hydrogen Isotopes Transport Parameter

Roberto Pasqualotto (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Jose Ygnacio Pastor (Department of Materials Science, Polytechnic University of Madrid, Profesor Aranguren s/n, E-28040 Madrid, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Jose Ygnacio Pastor (Dpto. de Ciencia de Materiales-CIME, Universidad Politécnica de Madrid, E 28040 Madrid, Spain)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Ignacio Pastor (Laboratorio Nacional de Fusion, CIEMAT, Madrid, Spain)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Carmen Pastor (INTA, Ctra de Ajalvir km 4, 28850 Torrejón de Ardoz, Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Adam Pataki (Wigner Research Centre for Plasmaphysics, Budapest, Hungary)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Adam Pataki (Plasma Physics, Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras

Amitkumar Pate (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

Manojkumar Patel (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Paresh. J. Patel (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Tushar Patel (Divertor & First Wall Technology Development Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.108 Design and development of high pressure high temperature water circulation system for HHFTF

Nisarg Patel (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

A. Patel (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Nirav Patel (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Hiren Patel (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Miteshkumar Patel (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Kirit Patel (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Hitesh S. Patel (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Kaushal Patel (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Hitesh Kumar K. Patel (Diagnostic Neutral Beam, ITER India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Rakeshkumar J. Patel (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Kiritkumar B. Patel (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

J.C. Patel (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Ketan G. Patel (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

S.K. Pathak (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Haresh Pathak (In-Walled Shield, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints

Firozkhan S. Pathan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Michael Patterson (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Gabriella Pautasso (Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

Mauro Pavei (Consorzio RFX, 4, Corso Stati Uniti - 35127, Padova, Italy)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Pereslavtsev Pavel (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Karlsruhe, Baden-Wurttemberg, Germany)

Co-author in P3.159 Coupled neutronic and engineering analysis of the Helium Cooled Pebbled Bed with Be12Ti

Carl Pawley (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

Oscar Paz (Sgenia Solutions, Madrid, Spain)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

A. Peacock (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, JET Exploitation Unit, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Robert Pearce (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Thomas Sunn Pedersen (W7-X, Max-Planck Institut, Wendelsteinstrasse 1 -17489 Greifswald, Germany)

Co-author in P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring

Thomas Sunn Pedersen (E4, Max-Planck-Institut Plasmaphysik, Greifswald, Germany)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Diego Pedron (COELME Costruzioni Elettromeccaniche S.p.A., via G. Galilei n° 1/2, 30036 S. Maria di Sala (Venezia), Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Bernard Pegourie (CEA, Cadarache 13108 Saint-Paul-lez-Durance Cedex, France)

Co-author in P2.019 Conceptual design of the JT-60SA pellet launching system

B. Pegourie (CEA Cadarache, Saint-Paul-lez-Durance, France)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Bernard Pegourie (CEA-IRFM, 13108 Saint-Paul-lez-Durance, France)

Co-author in P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets

Bernard Pegurie (CEA-IRFM, 13108 Saint-Paul-lez-Durance, France)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Kun Pei (Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE

Xiaofang Pei (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

Grzegorz Pelka (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P1.114 Integrated core-SOL-divertor modelling for DEMO with tin divertor

Bertrand Peluso (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Benjamin G. Penaflor (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

Igor Penalva (Nuclear Engineering and Fluid Mechanics, University of the Basque Country (UPV/EHU), Bilbao, Spain)

Co-author in P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi

Yannick Peneliau (DEN-DER, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Jianfei Peng (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Xuebing Peng (Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Jiao Peng (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.191 Investigation of repetitive cleaning of first mirror using radio frequency plasma

Changhong Peng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P2.155 Experimental study on the subcooled boiling in square channel

Long Pengcheng (Institute of Nuclear Energy Safety Technology, Hefei, China)

Co-author in P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model

Christophe Penot (Port Plugs & Diagnostics Integration Division, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, , France)

Co-author in P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics

Florian Penzel (ITER Technology & Diagnostics, Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras

Florian Penzel (Max Planck Institut für Plasmaphysik, Garching. Boltzmannstr. 2, Germany)

Co-author in P1.057 Real-time calibration parameter compensation of metal resistive bolometers operating in a thermal varying environment

Florian Penzel (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Rita Pereira (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Rita C. Pereira (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

R. C. Pereira (Instituto de Plasmas e Fusao Nuclear,Instituto Superior Technico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Rita C. Pereira (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Rita C. Pereira (Instituto Superior Técnio, Instituto de Plasmas e Fusão Nuclear, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

R. C. Pereira (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

R.C. Pereira (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Pavel Pereslavtsev (Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Karlsruhe, Germany)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Pavel Pereslavtsev (Karlsruhe Institute of Technology, Postfach 3640, 76021 Karlsruhe, Germany, Germany)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

P. Pereslavtsev (Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Pavel Pereslavtsev (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances

Pavel Pereslavtsev (Karlsruhe Institute for Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.153 Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO

Albert Perez (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Alberto Perez (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

German Perez (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

German Perez (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Albert Perez (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Alberto Perez (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Miguel Perez-Lasala (Diagnostics, F4E, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Miguel Perez-Lasala (Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Rory Perkins (Plasma Physics Laboratory, Princeton University, Princeton, New Jersey, United States)

Co-author in P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand

Mauro Perna (NIDEC-ASI, Milan, Italy)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Valeria Perseo (Dipartimento di Fisica “G. Occhialini”, Università degli Studi di Milano-Bicocca, Milano, Italy;Istituto di Fisica del Plasma “P. Caldirola”, CNR, Milano, Italy)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Dmitrii Pertsev (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Simone Peruzzo (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P1.075 Upgraded electromagnetic measure system for RFX-mod
Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Paolo Pesenti (ASG Superconductors SpA, Corso F.M. Perrone 73 R - Genova, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Sergey Pestchanyi (INR, KIT, Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen, Germany)

Co-author in P2.115 Validation of TOKES vapour shield simulations against experiments in the 2MK-200 facility

Sergey Pestchanyi (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Matej Peterka (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

B. Peters (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Benedikt J. Peters (Institute for Technical Physics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P4.146 Analysis of low pressure hydrogen separation from fusion exhaust gases by means of superpermeability

Claus Petersen (Ingenieurbüro Petersen, Karlsruhe, Germany)

Co-author in P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels

Per Peterson (Department of Fusion Plasma Physics, Royal Institute of Technology (KTH), Association VR, 100 44 Stockholm, Sweden)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Per Petersson (Fusion Plasma Physics, Royal Institute of Technology (KTH), Stockholm, Sweden)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Aleksandrs Petjukevics (University of Daugavpils, Parades Str.1, LV 5401, Daugavpils, Latvia)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Eberhard Pfaff (PVA Industrial Vacuum Systems GmbH, Im Westpark 10-12, 35435 Wettenberg, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Z. Piec (ITER CS Project, General Atomics, San Diego, California, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Zito Pietro (FSN-FUSTEC-IEE, ENEA, FRASCATI (ROME), Italy)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Leonardo Pigatto (Centro Ricerche Fusione (CRF), Università di Padova, Via Gradenigo, 6/A, Italy)

Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Kaarel Piip (Institute of Physics, University of Tartu, 50411Tartu, Estonia)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Nicola Pilan (Consorzio RFX, Corso Stati Uniti 4, Italy)

Co-author in P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests

Nicola Pilan (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Vincent Pilard (Fusion for Energy F4E, Barcelona, Spain)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

M. Pillon (Department of Fusion and Technology for Nuclear Safety and Security , ENEA, via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

M. Pillon (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, ENEA, Department of Fusion and Nuclear Safety Technology, I-00044 Frascati (Rome), Italy)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

M. Pillon (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome) Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Dirk Pilopp (E4, Max-Planck-Institut Plasmaphysik, Greifswald, Germany)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Riccardo Pilotti (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Riccardo Pilotti (Department of Fusion and Nuclear Safety Technology, ENEA, 00044 Frascati (Rome), Italy;Department of Industrial Engineering, University of Rome 'Tor Vergata', 1, Via del Politecnico, 00133 Rome, Italy)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

A. Pimazzoni (Consorzio RFX, Padova, Italy)

Co-author in P4.039 Inverse heat flux evaluation from thermographic measurements in SPIDER

Antonio Pimazzoni (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Wang Ping (Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Steffen Pingel (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Tonio Pinna (ENEA UTFUS-TECN, Via Enrico Fermi, 45, 00044 Frascati (Roma), Italy)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Tonio Pinna (Nuclear Fusion and Safety Technologies Department (FSN-FUSTEC-TEN), ENEA, Frascati (Rome), Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

G. Pintsuk (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Gerald Pintsuk (Institute of Energy and Climate Research – Plasmaphysics, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Gerald Pintsuk (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Gerald Pintsuk (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung, 52425 Juelich, Germany)

Co-author in O5B.1 Post-irradiation high heat flux investigation of plasma facing components

R. Piovan (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Paolo Piovesan (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Reinhard Pippan (Erich Schmid Institute of Materials Science of the Austrian Academy of Sciences, 8700 Leoben, Austria)

Co-author in P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process

Chiara Piron (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Alfredo Pironti (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Attila Piros (Department of Machine and Product Design, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P3.072 Fuzzy logic based model of bolometer detector sensors and cameras

Alexander Pisarev (Plasma Physics Department, National Research Nuclear University MEPhI, Moscow, Kashirskoe highway, 31, Russian Federation)

Co-author in P4.117 Low temperature deuterium release from lithium films

Richard A Pitts (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex, France)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Richard Pitts (ITER Organization, St Paul Lez Durance, France)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Richard Pitts (Science Division, ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance, France)

Co-author in P2.115 Validation of TOKES vapour shield simulations against experiments in the 2MK-200 facility

Andrew Pivkov (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Andrei Pivkov (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Francesco Pizzo (Dept. of Industrial and Information Engineering, Seconda Università di Napoli, Aversa (CE), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Francesco Pizzo (Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Francesco Pizzo (Department of Industrial and Information Engineering, Seconda Università degli studi di Napoli, IT-81031, Aversa, Italy)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Aldo Pizzuto (ENEA, Centro Ricerche Frascati, Italy, Frascati, Italy)

Co-author in P2.010 The DTT device: general layout

Ernests Platacis (Institute of Solid State Physics, University of Latvia, 32 Miera iela, Salaspils, Latvia)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Paola Platania (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Jiri Plocek (Institute of Inorganic Chemistry AS CR, 250 68 Rez, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Bernhard Ploeckl (Max-Planck-Institute for Plasmaphysics, Garching, Germany)

Co-author in P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade

B. Ploeckl (Max-Planck-Institute of Plasma Physics (IPP), Garching, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Bernhard Ploeckl (Max Planck Institute for Plasma Physics, 85748 Garching, Germany)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Bernhard Ploeckl (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Bernhard Ploeckl (Tokamak Scenario Development Division (E 1), Max-Planck-Institut for Plasmaphysics, Garching, Germany)

Co-author in P2.019 Conceptual design of the JT-60SA pellet launching system

Steve Ployhar (Cooling Water Section, ITER Organization, Route de Vinon sur Verdon, 13115 St Paul Lez Durance, France)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

D. Plummer (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Christine Pocheau (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Ivan Podadera (CIEMAT, Madrid, Spain)

Co-author in P3.008 Design, integration and manufacturing of the MEBT and DPlate support tables for IFMIF LIPAc

Salvatore Podda (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

Salvatore Podda (FSN Department, C. R. Frascati, ENEA, Via E. Fermi 45, 00044 Frascati (RM), Italy)

Co-author in P4.158 State of the art and perspective of high-speed pellet injection technology

Ivan Poddubnyi (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Ivan Poddubnyi (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Luigi Antonio Poggi (Industrial Engineering, Associazione EUROFUSION-ENEA, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Luigi Antonio Poggi (Industrial Engineering, University of Rome Tor Vergata, Rome, Italy)

Co-author in P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion

Luigi Antonio Poggi (Associazione EUROFUSION-ENEA, Department of Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Luigi Antonio Poggi (Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

Władysław Pohorecki (Faculty of Energy and Fuels, AGH-University of Science and Technology, Al. Mickiewicza 30 30-059 Kraków, Poland)

Co-author in P1.185 Long-lived radionuclide activity formed in ITER steel composites in 6Li-D converter neutron field

Yves Poitevin (ITER, Fusion for Energy (F4E), Barcelona, Spain)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Gergo Pokol (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

G.I. Pokol (Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Hugo Policarpo (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Lisboa, Portugal)

Co-author in P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system

Hugo Policarpo (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal;IDMEC, LAETA, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas

Hugo Policarpo (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av Rovisco Pais, 1049-001 Lisboa, Portugal;IDMEC, LAETA, Instituto Superior Técnico, Av. Rovisco Pais, 1049-001, Portugal)

Co-author in O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas

Fabio Pollastrone (ENEA CR Frascati, FRASCATI (ROME), Italy)

Co-author in P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak

Fabio Pollastrone (FSN (Nuclear Fusion and Fission and Related Technologies Department), ENEA, Via Enrico Fermi 45, Frascati, Italy)

Co-author in P4.088 Automatic pattern recognition on electrical signals applied to Neutron-Gamma discrimination

Gian Mario Polli (ENEA, Via Enrico Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Gian Mario Polli (FSN, ENEA, Via E. Fermi 45, Frascati, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Gian Mario Polli (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Sergey Polosatkin (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation;Novosibirsk State Technical University, 20 Karla Marksa prospect, Novosibirsk, 630092, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Eduard Polunovskiy (ITER Organisation, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Nicola Pomaro (Consorzio RFX, Padova, Italy)

Co-author in P1.023 Implementation of the SPIDER Central Interlock

Dan Ponce (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

Lionel Poncet (Fusion for Energy, Josep Pla 2, 08019 Barcelona , Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Yuriy Ponkratov (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Yuri Ponkratov (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Bogdan Popescu (National Institute of Materials Physics, Magurele, Romania)

Co-author in P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components

Alexey Popkov (Plasma Physics Department, National Research Nuclear University MEPhI, Moscow, Kashirskoe highway, 31, Russian Federation)

Co-author in P4.117 Low temperature deuterium release from lithium films

Vladimir Popov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Sergey Popov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Ivan Popov (Mechanics and Control, Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russian Federation)

Co-author in P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8

Anatoli Popov (Institute of Solid State Physics, University of Latvia, Riga, Latvia)

Co-author in P3.184 Diffusion-controlled F center thermal annealing in neutron, electron and heavy-ion irradiated insulators

Sergei Popovichev (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

S. Popovichev (Culham Centre for Fusion Energy, Abingdon, Oxon, OX14 3DB, UK, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Sergey Popovichev (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

S. Popovichev (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Michal Poradzinski (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P1.114 Integrated core-SOL-divertor modelling for DEMO with tin divertor

Maria Teresa Porfiri (Unità Tecnica Fusione, ENEA-Frascati, Frascati, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Maria Teresa Porfiri (ENEA FSN-FUSTEC-TEN, ENEA Frascati, via E. Fermi, 45 - 00044 Frascati, Italy)

Co-author in P2.153 Consistent post-test analyses of LIFUS5 experiment

Maria Teresa Porfiri (FSN, ENEA, Frascati, Italy)

Co-author in P2.199 Parametric explorative study of DEMO galleries pressurization in case of ex-vessel LOCA

Maria Teresa Porfiri (Agenzia nazionale per le nuove tecnologie, l’energia e lo sviluppo economico sostenibile (ENEA), Via Enrico Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P1.204 Methodology of the Source Term estimation for DEMO Rector

Maria Teresa Porfiri (Nuclear Fusion and Safety Technologies Department (FSN-FUSTEC-TEN), ENEA, Frascati (Rome), Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Maria Teresa Porfiri (ENEA Nuclear Fusion Technologies, Via Enrico Fermi 45, 00044 Frascati, Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Corneliu Porosnicu (3National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Corneliu Porosnicu (National Institute for Laser, Plasma and Radiation Physics, Atomistilor Str. 409, 077125, Magurele, Romania)

Co-author in P3.111 High power fs laser irradiation of BeCW coatings

Corneliu Porosnicu (National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies

Marco Portesine (POSEICO, via Pillea 42-44, 16152 Genova, Italy)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Alfredo Portone (Fusion for Energy, Barcelona, Spain)

Co-author in P3.085 Modeling of ITER TF cooling system through 2D thermal analyses and enthalpy balance

Alfredo Portone (ITER, FUSION FOR ENERGY, BARCELONA, Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Alexander Povstyanko (State Scientific Center – Research Institute of Atomic Reactors, Dimitrovgrad, Russian Federation)

Co-author in P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels

Krzysztof Pozniak (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Krzysztof T. Pozniak (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Krzysztof T. Pozniak (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Krzysztof Pozniak (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Subrata Pradhan (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

S. Pradhan (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Bhadresh R. Praghi (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Vattipelle Prahlad (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Bhavesh Prajapati (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Vishnu Prajapati (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Upendra Prasad (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

U. Prasad (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Miguel Pretelli (Power Electronics, OCEM Energy Technology, Via della Solidarietà 2/1 - 40056 Valsamoggia (BO), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

D. Price (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Gregor Primc (Jožef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Andrea Principe (Angelantoni Test Technologies (ATT), Massa Martana (PG), Italy)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Rafał Prokopowicz (Nuclear Facilities Operations Department, National Centre for Nuclear Research (NCBJ), Otwock, Świerk, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

Rafał Prokopowicz (Reactor Research & Technologies Division, National Centre for Nuclear Research, ul. Andrzeja Sołtana 7 05-400 Otwock, Świerk, Poland)

Co-author in P1.185 Long-lived radionuclide activity formed in ITER steel composites in 6Li-D converter neutron field

Jan Prokupek (Technological Experimental Loops, Centrum výzkumu Řež s.r.o., Husinec-Řež, Czech Republic)

Co-author in O4B.4 HELCZA – High Heat Flux Test Facility for Testing ITER EU First Wall Components

Maxime Proust (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Giuseppe Pruneri (Fusion department, IFMIF EVEDA, Kamikita-gun,Aomori, Japan)

Co-author in P4.184 The Conventional Facilities of the Linear IFMIF Prototype Accelerator (LIPAc)

Pavel Psota (Regional Centre for Special Optics and Optoelectronic Systems, Institute of Plasma Physics, Turnov, Czech Republic)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Viktor Puchy (Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia)

Co-author in P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications

Jerome Puech (Radio-Frequency Department, CNES, the French Space Agency, 18 avenue Edouard Belin, 31000 Toulouse, France)

Co-author in P1.027 Electron Emission Under Uniform Magnetic Field of Materials For Fusion And Spatial Applications

Andrey Pugachev (Forss Consulting Ltd, Magnitogorskaya street, 51, lit. E, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Adrian Puiu (Fusion for Energy, Calle Josep Pla 2,Torres Diagonal Litoral B3, Spain)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Simone Pupeschi (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, 76021 Karlsruhe, Germany)

Co-author in P1.157 Effective thermal conductivity of advanced breeder pebble beds

Juris Purans (Institute of Solid State Physics, University of Latvia, Riga, Latvia)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Dharmesh Purohit (Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Krzysztof Pytel (Reactor Research & Technologies Division, National Centre for Nuclear Research, ul. Andrzeja Sołtana 7 05-400 Otwock, Świerk, Poland)

Co-author in P1.185 Long-lived radionuclide activity formed in ITER steel composites in 6Li-D converter neutron field

Krzysztof Pytel (Nuclear Facilities Operations Department, National Centre for Nuclear Research (NCBJ), Otwock, Świerk, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

Xinyuan Qian (Schoole of Nuclear Science and Technology, University of Science and Technology of China, Jinzhai Road 96, 230026, Hefei Anhui, China;Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Li Qian (Process Engineering, Materion Beryllium and Composites, Elmore, OH, United States)

Co-author in P4.114 Critical processing considerations for ITER first wall beryllium tiles

Shijun Qin (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Jing Gang Qin (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Yang Qing Xi (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.036 Fabrication of the ICRF antenna of ASDEX-U device

Yuefeng Qiu (INR, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Yuefeng Qiu (Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES

Yuefeng Qiu (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.172 The test cell configuration under IFMIF-DONES condition

Hao Qu (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Gan Quan (Institute of Nuclear Energy Safety Technology, Hefei, China)

Co-author in P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model

Paulo Braga Quental (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas

Paulo Quental (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas

Paulo Quental (Instituto de Plasmas e Fusão Nuclear, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.052 Performance assessment of critical waveguide bends for the ITER in-vessel plasma position reflectometry systems

Paulo Braga Quental (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Lisboa, Portugal)

Co-author in P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system

Vicente Queral (National Fusion Laboratory, CIEMAT, MADRID, Spain)

Co-author in P2.092 Metrology of an additively manufactured coil frame for stellarators

Eamonn Quinn (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Karishma Qureshi (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

S. Raatz (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Sylvio Raatz (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

Wojciech Rachtan (Faculty of Maritime Technology and Transport, West Pomeranian University of Technology, Szczecin, Al. Piastów 41, 71-065 Szczecin, Poland)

Co-author in P1.083 Experimental stand for thermal-hydraulic tests of forced flow conductors using water at room temperature

Rene Raffray (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements
Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap
Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Rene Raffray (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Riccardo Ragona (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Riccardo Ragona (Laboratory for Plasma Physics, Royal Military Academy LPP-ERM/KMS, B-1000 Bruxelles, Belgium;Department of Applied Physics, Ghent University, 9000 Ghent, Belgium)

Co-author in O5B.4 Multi-section Traveling Wave Antenna for heating of large machines as DEMO

Kian Rahbarnia (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator

K. Rajnish (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Dhaval Rajyaguru (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

Siddibomma Rambabu (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Michal Rames (Institute of Physics ASCR, Praha 8, Czech Republic)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

Francisco Ramos (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Francisco Ramos (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Gilles Rampal (DEN, DM2S, CEA-Saclay, F-91191 Gif-Sur-Yvette, France)

Co-author in P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement

Rakesh Ranjan (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Sutapa Ranjan (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.069 The WEST Plasma Facing Components Protection
Co-author in P1.070 Measurements and controls implementation for the WEST project

Seppo Rantala (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

David Rapisarda (National Fusion Laboratory, CIEMAT, Madrid, Spain)

David Rapisarda (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

David Rapisarda (Fusion National Laboratory, CIEMAT, Avda. Complutense, 40, 28040 Madrid, Spain)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

David Rapisarda (Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

David Rapisarda (CIEMAT, Avda. Complutense 40, 280 40, Spain)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

David Rapisarda (Fusion Technology Division, CIEMAT, Madrid, Spain)

Co-author in P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility

Juergen Rapp (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Christopher J. Rapson (Tokamak Scenario Development E1, Max Planck Institut fuer Plasmaphysik, Garching, Germany)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Christopher Rapson (E1, Max-Planck Institute for Plasma Physics, Garching, Garching, Germany)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Christopher Rapson (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Chris Rapson (Max-Planck-Institut fuer Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Christopher James Rapson (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Christopher J. Rapson (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink

Marcin Rasinski (Institut für Energie- und Klimaforschung – Plasmaphysik, IEK-4, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

Marcin Rasinski (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.180 Yttrium oxide coatings as tritium permeation barriers

Marcin Rasinski (Institute of Energy and Climate Research – Plasmaphysics, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Marcin Rasinski (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Jens Juul Rasmussen (DTU Physics, Technical University of Denmark, Fysikvej, building 311 2800 Kgs. Lyngby, Denmark)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Naveen Rastogi (Remote Handling Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

Kulav Rathod (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Nisha Singh Rathore (Department of Physics, University of Lucknow, Lucknow, India)

Co-author in P2.207 Guiding of laser beam in magnetized quantum plasma

Svetlana Ratynskaia (Space and Plasma Physics, KTH Royal Institute of Technology, Teknikringen 31,SE-100 44 Stockholm, Sweden)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

J. Rauch (DIII-D National Fusion Facility, General Atomics, San Diego, United States)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

J. Rauch (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

Gerhard Raupp (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Gerhard Raupp (Tokamak Scenario Development E1, Max Planck Institut fuer Plasmaphysik, Garching, Germany)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Gerhard Raupp (E1, Max-Planck Institute for Plasma Physics, Garching, Garching, Germany)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Jigar Raval (ITER Organization, Route de Vinon-sur-Verdon – CS 90046, 13067 St Paul-lez-Durance Cedex, France)

Co-author in P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints

Tusharkumar Y. Raval (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Dilip Raval (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

B. Raval (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Nathalie Ravenel (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Nathalie Ravenel (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Gian Luigi Ravera (Dipartimento FSN, ENEA, via E.Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.007 The DTT device: systems for heating

Gian Luca Ravera (FSN - Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide

Alexey Razdobarin (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Alexey Razmerov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Andrea Reale (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

M. Rebai (Dipartimento di Fisica Università degli Studi di Milano-Bicocca, Milano, Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Luigi Reccia (Fusion for Energy, Barcelona, Spain)

Co-author in P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER

Matthias Reich (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Roger Reichle (ITER Organization, Saint-Paul-lez-Durance, France)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Roger Reichle (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Roger Reichle (ITER Organization, Route de Vinon sur Verdon, 13115 Saint-Paul-lez-Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Roger Reichle (ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic

Roger Reichle (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex, France)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Roger Reichle (ITER Organization, Route de Vinon sur Verdon,Saint Paul Lez Durance, France)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Holger Reimerdes (EPFL,SPC, Lausanne, Switzerland)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

Ernst-Arndt Reinecke (Institute of Energy and Climate Research – Nuclear Waste Management and Reactor Safety (IEK-6), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

Jun Ren (Princenton University Plasma Physics Laboratory, Princeton, NJ 08543, United States)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Xiaoli Ren (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Sebastien Renard (CEA, IRFM, 13108 Saint-Paul-Lez-Durance, France)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Sebastien Renard (Institute for Magnetic Fusion Research, CEA, 13108 Saint-Paul-lez-Durance, France)

Co-author in P1.012 A software eco-system for the integrated design of W7-X

Mathieu Reungoat (Centrum výzkumu Řež, Husinec-Řež, Czech Republic)

Co-author in P1.147 Status of the platform for integration and maintenance tests of the European TBM systems

Arnd Reutlinger (Kampf Telescope Optics, Munich, Germany)

Joerg Rey (Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe, Germany)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

S. Reynolds (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Stephen Reynolds (Power and Active Operations, UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in O3B.1 The JET Materials Detritiation Facility for reducing radioactive waste liabilities

Pavel Reznichenko (PELIN, LLC., Saint-Petersburg, Russian Federation)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Chang-Kyu Rhee (Nuclear Materials Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods

Isabel Ribeiro (Institute for Systems and Robotics, Instituto Superior Tecnico, Av. Rovisco Pais 1, Lisboa, Portugal)

Co-author in O3C.4 Assessment of navigation technologies for autonomous vehicles in nuclear fusion facilities

Italo Ricapito (TBM&MD Project, Fusion for Energy, Carrer J. Pla, 2, Builiding B3, Barcelona, Italy)

Co-author in P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy

Italo Ricapito (TBM&MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Builiding B3, 08019 Barcelona, Spain)

Co-author in P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis

Italo Ricapito (TBM&MD Project, Fusion for Energy, Carrer J. Pla 2, Building B3, 08019 Barcelona, Spain)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Italo Ricapito (Fusion for Energy, Barcelona, Spain)

Co-author in P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems

Valeria Riccardo (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

V. Riccardo (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Valeria Riccardo (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Pedica Riccardo (Vitrociset, SPA, Via Tiburtina, 1020 - 00156 Roma, Italy)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Valeria Riccardo (CCFE, Abingdon, United Kingdom)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Daria Ricci (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Maria Lorena Richiusa (Dipartimento di energia, Ingegneria dell'Informazione e modelli matematici, University of Palermo, Viale delle Scienze, Palermo, Italy)

Co-author in P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept

Maria Lorena Richiusa (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128 Palermo, Italy)

Co-author in P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate

Maria Lorena Richiusa (Department of Energy, Information Engineering and Mathematical Models, University of Palermo, Viale delle Scienze, Edificio 6, 90128, Palermo, Italy)

Co-author in P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket

Lorena Richiusa (Energia, Ingegneria dell'Informazione e Modelli Matematici, Università di Palermo, Palermo, Italy)

Co-author in P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module

Marianne Richou (CEA, Saint Paul Lez Durance, France)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Marianne Richou (IRFM, CEA, F-13108 Saint Paul Lez Durance, France)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Marianne Richou (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Rudolf Riedl (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Rudolf Riedl (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Albert Riego (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Heike Riemann (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Heike Riemann (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Heike Riemann (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Johann Riesch (Max-Planck-Institut für Plasmaphysik, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Johann Riesch (Max-Planck-Institut für Plasmaphysik (IPP), Boltzmannstrasse 2, 85748 Garching, Germany)

Co-author in P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests

Michael Rieth (IAM-AWP, Karlsruhe Institute of Technology, , POB 3640, 76021 Karlsruhe, Germany)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Michael Rieth (Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying

Michael Rieth (IAM-AWP, Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in I4.1 European-WP development on functional materials for diagnostics and H&CD systems in future fusion reactors

Michael Riethm (Institute for Applied Materials, Karlsruhe Institute of Technology,, Eggenstein-Leopoldshafen, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Davide Rigamonti (Dipartimento di Fisica “G. Occhialini”, Università degli Studi di Milano-Bicocca, Milano, Italy;Istituto di Fisica del Plasma “P. Caldirola”, CNR, Milano, Italy)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

S.D. Rigamonti (Dipartimento di Fisica Università degli Studi di Milano-Bicocca, Milano, Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Andre Rijfers (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Fernanda Rimini (EURATOM-CCFE Fusion Association, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.044 A 3D Electromagnetic Model of the Iron Core in JET

Fernanda Rimini (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Fernanda Rimini (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Fernanda Rimini (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Luigi Rinaldi (OCEM Energy Technology, Via della Solidarietà, 2-1/40056 Valsamoggia (BO), Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Luigi Rinaldi (OCEM Energy Technology srl, Via Della Solidarietà 2/1, 40056 Valsamoggia (BO) , Italy)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Esther Rincon (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Esther Rincon (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Esther Rincon (National Fusion Laboratory, CIEMAT, MADRID, Spain)

Co-author in P2.092 Metrology of an additively manufactured coil frame for stellarators

Esther Rincon (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Luis Rios (National Fusion Laboratory, CIEMAT, MADRID, Spain)

Co-author in P2.092 Metrology of an additively manufactured coil frame for stellarators

Luis Rios (CIEMAT, Av. Complutense, 28015 Madrid, Spain)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Luis Rios (CIEMAT, Madrid, Spain)

Co-author in P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic

Natale Rispoli (Institute of Plasma Physics “P.Caldirola”, National Research Council of Italy, Milan, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Natale Rispoli (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Konrad Risse (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Konrad Risse (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

K. Risse (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

David Rittich (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.037 Helium neutral beam injection into ASDEX Upgrade

M. Riva (ENEA C. R. Frascati, Dipartimento FSN, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Marco Riva (Fusion, ENEA, Frascati, Italy)

Co-author in P1.061 Hardware architecture the JET Neutron Camera Upgrade (NCU) new data acquisition and processing system

Giulio Riva (Istituto per l'Energetica e le Interfasi, Via R. Cozzi 53, 20125 Milano, Italy)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Marco Riva (Dipartamento FSN, ENEA C. R. Frascati, E. Fermi 45, 00044 Frascati(Roma), Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Marco Riva (FSN (Nuclear Fusion and Fission and Related Technologies Department), ENEA, Via Enrico Fermi 45, Frascati, Italy)

Co-author in P4.088 Automatic pattern recognition on electrical signals applied to Neutron-Gamma discrimination

Juan Francisco Rivero-Rodriguez (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Andrea Rizzolo (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Andrea Rizzolo (Consorzio RFX, Pdova, Italy)

Co-author in P4.007 Final design and prototyping of the SPIDER caesium ovens

Pasqualotto Roberto (Consorzio RFX, Corso Stati Uniti 4, Italy)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Steve Roberts (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

H. Roberts (National Physics Laboratory, TW11 OLW Teddington, United Kingdom, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Stuart Robinson (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Fernando Roca Urgorri (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P2.162 Preliminary system modelling for the EUROfusion Dual Coolant Lithium Lead blanket

Selanna Roccella (FSN, ENEA, Frascati, Italy)

Co-author in P1.107 Residual stresses evaluation during Plasma Facing Units Hot Radial Pressing manufacturing process

Selanna Roccella (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Selanna Roccella (Fusion and Technology for Nuclear Safety and Security, ENEA, Via Enrico Fermi, 45 - 00044 Frascati, Italy)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Giuliano Rocchi (Dipartimento FSN, ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

G. Rocchi (ENEA, Frascati, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Riccardo Rocella (COO, Analysis Division, ITER Organization, Caradache, France)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Jorge Roces (Department of Construction and Manufacturing Engineering, University of Oviedo, Gijon - Asturias, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Jorge Roces (Department of Construction and Manufacturing Engineering, University of Oviedo, Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Damien Rodillon (Avantis Engineering Groupe, ZI de l’Aiguille 46100, Figeac, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Igor Rodin (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Antonio Rodrigues (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Antonio P. Rodrigues (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Antonio Rodrigues (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Antonio Rodrigues (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Antonio Rodrigues (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

Jorge Rodriguez (Remote Applications in Challenging Environments (RACE), UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in P4.138 Status and Developments of the MASCOT telemanipulator system for JET Remote Maintenance

Eduardo Rodriguez (Department of Construction and Manufacturing Engineering, University of Oviedo, Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Alain Rodriguez (Neutronic Calculations, SEA (Shielding Engineering and Analysis) SL, Las Rozas-Madrid, Spain)

Co-author in P4.185 IFMIF bean dump front shielding residual dose study with SEACAB metholodogy

Eduardo Rodriguez (Department of Construction and Manufacturing Engineering, University of Oviedo, Gijon - Asturias, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Mauricio Rodriguez-Ramos (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Byung-Ryul Roh Roh (Hyundai Heavy Industries Co. Ltd., Ulsan, South Korea)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Volker Rohde (Max-Planck-Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Akbar Rohollahi (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Akbar Rohollahi (University of Saskatchewan, 116 Science Place, Saskatoon, SK S7N 5E2, Canada)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Beatriz Rojo (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Rolf Rolli (Institute for Applied Materials (IAM), Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment

Rolf Rolli (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.154 Out-of-pile tritium adsorption/release behavior of advanced EU breeder pebbles

M. Rollig (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Guillermo Roman (Sgenia Solutions, Madrid, Spain)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Ryszard Romaniuk (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Alexander Romannikov (Institution “Project Center ITER”, 123182, Square of Academic Kurchatov 1, Moscow, Russian Federation)

Tomas Romsy (Faculty of Mechanical Engineering, CTU in Prague, Prague, Czech Republic)

Co-author in P3.011 Water Evaporation - Condensation Cooling System Design for Pb-Li17 Cold Trap

Dennis Ronden (Fusion physics - Remote Handling, DIFFER, De Zaale 20, 5612 AJ, Eindhoven, Netherlands)

Co-author in P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment

Wang Rongfei (Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Alexander Roshal (Joint Stock Company "D.V. Efremov Institute of Electrophysical Apparatus", Doroga na Metallostroy, 3, 196641 St. Petersburg, Russia, Russian Federation)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Alexander Roshal (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Alexander Roshal (JSC "NIIEFA", Saint-Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Marcin Rosinski (Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.206 Laser-driven accelerator of intense plasma beams for materials research

John Ross (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Federico Rossetto (Consorzio RFX, Pdova, Italy)

Co-author in P4.007 Final design and prototyping of the SPIDER caesium ovens

Paolo Rossi (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Paolo Rossi (FSN, ENEA, Via E. Fermi 45, Frascati, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Paolo Rossi (ENEA, Via Enrico Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Riccardo Rossi (Industrial Engineering, Associazione EUROFUSION-ENEA, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy, Italy)

Co-author in P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility

Riccardo Rossi (Industrial Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

George Rostomashvili (Andronikashvili Institute of Physics, Tamarashvili St. 6, 0186 Tbilisi, Georgia)

Co-author in P1.018 Properties of plasma injected in open magnetic trap from independent UHF source

Michael Rott (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Michael Rott (E1 - tokamak scenario development, Max Planck institute for plasma physics, Garching, Germany)

Co-author in P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade

Michael Rott (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Michael Rott (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Chandramouli Rotti (Diagnostic Neutral Beam (DNB), ITER-India (Institute for Plasma Research), Gandhinagar, India)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Chandramouli Rotti (Diagnostic Neutral Beam, ITER India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility

Yoann Rozier (Thales Electron Devices, 2 rue Marcel Dassault, Vélizy-Villacoublay, France)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Yoann Rozier (Thales Electron Devices, Vélizy-Villacoublay, France)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Davide Rozzia (DICI, University of Pisa, Largo Lucio Lazzarino 2, 56122, Pisa, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Marek Rubel (Fusion Plasma Physics, Royal Institute of Technology (KTH), Stockholm, Sweden)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Marek Rubel (Department of Fusion Plasma Physics, Royal Institute of Technology (KTH), Association VR, 100 44 Stockholm, Sweden)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

M. Rubel (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Department of Fusion Plasma Physics, Royal Institute of Technology (KTH), 100 44 Stockholm, Sweden)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Marek Rubel (Department of Fusion Plasma Physics, Royal Institute of Technology, 100 44 Stockholm, Sweden)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Marek Rubel (Fusion Plasma Physics, Royal Institute of Technology (KTH), 100 44 Stockholm, Sweden)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Sebastian Ruck (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Sebastian Ruck (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.116 Thermal performance augmentation by detached rib-arrays for helium-gas cooled First Wall applications

Dmitry Rudakov (Center for Energy Research, University of California, San Diego, La Jolla, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Dmitry L. Rudakov (University of California, San Diego, La Jolla, California 92093-0417, United States)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

Vita Rudovica (Faculty of Chemistry, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Fernando Rueda (Esteyco Mechanics, Esteyco, Madrid, Spain)

Co-author in P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket

Sebastian Ruess (Institute of High Frequency Electronics (IHE), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Wang Rui (Hefei Juneng Electro Physics High-tech Development Co., Ltd, 350 Shushanhu Road, Hefei,Anhui 230031, China)

Co-author in P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box

Wang Rui (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Road, Hefei,Anhui, China)

Co-author in P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D

George Ruiu (National Institute of Materials Physics, Magurele, Romania)

Co-author in P2.176 “FAST brazing” technology for W multi-metal laminates
Co-author in P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components

Mariano Ruiz (Telematics and Electronics Department, Technical University of Madrid, Madrid, Spain)

Co-author in P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory

Thomas Rummel (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results

Kerstin Rummel (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Thomas Rummel (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

T. Rummel (Wendelstein 7-X Operation, Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat

Thomas Rummel (Max-Planck-Institut fuer Plasmaphysik, Greifswald, Germany)

Co-author in P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X

Cristian Ruset (3National Institute for Lasers, Plasma and Radiation Physics, Bucharest 077125, Romania)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Cristian Ruset (Plasma Phisics and Nuclear Fusion, National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

Kaizad Rustomji (Institut Fresnel, Aix-Marseille Université, CNRS, Centrale Marseille, UMR 7249, F-13013, Marseille, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Alexander Ryazanov (National Research Centre “Kurchatov Institute”, 1 Akademika Kurchatova pl., Moscow, 123182, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Leszek Ryc (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Alexander Rydzy (FSN-FUSTEC-TES, ENEA Frascati, Frascati, Italy)

Co-author in P4.206 The project & quality management activities in ENEA fusion department

Seki Ryosuke (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Tomasz Rzesnicki (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Tomasz Rzesnicki (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Tomasz Rzesnicki (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Jeong-Woo Sa (ITER Organization, Saint Paul Lez Durance, France)

Co-author in P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment

Rongyuan Sa (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Hannu Saarinen (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Flavien Sabourin (ITER Organization, Route de Vinon-sur-Verdon - CS 90 046 - 13067 St Paul Lez Durance Cedex – France, France)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Edgar Sachs (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex , France)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Sergey Sadakov (ITER Organization, Route de Vinon sur Verdon CS 90 046 - 13067 Saint Paul, France)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Pavel Safarik (Faculty of Mechanical Engineering, CTU in Prague, Prague, Czech Republic)

Co-author in P3.011 Water Evaporation - Condensation Cooling System Design for Pb-Li17 Cold Trap

Valery Safronov (Institution “Project Center ITER”, 123182, Square of Academic Kurchatov 1, Moscow, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements
Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Valery Safronov (First Wall Section, Russian Federation ITER Domestic Agency, Kurchatov sq.1, 123182, Moscow, Russian Federation)

Co-author in P2.115 Validation of TOKES vapour shield simulations against experiments in the 2MK-200 facility

Akio Sagara (National Institute for Fusion Science, Toki, Japan)

Co-author in P2.172 Water hydraulic experiment as a simulant for the molten salt blanket with metal powders

Akio Sagara (NIFS, Gifu, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Akio Sagara (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Akio Sagara (National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Akio Sagara (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Akio Sagara (National Institute for Fusion Science, Toki, Gifu 509-5292, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Neda Sahebi (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.203 Accident analysis of helium cooled ceramic breeder test blanket system

Gabriella Saibene (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, E-08019 Barcelona, Spain)

Mikio Saigusa (College of Engineering, Ibaraki University, Hitachi, Ibaraki, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Makiko Saito (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Kenji Saito (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Ryuichi Sakamoto (Department of Helical Plasma Research, National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Keishi Sakamoto (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Yoshiteru Sakamoto (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Yoshiteru Sakamoto (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Yoshiteru Sakamoto (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Yoshiteru Sakamoto (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Yoshiteru Sakamoto (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Akira Sakasai (JAEA, Ibaraki 311-0193, Japan)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Akira Sakasai (Department of Tokamak System Technology, Japan Atomic Energy Agency, Mukouyama Naka-shi IBARAKI, Japan)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Hideo Sakasegawa (Japan Atomic Energy Agency, Rokkasho, Aomori 039-3212, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Hideo Sakasegawa (Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.175 Assessment of F82H development status toward DEMO with respect to the existing design code

Shodai Sakurada (Graduate School of Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Shinji Sakurai (Japan Atomic Energy Agency, Mukouyama, Naka City, Ibaraki, 311-0193 , Japan)

Co-author in P2.019 Conceptual design of the JT-60SA pellet launching system

Shigeki Sakurai (Graduate School of Advanced Integrated Studies in Human Survivability, Kyoto University, Yoshidanakaadachi, Sakyo, Kyoto, Japan)

Co-author in P1.207 Environmental impact of nuclear fusion biomass gasification plant

Shinji Sakurai (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

E. Salazar (ITER CS Project, General Atomics, San Diego, California, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Marocco Salvatore (FSN (Nuclear Fusion and Fission and Related Technologies Department), ENEA, Via Enrico Fermi 45, Frascati, Italy)

Co-author in P4.088 Automatic pattern recognition on electrical signals applied to Neutron-Gamma discrimination

Frank Samaille (CEA IRFM, Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System

Frank Samaille (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

F. Samaille (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation

Frank Samaille (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Franck Samaille (IRFM, CEA Cadarache, Saint Paul Les Durances, France)

Co-author in P3.123 Mechanical Analysis of WEST divertor support plate

Fernando Samaniego (Fundación Leading Innova (CT-Innova), Santander, Spain)

Co-author in P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel

Fernando Samaniego (Fundación Leading Innova (CT-Innova), C/ Isabel Torres 1, Santander, Cantabria 39011 , Spain)

Co-author in P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes

Karel Samec (Centrum Výzkum ŘEŽ, Husinec-Řež, Czech Republic)

Co-author in P2.107 Radiative heat exchange of plasma-facing components

Dmitry Samsonov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Dmitrii Samsonov (Ioffe Institute, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

J. Sanchez (CIEMAT, Madrid, Spain)

Co-author in I3.2 The IFMIF-DONES Fusion Neutron Source

Fernando Sanchez (National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain;National Fusion Laboratory (LNF), CIEMAT, Madrid, Spain)

Co-author in P3.172 Displacement damage effect on the thermal stability of deuterium in SiC

Fernando Sanchez (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.175 Radiation induced deuterium absorption dependence on temperature, dose rate, and gas pressure for SiC

Emilio Sanchez (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Maria Sanchez (Materials Science and Engineering Area, Rey Juan Carlos University, C/ Tulipan S/N 28933 Mostoles (Madrid), Spain)

Co-author in P2.188 Potential improvements of W-Eurofer first wall brazed joint using alloyed powders filler

Lucia Sanchis-Sanchez (CNA, University of Seville, Seville, Spain)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Guy Sandford (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Ge Sang (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

B. Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Jorge M. Santos (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, P-1049-001 Lisboa, Portugal)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Jorge Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Bruno Santos (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Bruno Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

B. Santos (Instituto de Plasmas e Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Bruno Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Goncalo Santos (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, P-1049-001 Lisboa, Portugal)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Bruno Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Bruno Santos (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

B. Santos (Instituto de Plasmas e Fusao Nuclear,Instituto Superior Technico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Phillip Santos Silva (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Phillip Santos Silva (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Phillip Santos Silva (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Prosenjit Santra (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Benjamin Santraine (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Alessia Santucci (ENEA, Via E. Fermi 45, 00044 Frascati, Italy)

Alessia Santucci (ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P4.150 Heavy water decontamination tests through a Pd-membrane reactor

A. Santucci (ENEA, Frascati, Italy)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Javier Sanz (Energy Engineering Department, ETSII, UNED, Madrid, Spain)

Co-author in P2.142 Propagation of decay gamma source uncertainties to dose rate in SDR calculations with R2SUNED

J. Sanz (Universidad Nacional de Educación a Distancia (UNED, C. Juan del Rosal, 12, 28040 Madrid, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Javier Sanz (Departamento de Ingenieria Energetica, UNED, 28040 Madrid, Spain)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

Javier Sanz (Departamento de Ingeniería Energética, Universidad de Educación a Distancia, Madrid, Spain)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Javier Sanz (Power Engineering Department, Uned, Juan del Rosal, 12 28040 Madrid, Spain)

Co-author in P1.200 Radiological impact mitigation of waste coming from the European Fusion Reactor DCLL DEMO

Biswanath Sarkar (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

A. Sarrionandia-Ibarra (Nuclear Engineering and Fluid Mechanics, University of the Basque Country (UPV/EHU), Bilbao, Spain)

Co-author in P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi

E. Sartori (Consorzio RFX, Padova, Italy)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Filippo Sartori (Fusion for Energy, 08019 Barcelona, Spain)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Emanuele Sartori (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Emanuele Sartori (Consorzio RFX, Padua, Italy)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Roberta Sartori (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

Filippo Sartori (Fusion for Energy, Fusion For Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P1.023 Implementation of the SPIDER Central Interlock

Filippo Sartori (Fusion For Energy, c/ Josep Pla, nº 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona, Spain)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Nobuhiko Sarukura (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Yatinkumar Sarvaiya (Quality Assurance, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints

Dima Sarychev (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Tadayuki Sasajima (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Kazuya Sasaki (Course of Mechanical Engineering, Tokai University, Kanagawa, Hiratsuka, Japan)

Co-author in P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density

Kazuya Sasaki (Prime Mover Engineering, School of Engineering, Tokai University, Hiratsuka, Kanagawa, Japan)

Co-author in P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization

Shin-ichi Satake (Applied Electronics, Tokyo University of Science, Katsushika-ku, Tokyo, Japan)

Co-author in P1.156 DNS of Turbulent Heat Transfer in pipe flow via MPI+OpenMP for multi-CPU

Guruparan Satheeswaran (Forschungszentrum Jülich GmbH, IEK-4 Plasmaphysik, Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Guruparan Satheeswaran (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

Kohnosuke Sato (Chubu Electric Power Co. lnc., 20-1, Kitasekiyama, Ohdaka-cyo, Midori-ku, Nagoya-shi, Aichu, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Katsumi Sato (Department of Blanket Systems Research, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.152 Effect of halogenated gas on detritiation efficiency of the detritiation system

Satoshi Sato (Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, Japan)

Co-author in P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS

Satoshi Sato (Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS

Katsumi Sato (Department of Blanket Systems Research, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan)

Co-author in P4.168 Improvement of quantitative analysis method of tritium using hydrophobic catalyst

Satoshi Sato (Fusion Neutronics Group Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-4 Shirakatashirane, Tokai-mura, Naka-gun, Ibaraki-ken, Japan)

Co-author in P3.121 Integral experiments of neutron transport in blanket module with hydrogen ion beam

Kohnosuke Sato (Chubu Electirc Power Co. Inc., 20-1, Kitasekiyama, Ohdaka, Aichi, Japan)

Co-author in P4.118 Retention and transmission properties of deuterium in tungsuten by the divertor simulator TPD-Sheet IV

Olivier Sauter (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Olivier Sauter (CRPP, EPFL, Lausanne, Switzerland)

Co-author in P2.044 Plasma internal profile control using IDA-PBC: Application to TCV

Olivier Sauter (École Polytechnique Fédérale de Lausanne, Swiss Plasma Center SPC-EPFL, Lausanne, Switzerland)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Olivier Sauter (École Fédérale Polytechnique de Lausanne (EPFL), Swiss Plasma Center (SPC), Lausanne, Switzerland)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Patrick Sauvan (Universidad Nacional de Educación a Distancia (UNED), C/ Juan del Rosal 12, Madrid, Spain)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Patrick Sauvan (Energy Engineering Department, ETSII, UNED, Madrid, Spain)

Co-author in P2.142 Propagation of decay gamma source uncertainties to dose rate in SDR calculations with R2SUNED

P. Sauvan (Universidad Nacional de Educación a Distancia (UNED, C. Juan del Rosal, 12, 28040 Madrid, Spain)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Alan Savan (Institute for Materials, Ruhr-Universität Bochum, 44780 Bochum, Germany)

Co-author in P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process

Begona Savoini (Departamento de Física, Universidad Carlos III, Avda de la Universidad, 30 28911-Leganés, Spain)

Co-author in P1.101 Characterization of the particles dispersion in W-Ti and W-V alloys by SANS

Begona Savoini (Physics, Universidad Carlos III de Madrid, Avd. Universidad 30, 28911 Leganes-(Madrid), Spain)

Co-author in P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes

Laura Savoldi (NEMO group, Dipartimento Energia, Politecnico di Torino, 10129 Torino, Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Laura Savoldi (Politecnico di Torino, Torino, Italy)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Laura Savoldi (Dipartimento Energia, Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Torino , Italy)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Laura Savoldi (Energy Department, Politecnico di Torino, Torino, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO
Co-author in P3.080 Performance analysis of ITER CSI coil and conductor 1A of the ITER CSMC

Laura Savoldi (NEMO Group, Dipartimento Energia, Politecnico di Torino, Torino, Italy)

Co-author in P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL

Yogesh Saxena (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Aaron Sayer (Process Engineering, Materion Beryllium and Composites, Elmore, OH, United States)

Co-author in P4.114 Critical processing considerations for ITER first wall beryllium tiles

M. Scannapiego (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Andrea Scarabosio (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.081 Pressure gauge filament for neutral gas density measurement using alternating current as source power

Andrea Scarabosio (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Jorg Schacht (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Jorg Schacht (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

Joerg Schacht (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Jorg Schafer (PVA Industrial Vacuum Systems GmbH, Im Westpark 10-12, 35435 Wettenberg, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Josef Schaffler (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.037 Helium neutral beam injection into ASDEX Upgrade

Gerd Schall (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Michael Schandrul (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Kurt Schaubel (ITER CS Project, General Atomics, San Diego, California, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Matthias Scheider (W7-X Operation, Max-Planck-Institut for Plasmaphysics, Greifswald, Germany)

Co-author in O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X

Theo Schere (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Theo Scherer (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Theo Scherer (Institute for Applied Materials - Applied Materials Physics (IAM-AWP), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

B.W. Schießl (Department of Physics, Technical University of Denmark, Lyngby, Denmark)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Christian Schlatter (SPC, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Georg Schlindwein (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Georg Schlindwein (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Georg Schlindwein (INR-MET, KIT, Karlsruhe, Germany)

Co-author in P3.145 Review of Hydrogen Isotopes Transport Parameter

Karsten Schluter (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Martin Schmid (Institute of Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components

Martin Schmid (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Martin Schmid (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Fred Schmidt (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Bernd Sebastian Schneider (Institute for Ion Physics and Applied Physics, University of Innsbruck, Technikerstraße 25/3, 6020 Innsbruck, Austria)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Matthias Schneider (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.093 Commissioning of the Wendelstein 7-X Quench-Detection-System

Hans-Christian Schneider (Institute for Applied Materials, Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels

K. Schoepf (University of Innsbruck, Innsbruck, Austria)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

K. Schoepf (University of Innsbruck, Fusion@Österreichische Akademie der Wissenschaften, Innsbruck, Austria)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

K. Schoepf (University of Innsbruck, Kegelgasse 27/13, Wien, Austria)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Marek Scholz (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Marek Scholz (Department of Radiation Transport Physics, Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN), Krakow, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

Sabine Schreck (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Sabine Schreck (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Roman Schrittwieser (Institute for Ion Physics and Applied Physics, University of Innsbruck, Technikerstraße 25/3, 6020 Innsbruck, Austria)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Mathias Schulke (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Werner Schulmeyer (PLANSEE SE, 6600 Reutte, Austria)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Uwe Schultz (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Eugenio Schuster (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, United States)

Co-author in P3.039 Model-based optimal scenario planning in EAST
Co-author in P3.040 Nonlinear burn control in tokamaks using In-vessel coils
Co-author in P3.041 Nonlinear sliding mode control of the current density profile in tokamaks

Eugenio Schuster (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, PA, United States)

Florian Schwab (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Florian Schwab (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Bernd Schweer (LPP, ERM/KMS, 1000 Brussels, Belgium)

Co-author in P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility

Bernd Schweer (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Bernd Schweer (Institut für Energie- und Klimaforschung - Plasmaphysik, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation

T. Scoville (DIII-D, General Atomics, San Diego, CA, United States)

Co-author in P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D

J.T. Scoville (DIII-D National Fusion Facility, General Atomics, San Diego, United States)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

Bernd Sczepaniak (Galvano-T GmbH, Raiffeisenstraße 8, 51570 Windeck, Germany)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Jose Antonio Sebastian (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Kamil Sedlak (Swiss Plasma Center, EPFL, Villigen PSI, Switzerland)

Co-author in P1.086 Cost Estimate for the Toroidal Field Coil System of DEMO
Co-author in P1.087 Thermal-Hydraulic and Quench Analysis of the DEMO Toroidal Field Winding Pack WP1

Kamil Sedlak (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Till Sehmer (ITER Technology & Diagnostics, Max-Planck-Institut for Plasmaphysics, Garching b. München, Germany)

Co-author in O3A.2 Current status of the design of the ITER bolometer diagnostic

Kenji Sekiguchi (College of Engineering, Ibaraki University, Hitachi, Ibaraki, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Vladimir Semenov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Luigi Semeraro (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Pratibha Semwal (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Dong-cheol Seo (National Fusion Research Institute (NFRI), Daejeon Yuseong-gu, South Korea)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

Woo-Kyung Seol (Korea Institute of Materials Science (KIMS), Changwon, South Korea)

Co-author in O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels

Woo-Kyoung Seol (Korea Institute of Materials Science, Changwon, South Korea)

Co-author in P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels

Changrae Seon (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Chang Rae Seon (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

Changrae Seon (Diagnostics team, ITER Korea, ITER Korea, National Fusion Research Institute, 169-148 Gwahak-ro, Yuseong-gu, Daejeon 34133, South Korea)

Co-author in P3.054 ITER Diagnostic Shutters

Taesik Seong (Department of Physics, POSTECH, Pohang, Gyeongbuk, South Korea)

Co-author in P2.033 Mode Converters for Low-loss Transmission-line of KSTAR LHCD system

Taesik Seong (POSTECH, Pohang, Gyeongbuk, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Gennady Sergienko (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Jülich, Germany)

G. Sergienko (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, UK, Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung – Plasmaphysik, 52425 Jülich, Germany)

Co-author in I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall

Gennady Sergienko (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Antonis Sergis (Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom)

Co-author in P1.019 Measurement of flow velocity during natural convection in nanofluids

G. Serianni (Consorzio RFX, Padova, Italy)

Co-author in P4.039 Inverse heat flux evaluation from thermographic measurements in SPIDER

Gianluigi Serianni (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Gianluigi Serianni (Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127, Padova, Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Arkady Serikov (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Karlsruhe, Germany)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Arkady Serikov (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics

Luigi Serio (CERN, Meyrin, Switzerland)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

Hisashi Serizawa (Joining and Welding Research Institute, Osaka University, Suita, Osaka, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

David Sestak (Institute of Plasma Physics at the Czech Academy of Science, Tokamak Department, Za Slovankou 1782/3, 182 00 Prague 8, Czech Republic)

Co-author in P1.014 Tokamak COMPASS-Upgrade support structure study

Andreja Sestan (Center for Electron Microscopy and Microanalysis, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Fabien Seyvet (Fusion for Energy, Barcelona, Spain)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Stefano Sgobba (CERN, Geneva, Switzerland)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

Aqsa Shabbir (Applied Physics Department, Ghent University, B-9000 Gent, Belgium;Max Planck Institute for Plasma Physics, D-85748 Garching, Germany)

Co-author in P3.050 Physical characterization of the JET operational space regarding EMLs by means of discriminant analysis

Jevgeni Shablonin (Institute of Physics, University of Tartu, Tartu, Estonia)

Co-author in P2.190 Spinel based optical materials for fusion applications

Oleg Shagniev (Mechanics and Control, Peter the Great St.Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

Oleg Shagniev (Mechanics and controls, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Polytechnicheskaya St. 29-1, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Pankil R. Shah (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Leiming Shang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China, Hefei, Anhui, China)

Co-author in P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System

Marat Sharafutdinov (Institute of Solid State Chemistry and Mechanochemistry, 18 Kutateladze street, Novosibirsk, 630128, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Lalit Sharma (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Manika Sharma (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

L. K. Sharma (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Rajiv Sharma (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Atish L. Sharma (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Dinesh Kumar Sharma (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Manika Sharma (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Sanjeev K. Sharma (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Aashoo Sharma (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

Ridhima Sharma (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001, Lisbon, Portugal)

Co-author in P4.065 90 degrees cylindrical energy analyzer for the plasma potential fluctuations measurements on the tokamak ISTTOK

Nicolai Shatil (JSC «NIIEFA», St.Petersburg, Russian Federation;Alphysica GmbH, Karlsruhe, Germany)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

R. Shaw (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Lev Shekhtman (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Dmitry Shelukhin (NRC Kurchatov Institute , , Moscow, 123182, Akademika Kurchatova sq. 1, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Alastair Shepherd (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Yue-Jiang Shi (Department of Nuclear Enigneering, Seoul National University, Seoul, South Korea)

Co-author in P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST

Z.B. Shi (Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Bo Shi (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China;Science Island Branch of Graduate School, University of Science and Technology of China, Hefei, China;Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Shanshuang Shi (Lab of Intelligent Machines, Lappeenranta University of Technology, Lappeenranta, Finland;Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Y.J. Shi (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Zongqian Shi (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Zongqian Shi (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Yusuke Shibama (JAEA, Ibaraki 311-0193, Japan)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Yusuke Shibama (Department of Tokamak System Technology, Japan Atomic Energy Agency, Mukouyama Naka-shi IBARAKI, Japan)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Naoki Shibata (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Masayuki Shibuya (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Igor V. Shikhovtsev (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Igor Shikhovtsev (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Alexander Shilov (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Hee-Jin Shim (ITER Korea, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.125 Investigation on feasibility of cleanliness assessment using test sample for ITER blanket shield block

Heejin Shim (Blanket Technology Team, National Fusion Research Institude, DAEJON, South Korea)

Co-author in P2.143 Investigation and Optimization of Molybdenum Disulfide Parameters for Low Friction Coating

Katsuhiro Shimada (Naka Fusion Institute, JAEA, Mukouyama, Naka-si, Ibaraki-ken, Japan)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Katsuhiro Shimada (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Japan)

Co-author in P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA

Katsuhiro Shimada (JT-60 Power Supply and Control Group, Japan Atomic Energy Agency (JAEA), Naka, Japan)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Katsuhiro Shimizu (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Jonathan Shimwell (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.159 Coupled neutronic and engineering analysis of the Helium Cooled Pebbled Bed with Be12Ti

Chang Ho Shin (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Kiyoto Shin-mura (Prime Mover Engineering, School of Engineering, Tokai University, Hiratsuka, Kanagawa, Japan)

Co-author in P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization

Kiyoto Shin-mura (Course of Mechanical Engineering, Tokai University, Kanagawa, Hiratsuka, Japan)

Co-author in P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density

H. Shirai (JT-60SA Project Team, JAEA, 801-1 Mukoyama, Naka, Ibaraki 311-0193, Japan)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Alexander Shmakov (Boreskov Institute of Catalysis, 5 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Sakurada Shodai (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Andrey Shoshin (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Robin Shuff (Remote Handling Project Team, Fusion For Energy, Barcelona, Spain)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

Saito Shuichi (Applied Electronics, Tokyo University of Science, Katsushika-ku, Tokyo, Japan)

Co-author in P1.156 DNS of Turbulent Heat Transfer in pipe flow via MPI+OpenMP for multi-CPU

Kamio Shuji (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Braj Kishor Shukla (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Braj Shukla (ECRH, Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.031 Recent results on ECR assisted plasma start-up, current drive and discharge cleaning in SST-1

Anurag Shyam (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

Marc Sibilia (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Romain Sibois (Remote Operation and Virtual Reality, VTT Technical Research Centre of Finland, Tampere, Finland)

Co-author in P3.142 Reliability prediction method for DEMO divertor remote maintenance concepts using stochastic Petri nets

Scott Siburn (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems

Thomas Sieber (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Udo Siefken (Louis Renner GmbH, Schützenstraße 7, 85221 Dachau, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Bernhard Sieglin (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Jacqueline Signoret (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Scott Silburn (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Scott Silburn (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in O4A.1 Response of the imaging cameras to hard radiation during JET operation

Miguel Silva (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Joao Silva (A. Silva Matos, Apartado 8, 3740-809, Sever do Vouga, Portugal)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

Antonio Silva (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Antonio Silva (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, P-1049-001 Lisboa, Portugal)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Antonio Silva (Instituto de Plasmas e Fusão Nuclear, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.052 Performance assessment of critical waveguide bends for the ITER in-vessel plasma position reflectometry systems

Miguel Silva (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

A. Silva (Instituto de Plasmas e Fusão Nuclear, IST, 1037-001 Lisboa, Portugal)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Antonio Silva (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

Paola Simionato (Consorzio RFX, Padova, Italy)

Paola Simionato (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Muriel Simon (Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona, Spain)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Muriel Simon (Fusion For Energy, c/o Josep Pla 2, 08019 Barcelona, Spain)

Muriel Simon (Fusion For Energy, Barcelona, Spain)

Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Muriel Simon (Fusion for Energy, Josep Pla 2, 08019 Barcelona, Spain)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Alessandro Simonetto (Istituto di Fisica del Plasma "Piero Caldirola", Consiglio Nazionale delle Ricerche, via Cozzi 53, 20125 Milano, Italy)

Co-author in P3.075 Preliminary assessment of ex-vessel waveguides for the ITER Plasma Position Reflectometer

Alain Simonin (CEA-IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Stefan Simrock (ITER Organization, St. Paul-lez-Durance, France)

Co-author in P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers

Stefan Simrock (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Aditya Singh (Cooling Water System, ITER-India, Institute For Plasma research, Bhat, Near Indira Bridge, Gandhinagar, Gujarat, India)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

R. Singh (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Narindar Pal Singh (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

Raghuraj Singh (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

N. P. Singh (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Aditya Singh (Cooling Water System , ITER-India Institute for Plasma Research, GANDHINAGAR, India)

Co-author in P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping

Mahendrajit Singh (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Akhilesh Singh (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Adrianus Sips (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;European Commission, Brussels, Belgium)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Adrianus C. C. Sips (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;European Commission, Brussels, Belgium)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Adrianus C. C. Sips (Jet Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;European Commission, B-1049 Brussels, Belgium)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

A. Sips (JET Exploitation Unit, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;European Commission, Brussels, Belgium)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Marco Siragusa (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

Ugo Siravo (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015, Lausanne, Switzerland)

Co-author in P3.067 Embedded control systems for gyrotrons applications based on NI solutions

Ugo Siravo (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Ugo Siravo (SB-SPC, EPFL, Lausanne, Switzerland)

Co-author in P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak

Ugo Siravo (Swiss Plasma Center, Lausanne, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

Ugo Siravo (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Ugo Siravo (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland)

Co-author in P3.029 EMC improvement of an ECH power supplies system at TCV

Antoine Sirinelli (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Fabien Siroti (Angelantoni Test Technologies (ATT), Massa Martana (PG), Italy)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Filip Siska (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Filip Siska (Institute of Physics of Materials, The Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications

Sree Sistla (Lehrstuhl für Werkstoffanwendungen im Maschinenbau, RWTH Aachen, 52062 Aachen, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Luca Sita (OCEM Energy Technology srl, Via Della Solidarietà 2/1, 40056 Valsamoggia (BO) , Italy)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Luca Sita (OCEM Energy Technology, Via della Solidarietà, 2-1/40056 Valsamoggia (BO), Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Mazhyn Skakov (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Mazhyn Skakov (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Robert Skilton (Remote Applications in Challenging Environments, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Robert M. Skilton (Remote Applications in Challenging Environments (RACE), UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in P4.138 Status and Developments of the MASCOT telemanipulator system for JET Remote Maintenance

Konstantin Skladnov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Radek Skoda (Department of Energy Engineering, Czech Technical University In Prague, Zikova 4, 166 36 Prague, Czech Republic)

Co-author in P2.111 Optimization of the Electron Beam Irradiation at the HELLCZa Experiment

Dmitry Skovorodin (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Petr Sladek (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Praha 8, Czech Republic)

Co-author in P1.051 Signal processing for the extreme environment Hall sensors

Miroslav Smid (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Matthew Smiley (General Atomics MFE, san diego, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Matthew Smiley (General Atomics, P.O. Box 85608, San Diego, CA 92186-5608, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Alexander Smirnov (Mechanics and Control, Peter the Great St.Petersburg Polytechnic University, Saint Petersburg, Russian Federation)

Co-author in P2.133 Engineering analyses of the upper vertical neutron camera of ITER

A. Smirnov (Tri Alpha Energy, Inc, Rancho Santa Margarita, CA 92688, United States)

Co-author in P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment

Mark Smith (Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

J. Smith (ITER CS Project, General Atomics, San Diego, California, United States)

Co-author in P3.081 The ITER Central Solenoid Module final test facility*

Mark Smith (Diagnostics, US-ITER, 1055 Commerce Park Dr #1, Oak Ridge, TN 37830, United States)

Co-author in P3.054 ITER Diagnostic Shutters

George Smith (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

George D. W. Smith (Tokamak Energy, Culham Innovation Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.107 Helium ion irradiation of tungsten carbide neutron shields

M. Smith (Lawrence Livermore National Laboratory, Livermore, California, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Keith Smith (Materion Beryllium and Composites Elmore, OH, United States)

Co-author in P4.114 Critical processing considerations for ITER first wall beryllium tiles

Lance L. Snead (Massachusetts Institute of Technology, NW-12, Rm 212, Cambridge, MA 02139, United States)

Co-author in P1.106 Design of high-strength, high-conductivity, creep-resistant Cu alloys for fusion high heat flux structures

Joseph Alan Snipes (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Joe Snipes (ITER Organization, St. Paul-Lez-Durance, Cadarache, France)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

L. Snoj (Reactor Physics Department, Jozef Stefan Institute, SI-1000 Ljubljana, Slovenia, Slovenia)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Maruyama So (ITER Organization, Route de Vinon sur verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.008 Preliminary design of local magnetic shield for solenoid valve in FPSS of ITER gis

Sorin Soare (ICIT Rm. Valcea, Ramnicu Valcea, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

S. Soare (Institute of Atomic Physics, Bucharest, Romania)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Sorin Soare (Institute of Atomic Physics, Magurele, Ilfov, Romania;National R&D Institute for Cryogenics and Isotopic Technologies, Ramnicu Valcea, Romania)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Giulia Sobrero (NEMO group, Dipartimento Energia, Politecnico di Torino, 10129 Torino, Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Nicolae Sofilca (National Institute for Cryogenics and Isotopes Technologies - ICSI, Rm. Valcea, Romania)

Co-author in P4.156 Investigation of some critical scenarios due to various failures of ICSI Cryogenic Distillation System

Michail Sokolov (National Research Centre «Kurchatov Institute», Moscow, Russian Federation)

Co-author in P2.045 Architecture and platform of plasma control system T-15

Alfonso Soleto (Fusion National Laboratory, Ciemat, Avenida Complutense 40, 28040 Madrid, Spain)

Co-author in O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section

Alfonso Soleto (National Laboratory for Magnetic Fusion, CIEMAT, Madrid, Spain)

Co-author in P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section

Alfonso Soleto (Laboratorio Nacional de Fusión (LNF), Centro de Investigaciones Tecnológicas, Medioambientales y Tecnológicas (CIEMAT), Av. Complutense 40, 28040 Madrid, Spain)

Co-author in P3.075 Preliminary assessment of ex-vessel waveguides for the ITER Plasma Position Reflectometer

Alfonso Soleto (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Vladimir Solokha (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Roman Solomatin (NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P3.124 First experiments with tungsten limiter on the T-10 tokamak

Alexander Solopeko (GKMP group, Bryansk, Russian Federation)

Co-author in P1.094 The preassembly of the tokamak T-15MD magnet system

Valery Solovey (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Youji Someya (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Youji Someya (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Youji Someya (Sector of fusion research and development, Japan Atomic Energy Agency, Kamikita-gun, Aomori, Japan)

Co-author in P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor

Youji Someya (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Soo-hyun Son (National Fusion Research Institute (NFRI), Daejeon Yuseong-gu, South Korea)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

Dashrath P. Sonara (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

P. Sonato (Consorzio RFX, Padova, Italy)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Piergiorgio Sonato (Consorzio RFX, I-35127 Padova, Italy)

Co-author in P2.007 The DTT device: systems for heating

Piergiorgio Sonato (Department of Industrial Engineering, University of Padova, Via Venezia, 1 35131 Padova, Italy)

Co-author in P4.021 Multi-design innovative cooling research & optimization (MICRO):novel proposals for high performance cooling in DEMO

Piergiorgio Sonato (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Piergiorgio Sonato (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P2.144 Application of the VTTJ cold junction technique to fusion reactor relevant geometry and materials

Piergiorgio Sonato (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

Jing Song (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER

Jaehyun Song (Advanced Engineering Division, NFRI, Daejeon, South Korea)

Co-author in P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor

Nak-hyung Song (Vacuum & cryogenic engineering team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.002 Development of the new KSTAR helium distribution box

Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.015 Integration design platform of CFETR

Inho Song (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

J. H. Song (NFRI, Daejeon, South Korea)

Co-author in P4.090 An assessment of axial pre-compression for the KSTAR central solenoid

Nak-Hyung Song (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system

Yuntao Song (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Yuntao Song (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd, China)

Co-author in P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application

Jaehyun Song (Advanced Technology Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.006 Development of pellet injection system for KSTAR

Xianming Song (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Nak Hyoun Song (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

J.H. Song (National Fusion Research Institute, Daejeon, South Korea)

Co-author in P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube

Gang Song (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Jing Song (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Yong Song (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Inho Song (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France, France)

Co-author in P3.087 Type Tests of Switches for the ITER Coil Power Supply System

Yuntao Song (Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China;Schoole of Nuclear Science and Technology, University of Science and Technology of China, Jinzhai Road 96, 230026, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Yuntao Song (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui, China;School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei 230026, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Zhiquan Song (Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031, P.O. Box 1126, Hefei, Anhui Province, 230031, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

Yuntao Song (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Yuntao Song (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, China)

Co-author in P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm

Jigneshkumar Soni (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

D. Soni (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Jignesh Soni (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Aleksey V. Sorokin (Budker Institute of Nuclear Physics SB RAS, 630090 Novosibirsk, Russian Federation)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Carlota Soto (Departament of Materials, CEIT-IK4, Paseo Manuel Ladrizábal 15, E-20018 San Sebastián, Spain;Tecnun, University of Navarra, Paseo de Manuel Lardizábal 13, E-20018 San Sebastian, Spain)

Co-author in O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests

Jorge Sousa (Instituto Superior Técnio, Instituto de Plasmas e Fusão Nuclear, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Jorge Sousa (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics
Co-author in P3.063 EPICS device support for ATCA Board with hotplug capabilities

Jorge Sousa (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O4A.3 A control and data acquisition platform for critical systems

Jorge Sousa (IPFN/IST, Instituto Plasmas Fusao Nuclear, Lisboa, Portugal)

Co-author in P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation

Jorge Sousa (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems

Jorge Sousa (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av Rovisco Pais, P-1049-001 Lisboa, Portugal)

Co-author in P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems

J. Sousa (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1004-001 Lisboa, Portugal)

Co-author in P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera

Carlo Sozzi (IFP-CNR, via Cozzi, 53 - 20115 Milan, Italy)

Co-author in P2.007 The DTT device: systems for heating

Carlo Sozzi (Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR, Milano, Italy)

Co-author in P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission

Carlo Sozzi (Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR, via Cozzi 53, 20125 Milano, Italy)

Co-author in P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA

Carlo Sozzi (Istituto di Fisica del Plasma, CNR, Milano, Italy)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Peter Spaeh (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Gandolfo Alessandro Spagnuolo (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.130 Identification of Blanket design points using an integrated multi-physics approach

Gandolfo Alessandro Spagnuolo (KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.145 Design status of DEMO blanket primary heat transfer system

Ivan Spassovsky (Fusion Department, ENEA, Frascati, Italy)

Co-author in P4.023 Progress on the ENEA 500 kW, 250 GHz CARM design

Ivan Spassovsky (FSN - Fusion Physics Division, ENEA, Frascati (RM), Italy)

Co-author in P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide

Ruben Specogna (DIEGM, Università di Udine, Via delle Scienze 206, Udine, Italy)

Co-author in P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade

Ruben Specogna (DPIA, University of Udine, Udine, Italy)

Co-author in P4.045 Comparison of three methods for the solution of eddy current problems in fusion devices

Ruben Specogna (DPIA, Università di Udine, via delle Scienze, 206, Italy)

Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Giancarlo Spigo (CERN, Geneva, Switzerland)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Alexander Spitsyn (Complex physical and chemical technologies, National Research Center "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P1.150 D-T fuel system of DEMO-FNS tokamak with tritium breeding blanket

Monica Spolaore (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Anett Spring (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Anett Spring (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Anett Spring (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Annette Spring (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Wendelsteinstraße 1, D-17491 Greifswald, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

B. V. V. S. N. N. P. Sridhar (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

G. Srikanth (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

R. Srinivasan (Institute for Plasma Research, Gandhinagar, India)

Co-author in P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor

G. Stables (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Reinhold Stadler (Max-Planck_Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements

Reinhold Stadler (Max-Planck-Institut für Plasmaphysik, Garching bei Muenchen, Germany)

Co-author in P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event

Reinhold Stadler (Max-Planck-Institut für Plasmaphysik, Garching b. München, Germany)

Co-author in P2.124 Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X

I. E. Stamatelatos (Institute of Nuclear and Radiological Sciences, Athens, 15310, Greece)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Ion E. Stamatelatos (Institute of Nuclear and Radiological Sciences, Energy, Technology and Safety, National Centre for Scientific Research Demokritos, Athens, Greece)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Z. Stancar (Slovenian Fusion Association, Jozef Stefan Institute, Ljubljana, Slovenia)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Cristian Stancu (National Institute for Laser, Plasma and Radiation Physics, 409 Atomistilor Street, Magurele, Romania)

Co-author in P3.108 Production of tungsten particles from a radiofrequency plasma jet

Cristian Stancu (National Institute for Laser, Plasma and Radiation Physics, Atomistilor Street 409, Magurele, Ilfov , Romania)

Co-author in P2.176 “FAST brazing” technology for W multi-metal laminates

P.C. Stangeby (Institute for Aerospace Studies, University of Toronto , Toronto, Canada)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Peter C. Stangeby (University of Toronto Institute for Aerospace Studies, Toronto, M3H 5T6, Canada)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

G. Stankunas (Lithuanian Energy Institute, Laboratory of Nuclear Installation Safety, Breslaujos str, 44403 Kaunas, Lithuania)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Gediminas Stankunas (Laboratory of Nuclear Installation Safety, Lithuanian Energy Institute, Kaunas, Lithuania)

Co-author in P1.203 Neutron activation in heat transfer systems of nuclear fusion devices

Gediminas Stankunas (Lithuanian Energy Institute, Laboratory of Nuclear Installation Safety, Breslaujos str, LT-44403 Kaunas, Lithuania)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

Fabio Starace (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Fabio Starace (ENEA, Centro Ricerche Frascati, Italy, Frascati, Italy)

Co-author in P2.010 The DTT device: general layout

Ronald Starz (Institute for Ion Physics and Applied Physics, University of Innsbruck, Technikerstraße 25/3, 6020 Innsbruck, Austria;Mechatronic Department, Management Center Innsbruck, Maximilianstraße 2, 6020 Innsbruck, Austria)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Paul-Martin Steffen (Institute of Energy and Climate Research – Nuclear Waste Management and Reactor Safety (IEK-6), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions

Jan Stepanek (Faculty of Mechanical Engineering, Department of Energy Engineering, Czech Technical University In Prague, Prague 6, Czech Republic)

Co-author in P2.110 Design of the divertor targets shielding frame of the HELCZA experimental complex

Jan Stepanek (Department of Energy Engineering, Czech Technical University In Prague, Zikova 4, 166 36 Prague, Czech Republic)

Co-author in P2.111 Optimization of the Electron Beam Irradiation at the HELLCZa Experiment

Jan Stepanek (Department of Energy Engineering, Czech Technical University In Prague, Zikova 4, 166 36 Prague 6, Czech Republic)

Co-author in P2.200 Effective water cooling of very hot surfaces during the LOCA accident

Boris Stepanov (EPFL-SPC, Villigen, Switzerland)

Co-author in P1.085 DEMO-EUROFusion Tokamak, design of TF coil inter-layer splice joint

Boris Stepanov (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Manoah Stephen (Remote Handling Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards

Adam Stephen (CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Robert Stieglitz (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, KIT, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.197 EU DEMO safety and operating requirements. Issues and possible solutions

M.P. Stijkel (Research and Innovation, NRG, Petten, Netherlands)

Co-author in P3.161 Post irradiation examination of High Dose irradiated Beryllium (HIDOBE-02) in the High Flux Reactor

Jorg Stober (Max Planck Institute for Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade

Joerg Stober (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Jan Stockel (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Jaroslav Stoklasa (Nuclear Fuel Cycle, Research Centre Rez, Husinec - Rez 130, 250 68, Czech Republic)

Co-author in P1.205 Development and identification of detritiation techniques for DEMO radioactive waste management

Ludek Stratil (Institute of Physics of Materials, The Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications

Ludek Stratil (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

B. Stratton (Princeton Plasma Physics Laboratory, Princeton, New Jersey, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Brentley Stratton (Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543, United States)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Dirk Strauss (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Dirk Strauss (Institute for Applied Materials - Applied Materials Physics (IAM-AWP), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Dirk Strauss (IAM- AWP, Karlsruhe Institute Of Technology, Eggenstein Leopoldshafen, Germany)

Co-author in P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design

Yuri Strebkov (JSC "NIKIET", 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.130 Analysis and experimental justification of electrical connector for ITER blanket module

Yuri Strebkov (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Yuri Strebkov (JSC “NIKIET”, Moscow, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Tobias Strittmatter (Ampegon AG, Turgi, Switzerland)

Co-author in P3.024 Overview of the EU HV Power Supply System for the ITER EC System

H. Strobel (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Dusan Stupar (Research Instruments GmbH, Friedrich-Ebert Str. 1, 51429 Bergisch Gladbach, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Petr Stupka (TEO, Centrum výzkumu Řež, Husinec - Řež, Czech Republic)

Co-author in P4.188 Modelling tritium permeation during PbLi capsule irradiation

Daniel Suarez (Department of Physics, UPC-BarcelonaTech, Barcelona, Spain)

Co-author in P2.164 Liquid metal heat and mass transfer coefficients in vertical ducts with flow channel inserts

Mikhail Subbotin (National Research Centre “Kurchatov Institute”, Moscow, Russian Federation)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation

Mikhail Subbotin (CERN, Geneva, Switzerland;Tokamak Branch, NRC "Kurchatov Institute", Moscow, Russian Federation)

Co-author in P4.202 Preliminary risks analysis of the IGNITOR Project realization phase

Jan Subrt (Institute of Inorganic Chemistry AS CR, 250 68 Rez, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Bassem Sudki (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Bassem Sudki (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland)

Co-author in P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system

Bassem Sudki (EPFL-SPC (Swiss Plasma Center), Lausanne, Switzerland)

Co-author in P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL

Michiharu Sueoka (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Ritesh Sugandhi (Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar- 382 428, Gujarat, India)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Taishi Sugiyama (Graduate school of energy science, Kyoto University, Gokasho,Uji,Kyoto, Japan)

Co-author in P3.121 Integral experiments of neutron transport in blanket module with hydrogen ion beam

C. B. Sumod (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Guangyao Sun (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER

Lujun Sun (Institute of Nuclear Energy Safety Technology (INEST), Hefei, Anhui, China)

Co-author in P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field

Ming Sun (Institute of Nuclear Energy Safety Technology, CAS·FDS Team, No.350, Shushanhu Road, Hefei, Anhui, China)

Co-author in P3.193 Probabilistic safety classification approach for SSCs of fusion reactors

Tengfei Sun (Fusion Center for Scientist, Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel

Guangyao Sun (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Arnis Supe (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Elizabeth Surrey (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in O5A.2 Fusion Reactor Start-up without an External Tritium Source

Elizabeth Surrey (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P1.082 A DEMO relevant long leg divertor with external poloidal field coils

E. Surrey (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Gajendra Suthar (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

Wolfgang Suttrop (E1 - tokamak scenario development, Max Planck institute for plasma physics, Garching, Germany)

Co-author in P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade

Wolfgang Suttrop (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Tsuneo Suzuki (Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata, Japan)

Co-author in P1.020 Fabrication of DLC cone for fast ignition experiment

Takumi Suzuki (Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Takumi Suzuki (Rokkasho Fusion Institute, Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

T. Suzuki (Japan Atomic Energy Agency, Mukouyama, Naka City, Ibaraki, Japan)

Co-author in P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems

Lennart Svensson (ITER Organization, St. Paul Lez Durance Cedex, France)

Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Lennart Svensson (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P1.023 Implementation of the SPIDER Central Interlock
Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Lennart Svensson (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Lennart Svensson (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors

Maxim Sviridenko (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Maksim Sviridenko (JSC “NIKIET”, Moscow, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Vojtech Svoboda (Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University, Brehova 7, 115 19, Prague, Czech Republic)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Emily Swatton (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Svetlana Sycheva (Peter the Great Saint-Petersburg Polytechnic University, St. Petersburg, 195251, Politechnicheskaia 29, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

A. Sykes (Tokamak Energy Ltd, Milton Park, United Kingdom)

Co-author in P1.047 Equilibrium modelling of merging compression startup in a spherical tokamak

Alan Sykes (Tokamak Energy, Oxfordshire, United Kingdom)

Co-author in P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly

Sergei Sytchevsky (JSC «NIIEFA», St.Petersburg, Russian Federation)

Sergei Sytchevsky (JSC "NIIEFA", St. Petersburg, Russian Federation)

Co-author in P4.011 Modelling magnetic effects for steel rebar of tokamak buildings

Tamas Szabolics (Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Sandor Szalardy (FIRCROFT, Lingley House, 120 Birchwood Blvd, Warrington, Cheshire WA3 7QH, United Kingdom)

Co-author in P1.125 In vessel electrical integraton in ITER Tokamak

Tamas Szepesi (RCP RMO, Wigner Institut, Budapest, Hungary)

Co-author in P2.064 Visual diagnostics at Wendelstein 7-X Stellerator

Tamas Szepesi (Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Mark Szutyanyi (Department of Mathematics and Computational Sciences, Szechenyi Istvan University, Gyor, Hungary)

Co-author in P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak

Adam Szydlowski (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

Massimiliano Tacconelli (Walter Tosto, Via Erasmo Piaggio, 66100, Chieti, Italy, Italy)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Naoya Tada (Division of Industrial Innovation Sciences, Graduate School of Natural Science & Technology, Okayama University, Okayama, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Giuseppe Taddia (OCEM Energy Technology srl, Via Della Solidarietà 2/1, 40056 Valsamoggia (BO) , Italy)

Co-author in P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector

Giuseppe Taddia (OCEM Energy Technology, Via della Solidarietà, 2-1/40056 Valsamoggia (BO), Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Giuseppe Taddia (Power Electronics, OCEM Energy Technology, Via della Solidarietà 2/1 - 40056 Valsamoggia (BO), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Lee Taegu (Control team, National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory

Akira Taguchi (Hydrogen Isotope Research Center, University of Toyama, 3190, Gofuku, Toyama-shi, Toyama, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Taehyun Tak (KSTAR Control Research Team, National Fusion Research Institute, Daejeon, South Korea)

Co-author in P3.202 Plasma protection module design of the ITER CIS fast architecture

Suguru Takada (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Koji Takahashi (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Koji Takahashi (Department of ITER Project, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.022 Development of a direct mirror angle detector for ITER EC launchers

Koji Takahashi (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki 311-0193, Japan)

Co-author in P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system

Kazuya Takahata (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies

Haruhiko Takase (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Haruhiko Takase (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Haruhiko Takase (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Mutoh Takashi (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Sadatsugu Takayama (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Manabu Takechi (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Manabu Takechi (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Nobukazu Takeda (Naka Fusion Institute, Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system

Nobukazu Takeda (Fusion Research and Development Directorate, ITER Project Unit, Remote Handling Technology Group, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance

Nobukazu Takeda (Department of ITER Project, Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken, Japan)

Co-author in P4.128 Recovery from failures of ITER Blanket Remote Handling System

Shutaro Takeda (Institute of Advanced Energy, Kyoto University, Uji, Japan)

Co-author in P1.207 Environmental impact of nuclear fusion biomass gasification plant

Yasuhiko Takeiri (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Toshiharu Takeishi (Advanced of Energy Engineering science, kyushu universty, 6-1 kasugakouen kasuga-shi Fukuoka, Japan)

Co-author in P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition

Toshiharu Takeishi (Applied Quantum Physics and Nuclear Engineering, Kyushu University, Fukuoka, Japan)

Co-author in P1.206 Disposal Procedure for contaminated surface of tritium handling facility in the decommissioning operation

Toshikio Takimoto (Tokai University, 4-1-1, Kitakaname, Hiratsuka-shi, Kanagawa, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Toshikio Takimoto (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Chikada Takumi (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Cesare Taliercio (Consorzio RFX, Padova, Italy)

Co-author in P1.023 Implementation of the SPIDER Central Interlock
Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Cesare Taliercio (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Padova, Italy)

Co-author in P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod

Cesare Taliercio (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Michele Tamagnone (Delta-Ti Impianti S.p.A, Rivoli (TO), Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Sigitas Tamulevicius (Institute of Materials Science, Kaunas University of Technology, Barsausko street 59, LT-50131, Kaunas, Lithuania;Department of Physics, Kaunas University of Technology, Studentu street 50, LT-51368, Kaunas, Lithuania)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Hitoshi Tamura (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Yi Tan (Department of Engineering Physics, Tsinghua University, Beijing, China)

Teruya Tanaka (National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu, Japan)

Co-author in P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation

Teruya Tanaka (National Institute for Fusion Science, Toki, Japan)

Co-author in P2.172 Water hydraulic experiment as a simulant for the molten salt blanket with metal powders

Teruya Tanaka (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Teruya Tanaka (National Institute for Fusion Science, Toki, Gifu 509-5292, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Teruya Tanaka (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Victor Tanchuk (JSC "NIIEFA", Saint-Petersburg, Russian Federation)

Co-author in P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils

Victor Tanchuk (Efremov Institute, Saint-Petersburg, Russian Federation)

Co-author in P3.086 Energy dissipating resistors for the ITER switching network units

Changjian Tang (Physics Department, Sichuan university, Chengdu, China;Institute of Fusion Science, School of Physical Science and Technology,Southwest Jiaotong University, Chengdu, China)

Co-author in P3.032 Hybrid-order nonlinear resonant interaction between an Alfvén wave and ions

Hiroyasu Tanigawa (Japan Atomic　Energy　Agency, Rokkasho-mura, Japan)

Co-author in P4.111 Feasibility study of fabrication of large scale mock-up and strength evaluation of HIP joint

Hiroyasu Tanigawa (Fusion Research and Development Directorate, Japan Atomic Energy Agency, 2-166 Oaza-Obuchi-Aza-Omotedate, Rokkasho, Kamikita-gun, Aomori 0393212, Japan)

Co-author in P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy

Hiroyasu Tanigawa (Japan Agency for Quantum and Radiological Science and Technology, 2-166 Omotedate, Obuchi, Rokkasho, Kamikita, Aomori 039-3212, Japan)

Co-author in P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow

Hiroyasu Tanigawa (Research Rokkasho Fusion Institue, Sector of Fusion Research and Development, Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Hiroyasu Tanigawa (JAEA, Rokkasho, Japan)

Co-author in P1.180 Micro-pillar compression test on ion-irradiated F82H

Hiroyasu Tanigawa (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP

Hiroyasu Tanigawa (Japan Atomic Energy Agency, Rokkasho, Aomori 039-3212, Japan)

Co-author in P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h

Hisashi Tanigawa (Sector of fusion research and development, Japan Atomic Energy Agency, Kamikita-gun, Aomori, Japan)

Co-author in P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor

Hiroyasu Tanigawa (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Hisashi Tanigawa (Department of Blanket System Research, Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P3.164 Passive decay heat removal for solid breeder blanket

Hiroyasu Tanigawa (Japan Atomic Energy Agency, Rokkssho, Japan)

Co-author in P1.176 Effect of irradiation hardening on deformation behavior of blanket structures fabricated by F82H

Hiroyasu Tanigawa (Department of Fusion Reactor Materials Research, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.175 Assessment of F82H development status toward DEMO with respect to the existing design code

Hiroyasu Tanigawa (Japan Atomic Enegy Agency, Rokkasho, Aomori, Japan)

Co-author in P1.177 Characterization of F82H HIP joints by acoustic emission

Hiroyasu Taniguchi (Osaka Alloying Works Co.,Ltd, 45-5-9 Shirakata ,Fukui, Japan)

Co-author in P1.081 Development of the bronze processed Nb3Sn multifilamentary wires using Cu-Sn-Zn ternary alloy matrix

Vipul L. Tanna (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Rakesh Tanna (Institute for plasma Research, Gandhinagar, India)

Co-author in P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation

Andrea Tarallo (Department of Industrial Engineering, CREATE - University of Naples Federico II, P.le Tecchio 80, 80125 Napoli, Italy)

Co-author in P2.009 The DTT device: first wall, vacuum vessel and cryostat structure

Andrea Tarallo (CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Mariano Tarantino (ENEA CR Brasimone, Località Brasimone 40032, Camugnano (BO), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Mariano Tarantino (ENEA, Brasimone R.C., 40032 Camugnano, Bologna, Italy)

Co-author in P4.190 Experimental loop and purification system design for corrosion in flowing PbLi

Mariano Tarantino (FSN-ING, ENEA, Camugnano, Italy)

Co-author in P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM

Marco Tardocchi (Istituto di Fisica del Plasma “P. Caldirola”, Consiglio Nazionaledelle Ricerche, Milano, Italy)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Marco Tardocchi (Instituto di Fisica del Plasma "P. cardirola", Consiglio Nazionale delle Richerche, Milano, Italy)

Co-author in P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer

Marco Tardocchi (Istituto di Fisica del Plasma “P. Caldirola”, CNR, Milano, Italy)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

M. Tardocchi (Instituto di Fisica del Plasma “Piero Caldirola”, Milano, Italy)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

M. Tardocchi (Instituto di Fisica del Plasma "Piero Caldirola«, Consiglio Nazionale delle Ricerche, and Dipartimento di Fisica “G. Occhialini”, Università degli studi di Milano Bicocca, Milano, Italy)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

E. Tardocchi (Istituto di Fisica del Plasma CNR, Milano, Italy, Italy)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Alessandro Tassone (Dipartimento di Ingegneria Astronautica, Elettrica ed Energetica, Università di Roma "La Sapienza", Roma, Italy)

Co-author in P2.150 CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module

Alessandro Tassone (DIAEE, Sapienza University of Rome, Corso Vittorio Emanuele II 244, 00186, Roma, Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

George Tavkhelidze (Andronikashvili Institute of Physics, Tamarashvili St. 6, 0186 Tbilisi, Georgia)

Co-author in P1.018 Properties of plasma injected in open magnetic trap from independent UHF source

Gerard Tayeb (Institut Fresnel, Aix-Marseille Université, CNRS, Centrale Marseille, UMR 7249, F-13013, Marseille, France)

Co-author in P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas

Neill Taylor (Culham Centre for Fusion Energy (CCFE), Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P1.197 EU DEMO safety and operating requirements. Issues and possible solutions

Neill Taylor (Culham Centre for Fusion Energy (CCFE), UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Neill Taylor (Culham Centre for Fusion Energy, Abingdon, Oxfordshire, United Kingdom)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Neill Taylor (CCFE, Culham, United Kingdom)

Co-author in P3.127 Initial definition of load conditions in DEMO

N. Taylor (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Irina Tazhibayeva (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Irina Tazhibayeva (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

ASDEX Upgrade Team (Max-Planck-Institut fuer Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

ASDEX Upgrade Team (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

SST-1 Team (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

DIII-D Team (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Elena Tejado (Dpto. de Ciencia de Materiales-CIME, Universidad Politécnica de Madrid, E 28040 Madrid, Spain)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Elena Tejado (Department of Materials Science, Polytechnic University of Madrid, Profesor Aranguren s/n, E-28040 Madrid, Spain)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Sandro Maria Tenconi (Power Electronics, OCEM Energy Technology, Via della Solidarietà 2/1 - 40056 Valsamoggia (BO), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Liliana Teodoros (Cooling Water Section, ITER Organization, Route de Vinon sur Verdon, 13115 St Paul Lez Durance, France)

Co-author in P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions

Dmitry Terentyev (SCK-CEN, Mol, Belgium)

Co-author in P3.105 Microstructural and micro-mechanical changes in tungsten under high flux plasma exposure

David Terranova (Consorzio RFX, Padua, Italy)

Co-author in P2.039 3D magnetic surfaces reconstruction in RFX-mod

Santiago Terron (Fusion for Energy, Barcelona, Spain)

Co-author in P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER

Tanaka Teruya (National Institute for Fusion Science, Toki, Gifu 502-5292 , Japan)

Co-author in P4.189 Monitoring of oxide layer structures in Pb and Pb-Li alloy by electrochemical impedance spectroscopy

Sanna Tervakangas (DIARC-Technology Inc, DIARC Finland, Finland)

Co-author in P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings

Franco Terzi (ASG Superconductors SpA, Corso F.M. Perrone 73 R - Genova, Italy)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Markus Teschke (E1 - tokamak scenario development, Max Planck institute for plasma physics, Garching, Germany)

Co-author in P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade

Markus Teschke (Max-Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils

Markus Teschke (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Seki Tetsuo (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi Gifu, Japan)

Co-author in P3.031 Fault Detection System for ICRF Transmission Line in LHD

Aruna Thakar (Power Supply Group, ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)

Co-author in P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply

A. Thakar (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Dipal Thakkar (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Johannes Thalhammer (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.037 Helium neutral beam injection into ASDEX Upgrade

Prashant L. Thankey (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

the ASDEX Upgrade Team (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

and JET contributors the ASDEX-Upgrade team (See the Appendix of F. Romanelli et al., Proceedings of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russian Federation)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

the COMPASS team (Insitute of Plasma Physics CAS, Za Slovankou 3, Prague, Czech Republic)

Co-author in I2.3 Design of the COMPASS Upgrade Tokamak

group the NB Heating Technology (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

the W7-X Team (Max Planck Institute for Plasma Physics, Wendelsteinstraße 1, 17489 Greifswald, Germany)

Co-author in I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator

the WEST team (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation

Werner Theisen (Ruhr-Universität Bochum, Chair of Materials Technology, 44780 Bochum, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Raphael Thenevin (Bertin Systèmes Instrumentation, Bertin Technologies, Aix-en-Provence, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Hyun Soo Tho (Strategy Division, National Fusion Research Institute, Deajeon, South Korea)

Co-author in P4.205 The Economic Benefits of Big Science R&D Program: With a Focus on KSTAR Program

Noel Thomas (ATMOSTAT, F-94815 Villejuif, France)

D. Thomas (National Physics Laboratory, TW11 OLW Teddington, United Kingdom, United Kingdom)

Co-author in P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer

Fred Thomas (York Plasma Institute, University of York, York, United Kingdom)

Co-author in P3.156 Quantifying TBR uncertainty due to nuclear data in fusion blanket modelling

D.M. Thomas (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Vaughan Thompson (CCFE, Abingdon, United Kingdom)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Henning Thomsen (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Henning Thomsen (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator

Henning Thomsen (Max-Planck Institute of Plasma Physics, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Henning Thomsen (Max-Planck-Institut für Plasmaphysik, , Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator

Henning Thomsen (Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties

Luke Thomson (RACE, UKAEA, Culham, United Kingdom)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

A.S. Thrysøe (Department of Physics, Technical University of Denmark, Lyngby, Denmark)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Manfred Thumm (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Manfred Thumm (IHM, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Kuo Tian (Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES

Kuo Tian (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.172 The test cell configuration under IFMIF-DONES condition

Andrius Tidikas (Laboratory of Nuclear Installation Safety, Lithuanian Energy Institute, Kaunas, Lithuania)

Co-author in P1.203 Neutron activation in heat transfer systems of nuclear fusion devices

Fabio Tieri (Fusion Nuclear Tecnologies, Create Consortium, Via Claudio, 21 Napoli, Italy)

Co-author in P4.195 ASTEC simulations of dust resuspension in fusion containments compared with the “STARDUST” experimental data

Fabio Tieri (Consorzio di Ricerca per l'Energia e le Applicazioni Tecnologiche dell’Elettromagnetismo (CREATE), Via Claudio 21, 80125, Napoli, Italy)

Co-author in P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents

Ioannis Tigelis (Faculty of Physics, National and Kapodistrian University of Athens, Zografou, GR-157 84, Athens, Greece)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Ioannis Tigelis (Faculty of Physics, National and Kapodistrian University of Athens, Athens, Greece)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Petri Tikka (Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Peter Titus (Princeton Plasma Physics Laboratory, Princeton, NJ, United States)

Co-author in P3.158 Breeding Blanket Nuclear Analysis and Nuclear Data Transfer For Multiphysics Analysis Using Attila

Peter Titus (Analysis Branch Mechanical Engineering Division, Princeton Plasma Physics Laboratory, Princeton, NJ, United States)

Co-author in P3.134 Structural Assessments of the KDEMO Blanket Modules

Peter Titus (Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, NJ 08543, United States)

Co-author in P2.167 Numerical Model of Dual-Coolant Lead–Lithium (DCLL) Blanket

Peter Titus (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Peter Titus (Princeton Plasma Physics Laboratory, PO Box 451, MS-38, Princeton, NJ 08543,, United States)

Co-author in P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR

Hiroyuki Tobari (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Hiroyuki Tobari (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Kenji Tobita (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Kenji Tobita (Japan Atomic Energy Agency, Rokkasho, Aomori, Japan)

Co-author in P3.115 Profile analysis of the first wall heat load required for demo blanket concept

Kenji Tobita (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Kenji Tobita (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Kenji Tobita (Sector of fusion research and development, Japan Atomic Energy Agency, Kamikita-gun, Aomori, Japan)

Co-author in P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor

Kenji Tobita (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

N. Tom Todd (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in O5A.2 Fusion Reactor Start-up without an External Tritium Source

V. Toigo (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy)

Co-author in I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility

Vanni Toigo (Consorzio RFX, Padova, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Vanni Toigo (Consorzio RFX, Corso Stati Uniti 4, I-35127, Padova, Italy)

Co-author in P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector

Vanni Toigo (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Vanni Toigo (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete S.p.A.), Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.022 The transmission line for the SPIDER experiment: from design to installation

Hiroshi Tojo (Japan Atomic Energy Agency, Naka, Japan)

Co-author in P1.072 Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic

Masayuki Tokitani (NIFS, Gifu, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Masayuki Tokitani (Department of Helical Plasma Research, National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu, Japan)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

Kazutoshi Tokunaga (Nuclear Fusion Dynamics, RIAM, Kyushu University, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Kazutoshi Tokunaga (RIAM, Kyushu University, 6-1, Kasuga-koen, Kasuga-shi, Fukuoka, Japan)

Co-author in P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST

Shinsuke Tokunaga (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Shinsuke Tokunaga (Japan Atomic Energy Agency, Rokkasho, Kamikita, Aomori, Japan)

Co-author in P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor

Shinsuke Tokunaga (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Panagiotis Tolias (Space and Plasma Physics, KTH Royal Institute of Technology, Teknikringen 31,SE-100 44 Stockholm, Sweden)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Marco Tollin (Consorzio RFX, Padova, Italy)

Co-author in P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER

Boris Tolochko (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Institute of Solid State Chemistry and Mechanochemistry, 18 Kutateladze street, Novosibirsk, 630128, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Sergei Tolstyakov (Ioffe Institute, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P2.137 Divertor Thomson scattering structure integrity report

Sergey Tolstyakov (Ioffe Institute, St.Peterburg 194021, Polytechnicheskaya St. 26, Russian Federation)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

V. Tomarchio (JT-60SA EU-Home Team, Fusion for Energy, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation

Valerio Tomarchio (Fusion for ENergy, Garching bei Munchen, Germany)

Co-author in P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment

Valerio Tomarchio (JT-60 SA European Home Team, Boltzmannstrasse 2, D-85748 Garching, Germany)

Co-author in P2.086 Status of casing manufacturing for JT-60SA toroidal field coils

Giordano Tomassetti (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Matej Tomes (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Sergey Tomilov (JSC “NIKIET”, Moscow, Russian Federation)

Co-author in P2.104 Analysis results of the EHF FW panel’s elements

Kunugi Tomoaki (Kyoto University, C3-d2S06, Kyoto-Daigaku Katsura, Nishikyo-Ku, Kyoto, Japan)

Co-author in P1.156 DNS of Turbulent Heat Transfer in pipe flow via MPI+OpenMP for multi-CPU

Akira Tonegawa (Tokai University, 4-1-1, Kitakaname, Hiratsuka-shi, Kanagawa, Japan)

Co-author in P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma

Akira Tonegawa (Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa, Japan)

Co-author in P4.118 Retention and transmission properties of deuterium in tungsuten by the divertor simulator TPD-Sheet IV

Joseph Tooker (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

Yuji Torikai (Hydrogen Isotope Research Center, University of Toyama, 3190, Gofuku, Toyama-shi, Toyama, Japan)

Co-author in P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure

Alexandre Torre (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Alexandre Torre (CEA, CADARACHE, France)

Co-author in O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility

Alexandre Torre (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Alexandre Torre (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Alexandre Torre (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

H. Torreblanca (General Atomics, San Diego, United States)

Co-author in O2C.3 Development of a high power helicon system for DIII-D

H. Torreblanca (DIII-D National Fusion Facility, General Atomics, San Diego, United States)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

Antonio Torrezan (General Atomics, San Diego, United States)

Co-author in P2.037 Advances in technology and high power performance of the ECH system on DIII-D

Silvano Tosti (ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P4.150 Heavy water decontamination tests through a Pd-membrane reactor

Silvano Tosti (ENEA, Via E. Fermi 45, 00044 Frascati, Italy)

S. Tosti (ENEA, Frascati, Italy)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Matthieu Toussaint (Swiss Plasma Center, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland)

Co-author in P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV

Matthieu Toussaint (Swiss Plasma Center (SPC), École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland)

Co-author in P3.030 Neutral beam heating on the TCV tokamak

Takeshi Toyama (Institute for Materials Research, Tohoku University, Oarai, Ibaraki, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Grzegorz Tracz (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Minh Quang Tran (SPC Swiss Plasma Center (SPC), EPFL, CH-1015 Lausanne, Switzerland)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Minh Quang Tran (Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, CH-1015 Lausanne, Switzerland)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Minh Quang Tran (Swiss Plasma Center (SPC), EPFL, Lausanne, Switzerland)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Minh Quang Tran (SPC, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Jean Marcel Travere (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Jean-Marcel Travere (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

Jean-Marcel Travere (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

A. Travleev (Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Anton Travleev (INR-NK, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Anton Travleev (INR, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D 76344 Eggenstein-Leopoldshafen, Germany)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Anton Travleev (Karlsruhe Institute of Technology, Postfach 3640, 76021 Karlsruhe, Germany, Germany)

Co-author in P1.201 Activation and decay heat analysis of the European DEMO blanket concepts

Wolfgang Treuterrer (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Wolfgang Treutterer (E1, Max-Planck Institute for Plasma Physics, Garching, Garching, Germany)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Wolfgang Treutterer (Tokamak Scenario Development E1, Max Planck Institut fuer Plasmaphysik, Garching, Germany)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Wolfgang Treutterer (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink
Co-author in P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade

Wolfgang Treutterer (Max-Planck-Institut fuer Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

V.S. Tripathi (I-Design Engineering Solutions Ltd., Ubale Nagar, Wagholi Pune, 412207, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Sudhir Tripathi (Divertor & First Wall Technology Development Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.108 Design and development of high pressure high temperature water circulation system for HHFTF

Matej Tripski (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

R.G. Trivedi (IC H&CD, Iter-India, Institute for Plasma Research, Bhat, Gandhinagar - 382428, India)

Co-author in P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig

R.G. Trivedi (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Rajesh Trivedi (ICH&CD,, ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in P4.035 Development of wideband solid state power amplifier for ICH & CD RF source

Marc Troisne (Department of Systems and Structures Modelling, CEA, Gif-sur-Yvette, France)

Co-author in P1.171 Nuclear analysis of the HCLL blanket for the European DEMO

Michele Troulay (CEA Cadarache, Saint Paul lez Durance, France)

Co-author in P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics

Yuriy Trunev (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Christos Tsironis (Electrical and Computer Engineering, National Technical University of Athens, Athens, Greece)

Co-author in P1.030 Physics-based modelling of the ECRH system for MHD control applications

E. Tsitrone (CEA, IRFM, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in I5.2 WEST Project status and Research plan towards ITER risk mitigation

Emanuelle Tsitrone (CEA/IRFM, Saint Paul Lez Durance, France)

Co-author in O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak

Katsuhiko Tsuchiya (QST, Naka, Naka, Ibaraki 311-0193, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Katsuhiko Tsuchiya (Tokamak System Technology, Japan Atomic Energy Agency, Naka Ibaraki, Japan)

Co-author in P2.084 Design of JT-60SA cryodistribution

Katsuyoshi Tsumori (National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan;Department of Fusion Science, The Graduate University for Advanced Studies, Toki, Gifu, Japan)

Co-author in P4.032 Response of H- ions to extraction field in a negative hydrogen ion source

Angelo A. Tuccillo (Dipartimento FSN, ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Angelo Antonio Tuccillo (Dipartimento FSN, ENEA, via E.Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P2.007 The DTT device: systems for heating

A. A. Tuccillo (ENEA, Frascati, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

O. Tudisco (ENEA, Frascati, Italy)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Onofrio Tudisco (FSN, ENEA C.R. Frascati, Via E. Fermi 45, Frascati-Roma, Italy)

Co-author in P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU

Onofrio Tudisco (Dipartimento FSN, ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy)

Co-author in P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer

Andrea Turetta (Progetto Decibel, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Andrew Turner (UK Atomic Energy Authority (CCFE), Culham Science Centre,, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis

A. Turner (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Andrew Turner (Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Ingrid Turner (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Simonetta Turtu (Enea, Frascati, Italy)

Co-author in P2.006 DTT Device: Conceptual design of the superconducting magnet system

Simonetta Turtu' (ENEA, Frascati, Italy;ICAS, Frascati, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO

S. Udgata (I-Design Engineering Solutions Ltd., Ubale Nagar, Wagholi Pune, 412207, India)

Co-author in P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India

Victor Udintsev (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Victor S Udintsev (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Victor Udintsev (TED, Diagnostic Division, ITER Organization, Cadarache, France)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Victor S. Udintsev (Port Plug & Diagnostics, ITER, Vinon-sur-Verdon, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Victor Udintsev (TED, Diagnostic Division, ITER Organization, Caradache, France)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Yoshio Ueda (Division of Electrical, Electronic and Information Engineering, Graduate School of Engineering Osaka University, Osaka, Japan)

Co-author in P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux

Yoshio Ueda (Osaka university, Osaka, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Yoshio Ueda (Graduate School of Engineering, Osaka University, Osaka, Japan)

Co-author in P3.153 Sensitivity analysis of tritium retention in tungsten walls using a fusion reactor simulation code

Yosio Ueda (Osaka University, Suita, Japan)

Co-author in P3.101 Tungsten and Iron sputtering properties over recrystallization temperature

Yoshio Ueda (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Yoshio Ueda (Osaka University, Suita city, Japan)

Co-author in P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation

Takeshi Uemori (Division of Industrial Innovation Sciences, Graduate School of Natural Science & Technology, Okayama University, Okayama, Japan)

Co-author in P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test

Yuki Uemura (Graduate School of Science and Technology, Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Katsunao Uenishi (Osaka University, Suita, Japan)

Co-author in P3.101 Tungsten and Iron sputtering properties over recrystallization temperature

Anna Chiara Uggenti (NEMO group, Dipartimento Energia, Politecnico di Torino, 10129 Torino, Italy)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Davide Uglietti (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Davide Uglietti (Swiss Plasma Center, EPFL, 5232 Villigen-PSI, Switzerland)

Co-author in O1C.4 Effect of cycling load on performance of strands made by twisted-stacks of HTS tapes

Fischer Ulrich (Neutronics and Nuclear Data Group, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.200 Improved Solid Decomposition Algorithms for the CAD-to-MC Conversion Tool McCad

Fischer Ulrich (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.130 Identification of Blanket design points using an integrated multi-physics approach

D. Ulyatt (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Naotaka Umeda (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Naotaka Umeda (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Bernhard Unterberg (Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung, 52425 Juelich, Germany)

Co-author in O5B.1 Post-irradiation high heat flux investigation of plasma facing components

E.A. Unterberg (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Zeke A. Unterberg (Oak Ridge National Laboratory, Oak Ridge, TN 37830, United States)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

Bernhard Unterberg (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

D. Upadhyay (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Arkadiusz Urban (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

Jakub Urban (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Egidijus Urbonavicius (Lithuanian Energy Institute, Breslaujos g. 3, LT-44403, Lithuania)

Co-author in O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant

Alejandro Urena (Materials Science and Engineering Area, Rey Juan Carlos University, C/ Tulipan S/N 28933 Mostoles (Madrid), Spain)

Co-author in P2.188 Potential improvements of W-Eurofer first wall brazed joint using alloyed powders filler

Fernando R. Urgorri (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Fernando Urgorri (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in O1A.1 Tritium modeling in HCPB breeder blanket at a system level: a preliminary parametrical approach

Fantz Ursel (Max Planck InstitutfürPlasmaphysik , Boltzmannstraße 2 D-85748 Garching, Germany)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Andrey Ushakov (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Marco Utili (FSN-ING, ENEA, Camugnano, Italy)

Co-author in P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM

Marco Utili (ENEA RC Brasimone, 40032 Camugnano, Bologna, Italy)

Co-author in P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis

Marco Utili (ENEA Brasimone R.C., 40032 Camugnano, Bologna, Italy)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Marco Utili (ENEA, Brasimone R.C., 40032 Camugnano, Bologna, Italy)

Co-author in P4.190 Experimental loop and purification system design for corrosion in flowing PbLi

Marco Utili (ENEA CR Brasimone, Località Brasimone 40032, Camugnano (BO), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

Marco Utili (UTIS, Enea Centro Ricerche Brasimone, Località Brasimone, Camugnano (BO), Italy)

Co-author in P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy

Marco Utili (ENEA FSN-ING-QMN, ENEA, C.R. Brasimone, 40032 Camugnano - BO, Italy)

Co-author in P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li

Hiroyasu Utoh (Japan Atomic Energy Agency, Rokkasho-mura, Japan)

Co-author in P1.042 Conceptual design study of pellet fuelling system for DEMO

Hiroyasu Utoh (Japan Atomic Energy Agency, Rokkasho, Japan)

Co-author in P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor

Hiroyasu Utoh (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Hiroyasu Utoh (Sector of fusion research and development, Japan Atomic Energy Agency, Kamikita-gun, Aomori, Japan)

Co-author in P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor

Jukka-Pekka Uusitalo (Comatec Ltd, Kalevantie 7 C, 33100 Tampere, Finland)

Co-author in P3.052 Remote handling connector development for the ITER divertor diagnostics

Udo v. Toussaint (Max-Planck-Institut für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets

Christian Vacas (Numerical Analysis Technologies (NATEC S.L), Gijon, Spain)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Christian Vacas (NATEC, C/ Marqués de San Esteban 52 entlo D, 33206 Gijón, Spain)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Christian Vacas (Numerical Analysis Technologies (NATEC S.L), Gijón, Spain)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Alessandro Vaccaro (Karlsruhe Institute of Technology, D-76021 Karlsruhe, Germany)

Co-author in P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System

Alessandro Vaccaro (Institute for Applied Materials, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Jiri Vacik (Nuclear Physics Institute AS CR, 25068 Řež, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Vijay Vadher (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

Co-author in P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps

Mindaugas Vaisnoras (Lithuanian Energy Institute, LEI, Breslaujos g. 3, LT-44403, Lithuania)

Co-author in P3.197 Reference accident sequences for a demonstration fusion power plant

Ladislav Vala (Research Centre Rez, Hlavní 130, 250 68, Husinec-Řež, Czech Republic)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

Sudhirsinh Vala (Neutron Source Up-gradation Division, Institute for Plasma Research, Gandhinagar, India)

Co-author in P3.002 Rotating tritium target for intense 14-MeV neutron source

Ladislav Vala (Research Centre Rez, Hlavní 130, CZ - 250 68 Husinec-Řež, Czech Republic)

Co-author in P2.160 Status of the engineering activities carried out on the European DCLL

Ladislav Vala (Centrum výzkumu Řež, Hlavní 130, 250 68 Husinec-Řež, Czech Republic)

Co-author in P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO

Ladislav Vala (Centrum výzkumu Řež, Husinec-Řež, Czech Republic)

Co-author in P1.147 Status of the platform for integration and maintenance tests of the European TBM systems

Daniel Valcarcel (UKAEA-CCFE, Culham Science Centre, OX14 3DB Abingdon, United Kingdom)

Co-author in P4.119 Virtual prototyping tools for the JET divertor

Daniel Valcarcel (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Alberto Vale (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal)

Co-author in P4.135 Assessment of unmanned aerial vehicles for reactor inspection

Alberto Vale (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Tecnico, Av. Rovisco Pais 1, Lisboa, Portugal)

Co-author in O3C.4 Assessment of navigation technologies for autonomous vehicles in nuclear fusion facilities

Robert Vale (Power and Active Operations, UK Atomic Energy Authority, Abingdon, United Kingdom)

Co-author in O3B.1 The JET Materials Detritiation Facility for reducing radioactive waste liabilities

Alberto Vale (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Av Rovisco Pais 1, 1049-001 Lisboa, Portugal)

Co-author in P3.139 FFMECA and recovery strategies for ex-vessel remote maintenance systems in DEMO

Marco Valisa (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas

Matteo Vallar (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy;University of Padova, Via VIII Febbraio, 35122 Padova, Italy)

Co-author in P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas

Roser Vallcorba (IRFU, CEA Saclay, 91191, Gif-sur-Yvette, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Jean Claude Vallet (CEA, Saint Paul lez Durance, France)

Co-author in P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils

Eugenio Vallone (Dipartimento di Energia, Ingegneria dell'Informazione e Modelli Matematici, University of Palermo, Palermo, Italy)

Joelle Vallory (ITER, Fusion for Energy (F4E), Barcelona, Spain)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Dimitris Valougeorgis (Mechanical Engineering, University of Thessaly, Volos, Greece)

Co-author in P4.160 Modeling and simulation of time-dependent gas pumping scenarios in ITER

Oskars Valtenbergs (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia;Faculty of Chemistry, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Jos van der List (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Oana van der Togt (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Dirk Van Eester (Laboratory for Plasma Physics, LPP-ERM/KMS. TEC Partner, Brussels, Belgium)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Dirk Van Eester (LPP-ERM/KMS, Brussels, Belgium)

Co-author in P3.033 ICRF system efficency

Paul van Eeten (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P2.063 A structural integrity monitoring tool for Wendelstein 7-X

Paul van Eeten (Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)

Co-author in P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model

Didier Van Houtte (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Michael Van Schoor (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Michael Van Schoor (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Marco Van Uffelen (Remote Handling Project Team, Fusion For Energy, Barcelona, Spain)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

A. Varadharajulu (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Mykyta Varavin (Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Prague, Czech Republic)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak
Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

Anton V. Varavin (Usikov Institute for Radiophysics and Electronics NAS of Ukraine, 12, Akad. Proskura str., 61085 Kharkov, Ukraine)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Paulo Varela (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Lisboa, Portugal)

Co-author in P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system

Paulo Varela (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas

Paulo Varela (IPFN - Instituto de Plasmas e Fusão Nuclear, IST - Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)

Co-author in P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas

Paulo Varela (Instituto de Plasmas e Fusão Nuclear, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

Co-author in P1.052 Performance assessment of critical waveguide bends for the ITER in-vessel plasma position reflectometry systems

Ivan Vargas (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Hector Vargas (Escuela de Ingenieria Electrica, Pontificia Universidad Catolica de Valparaiso, Valparaiso, Chile)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

S. Varma (ITER-India, Institute for Plasma Research, Gandhinagar, India)

Co-author in O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System

Venugopal Varma (Oak Ridge National Laboratory, Oak Ridge, TN, United States)

Co-author in P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment

Pankaj Varmora (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

S. Varoutis (Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Nikos Vasileiadis (Mechanical Engineering, University of Thessaly, Volos, Greece)

Co-author in P4.160 Modeling and simulation of time-dependent gas pumping scenarios in ITER

Soultana Vasileiadou (Automation, Technonogical Education Institute of Piraeus, Piraeus, Greece)

Co-author in P1.030 Physics-based modelling of the ECRH system for MHD control applications

Alexandr S. Vasilev (Usikov Institute for Radiophysics and Electronics NAS of Ukraine, 12, Akad. Proskura str., 61085 Kharkov, Ukraine)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak

Vyacheslav Vasiliev (JSC «NIIEFA», St.Petersburg, Russian Federation;Alphysica GmbH, Karlsruhe, Germany)

Co-author in P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets

Theodora Vasilopoulou (Institute of Nuclear and Radiological Sciences, Energy, Technology and Safety, National Centre for Scientific Research Demokritos, Athens, Greece)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

T. Vasilopoulou (Institute of Nuclear and Radiological Sciences, Athens, 15310, Greece)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Alexander Vasilyev (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

Yana Vasina (Plasma Physics Department, National Research Nuclear University MEPhI, Moscow, Kashirskoe highway, 31, Russian Federation)

Co-author in P4.117 Low temperature deuterium release from lithium films

J. Vasquez (General Atomics MFE, san diego, United States)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

George Vayakis (ITER Organization, Route de Vinon-sur-Verdon, 13076 St. Paul-lez-Durance, France)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics
Co-author in P1.051 Signal processing for the extreme environment Hall sensors

George Vayakis (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

George Vayakis (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics
Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

George Vayakis (ITER Organization, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

George Vayakis (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

George Vayakis (ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic

George Vayakis (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Jesus Vega (Laboratorio Nacional de Fusion, CIEMAT, Madrid, Spain)

Co-author in P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases

Jesus Vega (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P1.045 Real time control developments at JET in preparation for deuterium-tritium operation

Pierluigi Veltri (INFN-LNL, V.le dell'Università 2, I-35020, Legnaro (PD), Italy)

Co-author in P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI

Rodrigo Ventura (Institute for Systems and Robotics, Instituto Superior Tecnico, Av. Rovisco Pais 1, Lisboa, Portugal)

Co-author in O3C.4 Assessment of navigation technologies for autonomous vehicles in nuclear fusion facilities

Rodrigo Ventura (Instituto de Sistemas e Robotica, Instituto Superior Tecnico, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal)

Co-author in P4.135 Assessment of unmanned aerial vehicles for reactor inspection

Alessandro Venturini (Department of Civil and Industrial Engineering, Università di Pisa, Largo Lucio Lazzarino 2, 56122, Pisa, Italy)

Co-author in P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

Alessandro Venturini (Dipartimento di Ingegneria Civile e Industriale, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy, Italy)

Co-author in P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM

Luigi Verdini (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Geert Verdoolaege (Applied Physics Department, Ghent University, B-9000 Gent, Belgium;Laboratory for Plasma Physics, Royal Military Academy, B-1000 Brussels, Belgium)

Co-author in P3.050 Physical characterization of the JET operational space regarding EMLs by means of discriminant analysis

Marina Verdu (National Fusion Laboratory, CIEMAT, Madrid, Spain)

Co-author in P3.175 Radiation induced deuterium absorption dependence on temperature, dose rate, and gas pressure for SiC

Gabor Veres (WIGNER RCP, RMKI, Konkoly-Thege Miklós u. 29-33, Budapest, H-1121,, Hungary)

Co-author in P2.186 Diffusion welding methods at Plasma Facing Components in fusion reactor environment

Gabor Veres (Plasma Physics Department, Wigner RCP, RMI, PO Box 49, H-1521, Budapest, Hungary)

Co-author in P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium

Gabor Veres (Department of Plasma Physics, Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P3.072 Fuzzy logic based model of bolometer detector sensors and cameras

Antonio Vergara (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Jean-Marc Verger (CEA/DRF/IRFM, Saint Paul-lez-Durance, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Peter Verhoeff (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

Ad Verlaan (TNO, P.O. Box 155 NL-2600 AD, Delft, Netherlands)

Co-author in P4.079 ITER UWAVS first mirror plasma cleaning prototype development

A.L. Verlaan (Netherlands Organisation for Applied Scientific Research (TNO), Stieltjesweg 1, 2600 AD Delft, Netherlands)

Co-author in P4.057 The UWAVS R&D and design efforts for ITER

Vladimir Vershkov (NRC Kurchatov Institute , , Moscow, 123182, Akademika Kurchatova sq. 1, Russian Federation)

Co-author in P2.136 Multiphysics engineering analysis for high field side reflectometry

Michel Vervier (Laboratory for Plasma Physics LPP, ERM/KMS, Brussels, Belgium)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Ladislav Vesely (Energy engineering, Czech Technical University In Prague, Prague, Czech Republic)

Co-author in P2.197 Study of the Cooling Systems with S-CO2 for the DEMO Fusion Power Reactor

Ladislav Vesely (Faculty of Mechanical Engineering, Department of Energy Engineering, Czech Technical University In Prague, Prague 6, Czech Republic)

Co-author in P2.110 Design of the divertor targets shielding frame of the HELCZA experimental complex

Evgeny Veshchev (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Dionisio Vian (JEMA, Paseo del Circuito 10, 20160 Lasarte-Oria Gipuzkoa, Spain)

Co-author in P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies

Nicola Vianello (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.069 Advanced probe for transport measurements in medium-size tokamaks

Martin Vician (Centrum výzkumu Řež, Husinec-Řež, Czech Republic)

Co-author in P1.147 Status of the platform for integration and maintenance tests of the European TBM systems

Ladislav Viererbl (Research Centre Rez, Hlavní 130, 250 68 Husinec-Řež, Czech Republic)

Co-author in P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics

L. Viererbl (Research Centre Rez, Hlavní 130, CZ-25068 Husinec-Řež, Czech Republic)

Co-author in P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors

T. Vierle (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Ondrej Vik (Institute of Inorganic Chemistry AS CR, 250 68 Rez, Czech Republic)

Co-author in P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase

Rafael Vila (Fusion Materials Unit, CIEMAT, Madrid, Spain)

Co-author in I4.1 European-WP development on functional materials for diagnostics and H&CD systems in future fusion reactors

Rafael Vila (CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)

Co-author in P3.184 Diffusion-controlled F center thermal annealing in neutron, electron and heavy-ion irradiated insulators

R. Vila (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Reinhard Vilbrandt (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

Reinhard Vilbrandt (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Monika Vilemova (Materials Engineering, Institute of Plasma Physics of the CAS, Prague 8, Czech Republic)

Co-author in P3.181 On the phase transitions of Y2O3 in ultrafine grained W-Y2O3 composite

Monika Vilemova (Institute of Plasma Physics, Department of Materials Engineering, 18200 Prague, Czech Republic)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Edgardo Villalobos (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

Co-author in P3.014 Manufacturing of a small scale Stellarator in Costa Rica

Rosaria Villari (Department of Fusion and Nuclear Safety Technology, ENEA, Frascati, Italy)

Co-author in P1.128 Nuclear responses in the ITER IVVS port cell

Rosaria Villari (UTFUS-TECN, ENEA, Via E. Fermi 45, 00044 Frascati (Rome), Italy)

Co-author in P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model

Rosaria Villari (EUROfusion Consortium, JET, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom;Department of Fusion and Nuclear Safety Technology, ENEA, Frascati (Rome), Italy)

Co-author in P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET

Rosaria Villari (Department of Fusion and Nuclear Safety Technology, ENEA, I-00044 Frascati (Rome), Italy)

Co-author in P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options

R. Villari (ENEA, Dipartimento Fusione e tecnologie per la Sicurezza Nucleare, Via E. Fermi 45, 00044 Frascati, Italy)

Co-author in I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses

Rosaria Villari (Unità Tecnica Fusione, ENEA-Frascati, Frascati, Italy)

Co-author in P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette

Rosaria Villari (ENEA, Frascati, Italy)

Co-author in P3.127 Initial definition of load conditions in DEMO

Rosaria Villari (ENEA CR Frascati, Via E. Fermi 45, 00044, Frascati (RM), Italy)

Co-author in O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives

R. Villari (EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK, ENEA, Department of Fusion and Nuclear Safety Technology, I-00044 Frascati (Rome), Italy)

Co-author in I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER

Rosaria Villari (Department of Fusion and Nuclear Safety Technology, ENEA, 00044 Frascati (Rome), Italy)

Co-author in P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign

Eric Villedieu (IRFM, CEA, Saint Paul lez Durance, France)

Co-author in O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System

Eric Villedieu (IRFM, CEA, F-13108 Saint-Paul-Lez-Durance, France)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Frantz Villers (ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Fabio Villone (DIEI, CREATE, Università di Cassino e Lazio Meridionale, Viale dell'Università, 03043 Cassino (FR), Italy)

Co-author in P2.009 The DTT device: first wall, vacuum vessel and cryostat structure

Fabio Villone (Dept. of Automation, Electromagnetism, Information Engineering and Industrial Mathematics, Univ. Di Cassino e del Lazio Meridionale, Cassino (FR), Italy)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Pietro Vincenzi (Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy)

Co-author in P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas

Pietro Vincenzi (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4 - 35127 Padova, Italy)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Pietro Vincenzi (Consorzio RFX, Padova, Italy)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Pietro Vincenzi (Consorzio RFX, I-35127 Padova, Italy)

Co-author in P2.007 The DTT device: systems for heating

Igor Vinyar (PELIN, LLC., Saint-Petersburg, Russian Federation)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Igor Vinyar (PELIN LLC, Saint-Petersburg, Russian Federation)

Co-author in P4.006 Development of pellet injection system for KSTAR

Francois Virot (IRSN, Saint Paul Lez Durance, France)

Co-author in O4C.4 Beryllium dust behaviour during ITER LOCA accident

Eliseo Visca (ENEA, Unità Tecnica Fusione, ,ENEA C. R. Frascati, via E. Fermi 45, Italy)

Co-author in P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor

Eliseo Visca (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units

Eliseo Visca (FSN, ENEA, Frascati, Italy)

Co-author in P1.107 Residual stresses evaluation during Plasma Facing Units Hot Radial Pressing manufacturing process

Eliseo Visca (Fusion and Technology for Nuclear Safety and Security, ENEA, Via Enrico Fermi, 45 - 00044 Frascati, Italy)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Krasilnikov Vitaly (ITER Organization, St. Paul-lez-Durance, France)

Co-author in P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System

Zsolt Vizvary (CCFE, Abingdon, United Kingdom)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Pavel Vladimirov (Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe, Germany)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Jiri Vlcek (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Praha 8, Czech Republic)

Co-author in P1.051 Signal processing for the extreme environment Hall sensors

John Vomvoridis (National Technical University of Athens, Athens, Greece)

Co-author in P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER

Axel Von der Weth (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO

Axel von der Weth (INR-MET, KIT, Karlsruhe, Germany)

Co-author in P3.145 Review of Hydrogen Isotopes Transport Parameter

Alexander von Muller (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany;Technische Universität München, Boltzmannstraße 15, 85748 Garching, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Petr Vondracek (Institute of Plasma Physics of the CAS, Prague, Czech Republic;Faculty of Mathematics and Physics, Charles University, Prague, Czech Republic)

Co-author in P2.059 Fast infrared thermography on the COMPASS tokamak

Murtuza M. Vora (Institute for Plasma Research, Ahmedabad, India)

Co-author in P3.015 SST-1 up-gradation update & recent experiments in SST-1

Stefan Vorbrugg (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Stefan Vorbrugg (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

Christian Vorpahl (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Christian Vorpahl (Port Plugs & Diagnostics Integration Division, ITER Organisation, St Paul Lez Durance, France)

Co-author in P3.054 ITER Diagnostic Shutters

Ngoc Minh Trang Vu (IRFM, CEA Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.044 Plasma internal profile control using IDA-PBC: Application to TCV

Konstantin Vukolov (NRC Kurchatov Institute, Moscow, 123182, 1 Akademika Kurchatova sq., Russian Federation)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Konstantin Vukolov (Kurchatov Institute, Moscow, Russian Federation)

Co-author in P4.052 Fiber optics for plasma diagnostics in ITER

Dmitry Vukolov (NRC Kurchatov Institute & Fusion Center, Moscow, Russian Federation)

Karl Vulliez (Laboratoire d’étanchéité, CEA/DEN/DTEC/SDTC, 2 rue James Watt 26700 Pierrelatte, France)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Mahesh Vuppugalla (Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Leonid Vyacheslavov (Budker Institute of Nuclear Physics, 11 akademika Lavrentieva prospect, Novosibirsk, 630090, Russian Federation;Novosibirsk State University, 2 Pirogova street, Novosibirsk, 630090, Russian Federation)

Co-author in P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”

team W7-X (Max-Planck-Institut für Plasmaphysik, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.066 Concept of C/O monitor diagnostic for stellarator W7-X

Team W7-X (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

W7-X team (Max-Planck-Institüt für Plasmaphysik, Greifswald, Germany)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

W7-X team (Institut für Plasmaphysik, Max-Planck-Gesellschaft MPG, 17491 Greifswald, Germany)

Co-author in P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning

Patrick Waibel (Institute for Applied Computer Science , Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P4.171 Enhanced Jet Stability For The Melt-Based Production Of Lithium Orthosilicate/Metatitanate Pebbles

Eiichi Wakai (Japan Atomic Energy Agency, Ibaraki, Japan)

Co-author in P4.175 Cavitation upstream of liquid lithium target for intense fusion nuetoron source

Takuma Wakatsuki (Department of Fusion Power Systems, Japan Atomic Energy Agency, Aomori, Japan)

Co-author in P1.041 Progress of DEMO physics design study in Japan

Chris Waldon (Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Richard Walker (CCFE, Abingdon, United Kingdom)

Co-author in P3.157 Neutron activation of impurity seeding gases within a DEMO environment

Michael L. Walker (General Atomics, San Diego, CA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

R. J. Walker (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Mike L. Walker (General Atomics, San Diego, United States)

Co-author in P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System

Michael Walker (General Atomics, PO Box 85608, San Diego, CA 92186-5608, United States)

Co-author in P4.043 Towards a preliminary design of the ITER Plasma Control System architecture

Michael Walsh (ITER Organization, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.050 Laser-induced Fluorescence for ITER Divertor Plasma

Michael Walsh (ITER organisation, Route de Vinon-sur-Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.058 Hardware solutions for ITER divertor thomson scattering

Michael Walsh (ITER Organization, St Paul Lez Durance Cedex, France)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

Michael Walsh (TED, Diagnostic Division, ITER Organization, Caradache, France)

Co-author in P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics

Mike J. Walsh (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P4.124 Microwave response of ITER diagnostic vacuum windows

Michael Walsh (Port Plug & Diagnostics, ITER, Vinon-sur-Verdon, France)

Co-author in P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17

Michael Walsh (TED, Diagnostic Division, ITER Organization, Cadarache, France)

Co-author in P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Mike Walsh (ITER Organisation, St Paul Lez Durance Cedex, France)

Co-author in P1.058 ITER Erosion/Deposition Monitor Diagnostic

Michael Walsh (ITER Organization, Route de Vinon sur Verdon, 13067 Saint Paul lez Durance Cedex, France)

Co-author in P3.203 ITER Generic Diagnostics Ports nuclear analysis

Michael Walsh (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Robert Walton (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER

Robert Walton (Intransic Engineering Ltd, Osler Road, Oxford, United Kingdom)

Co-author in P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors

W.R. Wampler (Sandia National Laboratories, Albuquerque, NM, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Yuanxi Wan (for CFETR team, Institute of Plasma Physics, Chinese Academy of Science, Hefei, Anhui, 230031, China)

Co-author in I2.2 Progresses and Activities on the Chinese Fusion Engineering Test Reactor

B.N. Wan (Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Jin Wang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China, Hefei, Anhui, China)

Co-author in P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System

H.J. Wang (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China;Institute of Plasma Physics Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Jiaqun Wang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China, Hefei, Anhui, China)

Co-author in P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System

Fang Wang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China, Hefei, Anhui, China)

Co-author in P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System

Jiaqun Wang (Institute of Nuclear Energy Safety Technology, CAS·FDS Team, No.350, Shushanhu Road, Hefei, Anhui, China)

Co-author in P3.193 Probabilistic safety classification approach for SSCs of fusion reactors

Fang Wang (Institute of Nuclear Energy Safety Technology, CAS·FDS Team, No.350, Shushanhu Road, Hefei, Anhui, China)

Co-author in P3.193 Probabilistic safety classification approach for SSCs of fusion reactors

Jin Wang (Institute of Nuclear Energy Safety Technology, CAS·FDS Team, No.350, Shushanhu Road, Hefei, Anhui, China)

Co-author in P3.193 Probabilistic safety classification approach for SSCs of fusion reactors

Sonjong Wang (Heating and Current Drive Research Team, National Fusion Research Institute(NFRI), Deajeon, South Korea)

Co-author in P4.005 Issues of arc discharge for long pulse KSTAR NBI

W. Wang (Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), Hefei, Anhui, China)

Co-author in P4.101 High heat flux testing of newly developed tungsten components for WEST

Zhongwei Wang (Max-Planck-Institut für Plasmaphysik, Garching bei Muenchen, Germany)

Co-author in P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event

Sonjong Wang (KSTAR Research center, NATIONAL FUSION RESEARCH INSTITUTE, 169-148 GWAHAK-RO, YUSEONG-GU, DAEJEON 34133, South Korea)

Co-author in P2.031 Design of high power traveling wave antenna for KSTAR helicon wave current drive

Haibing Wang (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Sonjong Wang (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Yongbo Wang (Laboratory of Intelligent Machines, Lappeenranta University of Technology, lappeenranta, Finland)

Co-author in P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators

Zhongwei Wang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.015 Integration design platform of CFETR

Lijun Wang (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Wenhao Wang (Department of Engineering Physics, Tsinghua University, Beijing, China)

Co-author in P4.097 Development of a quasi-steady state high voltage power supply based on Marx generator

Zhijiang Wang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science & Technology, Wuhan, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Lijun Wang (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Shouzhi Wang (Department of Engineering Physics, Tsinghua University, Beijing, China)

Co-author in P4.097 Development of a quasi-steady state high voltage power supply based on Marx generator

Sonjong Wang (National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P4.001 Vacuum pumping system of neutal beam injector in KSTAR

Qiaosen Wang (State Key Laboratory of Electrical Insulation and Power Equipment, Xi‘an Jiaotong University, Xi'an, China)

Co-author in P2.095 Numerical investigation on the steady temperature rise of a by-pass switch

Yingqiao Wang (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Sonjong Wang (Heating and current drive team, National Fusion Research Institute(NFRI), DAEJEON, South Korea)

Co-author in P2.032 Development of 4-MW KSTAR LHCD system

Qiaosen Wang (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China)

Co-author in P2.096 Numerical investigation on the current commutation process of a quench protection switch

Y. Wang (ASIPP, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Pinghuai Wang (Southwestern Institute of Physics, Chengdu, China)

Co-author in P2.187 Study on the optimization of Cu/SS explosion bonding for ITER first wall components

Yongbo Wang (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

J. Wang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST

Shuang Wang (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.159 Theoretical and Experimental Study on Effective Thermal Conductivity of Pebble Beds for Fusion Blanket

Shuang Wang (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P1.158 Experimental study on effective thermal conductivity of pebble beds for fusion blankets

Shuai Wang (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, China)

Co-author in P1.163 Safety analysis of the helium cooling system for the HCSB blanket of CFETR

Shenji Wang (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei 230026, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Zhongwei Wang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Yongbo Wang (Mechanical Engineering, School of Energy Systems, Lappeenranta Uinversity of Technology, Lappeenranta, Finland)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Yongsheng Wang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

H.J. Wang (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Hexiang Wang (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, United States)

Co-author in P3.039 Model-based optimal scenario planning in EAST

Dagui Wang (Institute of Nuclear Energy Safety, HeFei, China)

Co-author in P2.193 A comparative study on two DEMO-relevant test blanket modules

Yongfeng Wang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Bo Wang (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Manfred Wanner (Broader Fusion Development, F4E, Garching, Germany)

Co-author in P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant

F. Warmer (Max Planck Institute for Plasma Physics, Wendelsteinstraße 1, 17489 Greifswald, Germany)

Co-author in I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator

Felix Warmer (Max-Planck-Institute for Plasma Physics (IPP), Greifswald, Germany)

Co-author in P4.203 Neutronics analysis of a stellarator power reactor based on the HELIAS concept

R. Warren (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

Robert Warren (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Kazuhiro Watanabe (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Kazuhiro Watanabe (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Jon G. Watkins (Sandia National Laboratories, Albuquerque, New Mexico 87185, United States)

Co-author in P3.109 Thermal management of tungsten leading edges in DIII-D and ITER

J.G. Watkins (Sandia National Laboratories, Albuquerque, NM, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Christopher Watts (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Tom Wauters (Plasma Physics Laboratory, ERM/KMS, 30, Avenue de la Renaissance - 1000 Brussels, Belgium)

Co-author in P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS

Thomas Weber (Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

Co-author in P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall

Tobias Wegener (Forschungszentrum Jülich, Jülich, Germany)

Co-author in O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics

Tobias Wegener (Institute of Energy and Climate Research – Plasmaphysics, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany)

Co-author in P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing

Tobias Wegener (Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Juelich GmbH, Juelich, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Tobias Wegener (Institut für Energie- und Klimaforschung – Plasmaphysik, IEK-4, Partner of the Trilateral Euregio Cluster (TEC), Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions

William Wehner (Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, PA, United States)

Co-author in O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D

Jing Wei (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, China)

Co-author in P1.187 Qualification of structural stainless steel products for the ITER correction coil cases

Jing Wei (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Shiping Wei (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.199 Environmental safety assessment for fusion reactor due to gaseous tritium release

Yuguo Wei (Harbin Electric Machinery Company Limited, Harbin, Heilongjiang, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Wang Weihua (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China;Institute of Applied Physics, AOA, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Wang Weihua (Institute of Applied physics, Army Officer Academy of PLA, Hefei city, Anhui Province, P.R.China 230031, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

Xuan WeiMin (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.094 Study on 300MVA pulse generator starting system

Bastian Weinhorst (Institute for Neutron Physics and Reactor Technology , Karlsruhe Institute of Technology , Eggenstein-Leopoldshafen, Germany)

Co-author in P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria

Bastian Weinhorst (Institute for Neutron Physics and Reactor Technology, KIT, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.026 Update of the cooling design if the ITER EC upper launcher

Vladimir Weinzettl (Institute of Plasma Physics of the CAS, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak

Vladimir Weinzettl (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Vladimir Weinzettl (Institute of Plasma Physics of The Czech Academy of Sciences, Za Slovankou 3, 182 00 Prague 8, Czech Republic)

Co-author in P3.126 Dust remobilization experiments on the COMPASS tokamak

Klaus-Peter Weiss (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

Michael Weissgerber (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Sven Weißflog (Max-Planck-Institute for Plasma Physics, 17491 Greifswald, Germany)

Co-author in P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator

Arthur Weller (Max-Planck Institute of Plasma Physics, Wendelsteinstrasse 1, 17491 Greifswald, Germany)

Co-author in P2.069 Conceptual design of multi-foils system for stellarator W7-X

Jorg Wendorf (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Ronald Wenninger (Power Plant Physics & Technology Department, PMI, EUROfusion Consortium, Garching, Boltzmannstr. 2, Germany;Max-Planck-Institut fur Plasmaphysi, Garching, Boltzmannstr. 2, Germany)

Co-author in P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO

Ronald Wenninger (Programme Management Unit, Eurofusion, Garching, Germany;IPP, Garching, Germany)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Ronald Wenninger (EUROfusion Consortium, Boltzmannstr. 2, 85748 Garching, Germany;Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down

Ronald Wenninger (EUROfusion Power Plant Physics and Technology (PPPT) department, EUROfusion, Garching, Germany)

Co-author in P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor

Roland Wenninger (EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching, Germany;Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching, Germany)

Co-author in P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO

Ronald Wenninger (EUROfusion PMU, Boltzmannstr. 2, Garching 85748, Germany;IPP, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Ronald Wenninger (Power Plant Physics and Technology, EUROfusion PMU, Garching, Germany)

Co-author in P3.127 Initial definition of load conditions in DEMO

Uwe Wenzel (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Kraus Werner (Max Planck InstitutfürPlasmaphysik , Boltzmannstraße 2 D-85748 Garching, Germany)

Co-author in P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility

Andreas Werner (Max-Planck-Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.038 Application of the engineering standard for functional safety to the W7-X central safety system

Andreas Werner (Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Wendelsteinstraße 1, D-17491 Greifswald, Germany)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Andreas Werner (Wendelstein 7-X Operations (OP), Max Planck Institut fuer Plasmaphysik, Teilinstitut Greifswald, Greifswald, Germany)

Co-author in P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation

Andreas Werner (W7-X Operation, Max Planck Institute for Plasma Physics, Greifswald, Germany)

Co-author in P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system

Andreas Werner (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

Andreas Werner (Max-Planck-Institut für Plasmaphysik, Greifswald, Germany)

Co-author in P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X

Rainer Wesche (SPC, EPFL, Villigen PSI, Switzerland)

Co-author in P1.089 Central solenoid winding pack design

Rainer Wesche (Swiss Plasma Center, EPFL, 5232 Villigen-PSI, Switzerland)

Co-author in O1C.4 Effect of cycling load on performance of strands made by twisted-stacks of HTS tapes

team WEST (Institut de Recherches sur la Fusion par confinement Magnétique, CEA, Saint Paul lez Durance, France)

Co-author in P1.070 Measurements and controls implementation for the WEST project

Team WEST (CEA/IRFM, 13108 - Saint Paul Lez Durance CEDEX, France)

Co-author in P1.069 The WEST Plasma Facing Components Protection

D. Whittaker (Culham Science Centre (CCFE), Abingdon, United Kingdom)

Co-author in O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems

Hyunho Wi (KSTAR Research center, NATIONAL FUSION RESEARCH INSTITUTE, 169-148 GWAHAK-RO, YUSEONG-GU, DAEJEON 34133, South Korea)

Co-author in P2.031 Design of high power traveling wave antenna for KSTAR helicon wave current drive

Kamil Wichterle (Department of chemistry, Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava, Czech Republic)

Co-author in P1.170 Helium bubble release from Pb-16Li within the Breeding Blanket

Anna Widdowson (Culham Science Centre, Culham Centre for Fusion Energy, Abingdon, United Kingdom)

Co-author in P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors

Anna Widdowson (CCFE, Abingdon, United Kingdom)

Co-author in P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET

Anna M Widdowson (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall

David Wilson (CCFE, Culham Science Centre, Abingdon, OX11 3DB, United Kingdom)

Co-author in P4.169 Tritium introduction module design for the JET tokamak

David Wilson (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P4.170 Operational aspects of the JET Tritium Introduction Modules

Axel Winter (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Marius Wirtz (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, Jülich, Germany)

Co-author in O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading

Marco Wischmeier (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Anna Wojcik-Gargula (Department of Radiation Transport Physics, Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN), Krakow, Poland)

Co-author in P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research

A. Wojcik-Gargula (Institute of Nuclear Physics, Polish Academy of Sciences, PL-31-342 Krakow, Poland)

Co-author in P1.196 Status and planning of ITER material activation experiments at JET

Andrzej Wojenski (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Andrzej Wojenski (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Andrzej Wojenski (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Andrzej Wojenski (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Michael J. Wolf (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP), Karlsruhe, Germany)

Co-author in P1.096 HTS CroCo for future fusion magnets

R. C. Wolf (Max Planck Institute for Plasma Physics, Wendelsteinstraße 1, 17489 Greifswald, Germany)

Co-author in I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator

Gilles Wolfers (Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain)

Co-author in P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors

Dan Wolff (RACE, UKAEA, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom)

Co-author in P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO

Andreas Wolk (Wendelstein 7-X Operation CoDaC, IPP Greifswald, Wendelsteinstr. 1, D-17491 Greifswald, Germany)

Co-author in O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System

C.P.C. Wong (General Atomics, San Diego, CA, United States)

Co-author in O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond

Myeong Hyeon Woo (Nuclear Engineering, Hanyang University, SEOUL, South Korea)

Co-author in P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO

Steve Wood (RACE, UKAEA, Culham Science Centre, Oxfordshire, United Kingdom)

Co-author in O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies

Jerome Woodward (RACE, UKAEA, Culham, United Kingdom)

Co-author in O3C.1 ITER Neutral Beam Remote Cutting & Welding Development

Emma Wooldridge (CCFE, Culham Science Centre, Abingdon, OX13 3DB, United Kingdom)

Co-author in P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms

Emma Wooldridge (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna

Lee Woongryol (Control team, National Fusion Research Institute, DAEJEON, South Korea)

Co-author in P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory

Liam Worth (ITER Organization, St Paul Lez Durance, France)

Co-author in P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization

Urszula Woznicka (Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland)

Co-author in P2.053 High resolution neutron spectrometer system for ITER

Huapeng Wu (Mechanical Engineering, School of Energy Systems, Lappeenranta Uinversity of Technology, Lappeenranta, Finland)

Co-author in P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering

Huapeng Wu (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

Jing Wu (Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P4.127 Accuracy improvement studies for remote maintenance manipulators

Yican Wu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)

Bin Wu (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Yican Wu (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Y.F. Wu (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China;Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Xinlian Wu (KEYE workshop, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Chuanren Wu (Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany)

Co-author in O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion

Yuan Wu (University of California, Santa Barbara, Santa Barbara, CA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Jing Wu (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd, China;Lappeenranta university of technology, Skinnarilankatu 34, Lappeenranta, Finland)

Co-author in P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application

Jiefeng Wu (Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Road, Hefei, Anhui 230031, China)

Co-author in P4.141 Research of NG-TIG welding technology on full-scale sector prototype of CFETR vacuum vessel

Huapeng Wu (Lappeenranta university of technology, Skinnarilankatu 34, Lappeenranta, Finland)

Co-author in P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application

Huapeng Wu (Laboratory of Intelligent Machines, Lappeenranta University of Technology, lappeenranta, Finland)

Co-author in P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators

Jiefeng Wu (instititue of plasma physics chinese academy of sciences, HEFEI. ANHUI, China)

Co-author in P4.142 A Study on Assembly Technology of the CFETR 1/32 Vacuum Vessel

Yican Wu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P1.194 Status and strategy of the study on the neutron irradiation damage of CLAM steel
Co-author in P1.198 Gaps analysis for the DEMO safety research and development

Huapeng Wu (Lappeenranta University of Technology, Skinnarilankatu 34 53850 Lappeenranta, Finland)

Co-author in P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm

Jing Wu (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, China;Lappeenranta University of Technology, Skinnarilankatu 34 53850 Lappeenranta, Finland)

Co-author in P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm

Y.F. Wu (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Huapeng Wu (Lab of Intelligent Machines, Lappeenranta University of Technology, Lappeenranta, Finland)

Co-author in P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling

Dirk Wuenderlich (ITER Technology & Diagnostics, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.024 Progress and further plans towards high power negative ion beams at ELISE

Sven-Erik Wulf (Institute for Applied Materials, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.182 Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers

Dirk Wunderlich (ITER Technology and Diagnostics, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching bei München, Germany)

Co-author in P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams

Glen Wurden (Los Alamos National Laboratory, Los Alamos, NM 87545, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Stefan Wurster (Department of Materials Physics, Montanuniversität Leoben, 8700 Leoben, Austria)

Co-author in P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process

Weibin Xi (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Donghui Xia (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science & Technology, Wuhan, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Zhiwei Xia (Center for Fusion Science, Southwestern Institute of Physics, Chengdu, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Zhiwei Xia (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.008 Preliminary design of local magnetic shield for solenoid valve in FPSS of ITER gis

Yang Xianfu (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

Zhang Xianming (NBI Group, Auxiliary Heating Division (104 Division), Center for Fusion Science of Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M

Gong Xianzu (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Zunqi Xiao (Institute of Nuclear Energy Safety Technology (INEST), Hefei, Anhui, China)

Co-author in P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field

Jixiong Xiao (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science & Technology, Wuhan, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Bingjia Xiao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China;School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, China)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

Chijin Xiao (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Chijin Xiao (University of Saskatchewan, 116 Science Place, Saskatoon, SK S7N 5E2, Canada)

Co-author in P2.001 3D effects of tokamak ferromagnetic core on magnetic field

Maria Gabriella Xibilia (Dipartimento di Ingegneria , Università degli Studi di Messina, Contrada di Dio, Italy)

Co-author in O3A.3 Model identiﬁcation of the temperature on the FTU liquid lithium limiter

Zhijiang Xie (State Key Laboratory of Mechanical Transmission, Chongqing University, chongqing, China)

Co-author in P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators

Yuanlai Xie (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems

Jingping Xin (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P1.194 Status and strategy of the study on the neutron irradiation damage of CLAM steel

Tiejun Xu (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Kun Xu (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei 230026, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

Hao Xu (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

M. Xu (Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Alan Xu (Department of Materials, Oxford University, Oxford, United Kingdom)

Co-author in O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys

Weimin Xuan (Tokamak Power Supply Division, Center for Fusion Science, Southwestern Institute of Physics, Chengdu, Sichuan, China)

Co-author in P4.095 Development of 300 MVA Motor Generator in HL-2M

Yong Xue (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Kiyohiro Yabuuchi (Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan)

Co-author in P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating

Brijesh Kumar Yadav (Institute for Plasma Research, Gandhinagar, India)

Co-author in P2.170 Helium Cooling Systems for Indian LLCB TBM

Ratnakar Yadav (ITER-India, Institute for Plasma Research, Gandhinagar, Gujarat, India)

Co-author in P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN

Juro Yagi (National Institute for Fusion Science, Toki, Japan)

Co-author in P2.172 Water hydraulic experiment as a simulant for the molten salt blanket with metal powders

Juro Yagi (Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Japan)

Co-author in P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt

Jyunichi Yagyu (Japan Atomic Energy Agency, Naka, Ibaraki, Japan)

Co-author in P1.073 Progress of the magnetic sensors development for JT-60SA

Koki Yakusiji (Osaka university, Osaka, Japan)

Co-author in P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation

Masayuki Yamada (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Ichihro Yamada (National Institute for Fusion Science (NIFS), Toki, Japan)

Co-author in P2.075 Zeff profile measurement system by using Thomson Polychromator

Tetsuya Yamada (Nagoya University, Nagoya City, Japan)

Co-author in P2.184 Development of Oxide dispersion strengthened-Copper using MA-HIP process

Haruhiko Yamakana (Naka Fusion Institution, Japan Atomic Energy Agency, Mukouyama 801-1, Naka-shi, Ibaraki, Japan)

Co-author in P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI

Takuya Yamamoto (University of California, Santa Barbara, Santa Barbara, CA, United States)

Co-author in O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000

Ryoutarou Yamamoto (Advanced of Energy Engineering science, kyushu universty, 6-1 kasugakouen kasuga-shi Fukuoka, Japan)

Co-author in P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition

Ryotaro Yamamoto (Advanced Energy Engineering Science, Kyushu University, Fukuoka, Japan)

Co-author in P1.206 Disposal Procedure for contaminated surface of tritium handling facility in the decommissioning operation

Yasushi Yamamoto (Faculty of Engineering Science, Kansai University, Suita, Osaka, Japan)

Co-author in P1.207 Environmental impact of nuclear fusion biomass gasification plant

Toshihiko Yamanishi (Japan Atomic Energy Agency, Rokkasho-mura, Aomori, Japan)

Co-author in P4.143 R&D activities of tritium technology on the broader approach in phase 2

Kohei Yamanoi (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Nobuo Yamaoka (Department of Sustainable Energy and Environmental Engineering, School of Engineering, Osaka University, Osaka, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

Nobuo Yamaoka (Osaka University, Osaka, Japan)

Co-author in P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method

Nobuo Yamaoka (Osaka University, 2-1 Yamadaoka, Suita-City, Osaka, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Masanori Yamazaki (Institute for Materials Research, Tohoku University, Oarai, Ibaraki, Japan)

Co-author in P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation

Zhao Yan Ping (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.036 Fabrication of the ICRF antenna of ASDEX-U device

Nagato Yanagi (Department of Helical Plasma Research, National Institute for Fusion Science, Toki-shi, Japan)

Co-author in P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options

Qingxi Yang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Yu Yang (ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance, France)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Qi Yang (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Qingxi Yang (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China;Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Wanli Yang (USTC, hefei, China)

Co-author in P1.160 The thermal analysis to pebble bed of CFETR

Xinsheng Yang (Southwest Jiaotong University, Chengdu, China)

Co-author in P4.075 Influence of twisting strain on the Bi-2212 tapes and round wires under background field

Q. Yang (ASIPP, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Sungmoo Yang (Department of Engineering, Seoul National University, Seoul, South Korea)

Co-author in P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST

Jeonghun Yang (Department of Nuclear Engineering, Seoul National University, Seoul, South Korea)

Co-author in P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST

Qi Yang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER

Ying Yang (Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831, United States)

Co-author in P1.106 Design of high-strength, high-conductivity, creep-resistant Cu alloys for fusion high heat flux structures

Yu Yang (ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds

Yu Yang (ITER Organization, Route de Vinon sur verdon, 13115 Saint Paul Lez Durance, France)

Co-author in P1.008 Preliminary design of local magnetic shield for solenoid valve in FPSS of ITER gis

Yong Yang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, China, 1037 Luoyu Road, Wuhan, Hubei Province, 430074, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

Wischet Yannic (Research Instruments GmbH, Friedrich-Ebert Str. 1, 51429 Bergisch Gladbach, Germany)

Co-author in P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source

Xinjia Yao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P4.159 Pellet injectors for EAST and KSTAR tokamaks

Damao Yao (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P3.195 RAMI analysis for EAST in-vessel components cooling system

Damao Yao (Institute of plasma physics, Hefei, China)

Co-author in O3C.2 Overview of remote handling technologies development in China

Oya Yasuhisa (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Eiichi Yatsuka (Naka Fusion Institute, Japan Atomic Energy Agency, 801-1 Mukoyama Naka, Ibaraki 311-0193, Japan)

Co-author in P3.054 ITER Diagnostic Shutters

V. Yavorskij (University of Innsbruck, Innsbruck, Austria)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

I. Yavorskij (University of Innsbruck, Fusion@Österreichische Akademie der Wissenschaften, Innsbruck, Austria)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

V. Yavorskij (University of Innsbruck, Kegelgasse 27/13, Wien, Austria)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

M.Y. Ye (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Minyou Ye (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei 230026, Anhui, China;Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui, China)

Co-author in P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code

M.Y. Ye (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Minyou Ye (Schoole of Nuclear Science and Technology, University of Science and Technology of China, Jinzhai Road 96, 230026, Hefei Anhui, China;Insititute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, 230031, Hefei Anhui, China)

Co-author in P1.123 Cooling concepts for CFETR divertor target

Minyou Ye (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei, Anhui, 230026, China;Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

Minyou Ye (School of Nuclear Sciences and Technology, University ofScience and Technology of China, Hefei, China)

Co-author in P1.015 Integration design platform of CFETR

Shi Yi (Institute of Plasma Physics, Ca, Hefei, China)

Co-author in P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor

Dapeng Yin (KEYE workshop, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Takehiko Yokomine (Department of Nuclear Engineering, Kyoto University, Kyoto, Japan)

Co-author in P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field

Vladimir Yolkin (JSC NIKIET, 107140, Malaya Krasnoselskaya 2/8, Moscow, Russian Federation)

Co-author in P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap

Izuru Yonekawa (Nippon Advanced Technology Co. Ltd., Tokai, Japan)

Co-author in P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system

Wang Yong Sheng (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.036 Fabrication of the ICRF antenna of ASDEX-U device

Jae-Sung Yoon (Nuclear Fusion Engineering Development Division, Korea Atomic Energy Research Institute, Daejeon, South Korea)

Co-author in P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea

Siwoo Yoon (KSTAR Research Center, National Fusion Research Institute, Daejeon, South Korea)

Co-author in O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond

Jae Sung Yoon (KAERI, 111, Daedeok-daro 989, Yuseong-gu, Daejeon, South Korea)

Co-author in P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM

Jae Sung Yoon (KAERI, Daejeon, South Korea)

Co-author in P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS

Kiyoshi Yoshida (QST, Naka, Naka, Ibaraki 311-0193, Japan)

Co-author in P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak

Masafumi Yoshida (Fusion Research and Development Directorate, Japan Atomic Energy Agency, Naka, Japan)

Co-author in O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator

Sachiko Yoshihashi (Fukui University of Technology, 3-6-1 Gakuen, Fukui-City, Fukui, Japan)

Co-author in P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet

Sachiko Yoshihashi (Department of Applied Nuclear Technology, Fukui University of Technology, Fukui, Japan)

Co-author in P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method

Sachiko Yoshihashi (Department of Applied Nuclear Technology, Faculty of Engineering Fukui University of Technology, Fukui, Japan)

Co-author in P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF

Matsumura Yoshihito (Tokai university, 4-1-1 Kitakaname, Hiratsuka-shi, Kanagawa 259-1292, Japan)

Co-author in P4.189 Monitoring of oxide layer structures in Pb and Pb-Li alloy by electrochemical impedance spectroscopy

Satoru Yoshikawa (Osaka University, Osaka, Japan)

Co-author in P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior

Satoru Yoshikawa (Osaka University, Suita city, Japan)

Co-author in P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation

Jeong-Ha You (Max-Planck-Institut für Plasmaphysik, Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO

Jeong-Ha You (Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in O2B.1 Plasma facing components for the European DEMO: advances in engineering designs

Jeong-Ha You (Max Planck Institute for Plasma Physics, Boltzmann Str. 2, 85748 Garching, Germany)

Jeong-Ha You (Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components

Jeong-Ha You (Max-Planck-Institut für Plasmaphysik, Garching, Germany)

Co-author in P2.114 Design options to avoid deep cracking of tungsten armor at 20 MW/m2

Jeong Ha You (GermanyNational Institute for Fusion, Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching, Germany)

Co-author in P1.117 Advances of the Design Study of ITER-like divertor target for DEMO

Jeong-Ha You (Max Planck Institute of Plasma Physics (E2M), Boltzmann Str.2, 85748 Garching, Germany)

Jeong-Ha You (Max Plank Institute of Plasma Physics , Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx

Y. Yu (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Y. Yu (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Shengpeng Yu (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Jie Yu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, CAS, Hefei, Anhui Province, China)

Co-author in O1A.3 Design and R&D Activities of Fusion Breeder Blankets in China

Xiao Yu (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Shengpeng Yu (Institute of Nuclear Energy Safety Technology, Hefei, China)

Co-author in P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model

Sikui Yu (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Yang Yu (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Qiping Yuan (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST

B.D. Yuan (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak

Yinglong Yuan (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

B.D. Yuan (School of Nuclear Science and Technology, University of Science and Technology of China, ,Hefei, China, China;Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Wu Yucheng (School of Materials Science and Engineering, Hefei University of Technology, Hefei city, Anhui Province, P.R.China 230009, China)

Co-author in P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid

Qiu Yuefeng (Neutronics and Nuclear Data Group, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

Co-author in P3.200 Improved Solid Decomposition Algorithms for the CAD-to-MC Conversion Tool McCad

Hatano Yuji (Hydrogen Isotope Research Center, University of Toyama, 3190 Gohuku, Toyama, 930-8555, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Uemura Yuki (Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529, Japan)

Co-author in P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W

Sei-Hun Yun (National Fusion Research Institute (NFRI), 169-148 Gwahakro, Yuseong, Daejeon, South Korea)

Co-author in P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios

Sei-Hun Yun (Tritium Technology team, NFRI(National Fusion Research Institute), 169-148 Gwahak-ro, Yuseong-gu, Deajeon, 305-806, South Korea)

Co-author in P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed

Song Yun Tao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.036 Fabrication of the ICRF antenna of ASDEX-U device

Kenta Yuyama (Graduate School of Science, , Shizuoka University, Shizuoka, Japan)

Co-author in P3.173 Radiation exposure effect on deuterium retention in SiC

Luca Zabeo (ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-lez-Durance Cedex, France)

Co-author in P4.046 Interface challenges as part of the ITER plasma control system design

Luca Zabeo (ITER Organization, St. Paul-Lez-Durance, Cadarache, France)

Co-author in P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER

Luca Zabeo (ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex, France)

Co-author in P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics

Wojciech Zabolotny (Warsaw University of Technology, 15/19 Nowowiejska Street, 00-665 Warsaw, Poland)

Co-author in P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests

Wojciech Zabolotny (Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, Poland)

Co-author in P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics

Wojciech Zabolotny (Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland)

Co-author in P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging

Wojciech Zabołotny (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Pierluigi Zaccaria (Consorzio RFX, Padua, Italy)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Pierluigi Zaccaria (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment
Co-author in P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test

Pierluigi Zaccaria (Consorzio RFX, 4, Corso Stati Uniti - 35127, Padova, Italy)

Co-author in P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory

Frantisek Zacek (Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Prague, Czech Republic)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak
Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

Frantisek Zacek (Association IPP.CR, 182 21 Praha 8, Czech Republic)

Co-author in O5B.2 Radio-frequency design of a lower hybrid slotted waveguide antenna

Pavel Zacha (Faculty of Mechanical Engineering, Department of Energy Engineering, Czech Technical University In Prague, Prague 6, Czech Republic)

Co-author in P2.110 Design of the divertor targets shielding frame of the HELCZA experimental complex

Pavel Zacha (Faculty of Mechanical Engineering, CTU in Prague, Prague, Czech Republic)

Co-author in P3.011 Water Evaporation - Condensation Cooling System Design for Pb-Li17 Cold Trap

Pavel Zacha (Energy Engineering, CTU in Prague, FME, Prague-6, Czech Republic)

Co-author in P2.109 Heat transfer enhancement of the DEMO first wall water cooling

Pavel Zacha (Czech Technical University in Prague, Zikova 1903/4, 166 36, Prague 6, Czech Republic)

Co-author in P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach

Jamie Zacks (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom)

Co-author in P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate

Roman Zagorski (Department of Nuclear Fusion and Plasma Spectroscopy, Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P1.114 Integrated core-SOL-divertor modelling for DEMO with tin divertor

Jaromir Zajac (Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Prague, Czech Republic)

Co-author in P2.056 2-mm microwave interferometer for COMPASS tokamak
Co-author in P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection

Tomas Zalezak (Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic)

Co-author in P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions

Andrea Zamengo (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Andrea Zamengo (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment

Irene Zammuto (Max Planck Institut für Plasmaphysik, Garching bei München, Germany)

Co-author in P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up

Irene Zammuto (Experimentelle Plasmaphysik 1, MPI für Plasmaphysik, Boltzmannstr.2, 85748 Garching, Germany)

Co-author in P4.123 Investigations on tungsten heavy alloys for use as plasma facing material

I. Zammuto (Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85738 Garching, Germany)

Co-author in I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained

Irene Zammuto (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Imanol Zamora (Fusion Energy Engineering Laboratory, Universidad Politecnica de Calatunya, Av. Diagonal 647, Pav. C, 08028 Barcelona, Spain, Spain)

Co-author in P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket

Imanol Zamora (IDOM Nuclear Services, Gran Vía Carlos III, 97 bajos, 08028 Barcelona (Spain), Spain)

Co-author in P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance

Enrico Zampiva (Consorzio RFX, Padova, Italy)

Co-author in P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System

Paolo Zanca (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade

Louis Zani (IRFM, CEA Cadarache, 13108, Saint-Paul-Lez-Durance, France)

Co-author in P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil

Louis Zani (Institute of Plasma Magnetic Confinement , CEA-Cadarache, CEA-Cadarache, 13108 St-Paul-Lez-Durance, France)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Louis Zani (IRFM, CEA, Saint-Paul-lez-Durance, France)

Co-author in P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility

Louis Zani (IRFM/STEP, CEA, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance, France)

Co-author in P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results

Louis Zani (IRFM, CEA, F-13108 St-Paul-lez-Durance, France , France)

Co-author in P1.083 Experimental stand for thermal-hydraulic tests of forced flow conductors using water at room temperature

Louis Zani (CEA, Cadarache, France)

Co-author in P3.127 Initial definition of load conditions in DEMO

Roberto Zanino (Energy Department, Politecnico di Torino, Torino, Italy)

Co-author in P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO
Co-author in P3.080 Performance analysis of ITER CSI coil and conductor 1A of the ITER CSMC

Roberto Zanino (NEMO Group, Dipartimento Energia, Politecnico di Torino, Torino, Italy)

Co-author in P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL

Roberto Zanino (Politecnico di Torino, Torino, Italy)

Co-author in P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels

Roberto Zanino (Dipartimento Energia, Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Torino , Italy)

Co-author in O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance

Loris Zanotto (Consorzio RFX, Padova, Italy)

Co-author in O1B.3 Design of machine upgrades for the RFX-mod experiment
Co-author in P2.011 The DTT device: power supply and electrical distribution system
Co-author in P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector

Rok Zaplotnik (Jožef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia)

Co-author in P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET

Elena Zapretilina (JSC "NIIEFA" (Efremov Institute), Doroga na Metallostroy, 3, St-Petersburg, Russian Federation)

Co-author in P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket

Agnieszka Zaras-Szydłowska (Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland)

Co-author in P2.206 Laser-driven accelerator of intense plasma beams for materials research

Arturs Zarins (Institute of Chemical Physics, University of Latvia, Jelgavas 1, LV-1004, Riga, Latvia;The Faculty of Natural Sciences and Mathematics, Daugavpils University, Parades 1a, LV-5401, Daugavpils, Latvia)

Co-author in P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities

Klaus-Dieter Zastrow (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Klaus-Dieter Zastrow (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

Klaus-Dieter Zastrow (Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P2.003 Technical rehearsal of DT operation at JET

Matteo Zaupa (Consorzio RFX, Padova, Italy)

Co-author in P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment

Zhanna Zaurbekova (Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan, Kurchatov, Kazakhstan)

Co-author in P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation

Zhanna Zaurbekova (Insitute of Atomic Energy NNC RK, st.Krasnoarmeyskaya, 2 buil.54 B, 071100, Kurchatov, Kazakhstan)

Co-author in P4.116 Study of tritium and helium generation and release from lithium-containing materials

Janez Zavasnik (Center for Electron Microscopy and Microanalysis, Jožef Stefan Institute, Ljubljana, Slovenia)

Co-author in P2.175 Tungsten carbide particles-reinforced tungsten for divertor

Christian Zeile (Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.120 Development of force reconstruction method on EU ITER TBM based on strain measurements

Daniele Zella (Consorzio RFX, C.so Stati Uniti 4, 35127 Padova, Italy)

Co-author in P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies

Qin Zeng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Long Zeng (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Qin Zeng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P3.163 The assessment of shutdown dose rate of HCSB during its replacement in CFETR

Yuhu Zhai (Engineering, Princeton Plasma Physics Laboratory, Princeton, United States)

Co-author in P3.058 Development of Load Specifications for the Design of ITER Diagnostic System and Port Integration

Xiangwei Zhai (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel

Tao Zhang (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)

Co-author in O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR

Haoran Zhang (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, China)

Co-author in P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket

Mingxing Zhang (Beihang University, Beijing, China)

Co-author in P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles

Weijun Zhang (Robotics Institute, Shanghai Jiao Tong University, Shanghai, China)

Co-author in P1.142 Design of a Standalone Joint Module toward Real EAST In-vessel Operation Use

Weijun Zhang (Robotics Institute,Mechanical Engineering School, Shanghai Jiaotong University, Shanghai City, China)

Co-author in P1.141 Structural Analysis and Stiffness Improvement for Flexible In-vessel Inspection System for EAST

Yu Zhang (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd, China)

Co-author in P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application

Jinghua Zhang (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Daihong Zhang (Max Planck Institut für Plasmaphysik, Greifswald, Wendelsteinstr. 1, Germany)

Co-author in P1.057 Real-time calibration parameter compensation of metal resistive bolometers operating in a thermal varying environment

Feng Zhang (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Han Zhang (Princeton Plasma Physics Laboratory, James Forestall Campus, Princeton, NJ 08542, United States)

Co-author in P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X

Jiping Zhang (Department of Physics and Engineering Physics, University of Saskatchewan, Saskatoon, Canada)

Co-author in P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak

Guanghui Zhang (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Chaodong Zhang (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Xiaokang Zhang (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui, China;Science Island Branch of Graduate School, University of Science and Technology of China, Hefei, Anhui, 230027, China)

Co-author in P2.157 Activation analysis of CFETR WCCB blanket

Shu Zhang (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.015 Particle density uniformity based global weight window generator in monte carlo particle transport simulation

Bo Zhang (ITER-China, Fuxing Road No. 15 B, Haidian District, Beijing 100038, China)

Co-author in P4.157 Gas distribution system manifold design for ITER gas injection system

Tao Zhang (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, China)

Co-author in P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm

Chen Zhang (Cadarache Center, CEA, Cadarache, France)

Co-author in P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics

Ming Zhang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, China, 1037 Luoyu Road, Wuhan, Hubei Province, 430074, China, China)

Co-author in P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter

Zhou Zhao (Center For Fusion Science, Southwestern Institute of Physics (SWIP), Chengdu, Sichuan, China)

Co-author in P4.201 Neutronics study on HCCB blanket for CFETR

Fengchao Zhao (Center For Fusion Science, Southwestern Institute of Physics (SWIP), Chengdu, Sichuan, China)

Co-author in P4.201 Neutronics study on HCCB blanket for CFETR

Yanyun Zhao (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei,Anhui, China)

Co-author in P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel

Pinghui Zhao (School of Nuclear Science and Technology, USTC, Hefei, China)

Co-author in P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method

Yanping Zhao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST

Pinghui Zhao (USTC, hefei, China)

Co-author in P1.160 The thermal analysis to pebble bed of CFETR

Yang Zhendong (Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei, China)

Co-author in P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST

Mingjie Zheng (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P1.194 Status and strategy of the study on the neutron irradiation damage of CLAM steel

S. Zheng (CCFE, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom)

Co-author in P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils

Shaotao Zheng (Institute of Materials, China Academy of Engineering Physics, Mianyang, China)

Co-author in P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo

Shanliang Zheng (CCFE, Culham Science Centre, Abingdon, United Kingdom)

Co-author in O5A.2 Fusion Reactor Start-up without an External Tritium Source

Huaqing Zheng (Institute of Nuclear Energy Safety Technology,Chinese Academy Sciences, Hefei, Anhui, China)

Co-author in P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application

Guoyao Zheng (Southwestern Institute of Physics, Chengdu, China)

Co-author in P1.122 Progress of engineering design and analysis of hl-2m advanced divertor

Jie Zheng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei Anhui, China)

Co-author in P1.158 Experimental study on effective thermal conductivity of pebble beds for fusion blankets

Jie Zheng (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei,Anhui, China)

Co-author in P1.159 Theoretical and Experimental Study on Effective Thermal Conductivity of Pebble Beds for Fusion Blanket

Guoyao Zheng (Center for Fusion Science, Southwestern Institute of Physics(SWIP), No.3,3rd Section, South of 2nd Ring Road, Chengdu, Sichuan , China, China)

Co-author in P4.049 Development of the control algorithm for advanced divertor configuration

Liu Zhihong (Institute of Plasma Physics Chinese Academy of Sciences , 350 Shushanhu Road, Hefei,Anhui 230031, China)

Co-author in P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box

Liu Zhihong (Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Road, Hefei,Anhui, China)

Co-author in P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D

W.L. Zhong (Southwestern Institute of Physics,, P. O. Box 432, 610041, Chengdu, China)

Co-author in P2.076 Design of phase contrast imaging on the HL-2A tokamak

Guangming Zhou (School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, China)

Co-author in P1.163 Safety analysis of the helium cooling system for the HCSB blanket of CFETR

Danna Zhou (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Qingjun Zhu (Institute of Plasma Physics Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P2.157 Activation analysis of CFETR WCCB blanket

Zhiqiang Zhu (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, hefei, China)

Co-author in P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA

Zhiqiang Zhu (Institute of Nuclear Energy Safety Technology (INEST), Hefei, Anhui, China)

Co-author in P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field

Haisheng Zhu (Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Science, Hefei, China)

Co-author in P4.085 Progress in the new EAST magnet feeders

Chen Zhu (School of Nuclear Sciences and Technology, University of Science and Technology of China, Hefei, Anhui, 230026, China)

Co-author in P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor

Ge Zhuang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science & Technology, Wuhan, China)

Co-author in P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M

Sixuan Zhuang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, China)

Co-author in P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER

Yi Zian (Institute of Plasma Physics Chinese Academy of Sciences , 350 Shushanhu Road, Hefei,Anhui 230031, China)

Co-author in P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box

Paweł Zienkiewicz (Institute of Electronic Systems, Faculty of Electronics and Information Technology, Warsaw University of Technology, Warsaw, Poland)

Co-author in P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics

Manfred Zilker (Max-Planck-Institut fuer Plasmaphysik, Garching D-85748, Germany)

Co-author in P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control

Steven Zinkle (University of Tennessee, Knoxville, TN, United States;Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831, United States)

Co-author in P1.106 Design of high-strength, high-conductivity, creep-resistant Cu alloys for fusion high heat flux structures

Kevin Zinn (Institute for Neutron Physics and Reactor Technology (INR), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P4.179 Mechanical testing of the IFMIF HFTM-DC prototype during operation in the HELOKA-LP helium loop

Kevin Zinn (Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany)

Co-author in P3.118 Characterization of the cooling channels of First Wall Mock-up dedicated to the HCPB-TBM qualification

Pietro Zito (Dipartimento Fusione e Tecnologie per la Sicurezza Nucleare (FSN), Enea, Via Enrico Fermi, 45 00044 Frascati (Roma), Italy)

Co-author in P2.082 Final tests of four switching network units procured by the European Union for JT-60SA

Pietro Zito (Department of Fusion and Technology for Nuclear Safety and Security, ENEA, Frascati, Italy)

Co-author in P2.011 The DTT device: power supply and electrical distribution system

Milan Zmitko (Fusion for Energy (F4E), Josep Pla 2, Barcelona, Spain)

Co-author in O5A.4 Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions

Milan Zmitko (Fusion for Energy, Barcelona, Spain)

Co-author in P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment

Milan Zmitko (ITER, Fusion for Energy (F4E), Barcelona, Spain)

Co-author in P1.146 The current status of the European ITER Test Blanket Modules development

Hartmut Zohm (MPI für Plasmaphysik, Garching, Garching, Germany)

Co-author in O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade

Hartmut Zohm (Max Planck Institute for Plasma Physics, 85748 Garching, Germany)

Co-author in P3.012 Fuelling technology for DEMO, state of the art

Hartmut Zohm (Max-Planck-Institut für Plasmaphysik, MPG, Garching, Germany)

Co-author in P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor

Hartmut Zohm (Max Planck Institute for Plasma Physics, Garching, Germany)

Co-author in P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink

Hartmut Zohm (IPP, Boltzmannstr. 2, Garching 85748, Germany)

Co-author in P2.192 The consequences of fundamental design choices for DEMO

Hartmut Zohm (IPP, Garching, Germany)

Co-author in O1B.1 Uncertainties in power plant design point evaluations

Hartmut Zohm (Max-Planck-Institute of Plasma Physics, Boltzmannstraße 2, 85748 Garching, Germany)

Co-author in P3.199 Improved fusion reactor designs as per integration of advanced systems code modules

Vasile Liviu Zoita (Institute of Atomic Physics, Magurele, Ilfov, Romania;National Institute for Laser, Plasma & Radiation Physics, Magurele, Ilfov, Romania)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Vasile Zoita (Plasma Phisics and Nuclear Fusion, National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania)

Co-author in P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications

V. L. Zoita (Institute of Atomic Physics, Bucharest, Romania)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

V. L. Zoita (Institute of Atomic Physics, Magurele, Ilfov, Romania)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

S. Zoletnik (Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest, Hungary)

Co-author in P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST

Sandor Zoletnik (Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, 29-33 Konkoly Thege Miklos ut, Budapest, XII., H-1121, Hungary)

Co-author in P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS

Sandor Zoletnik (Wigner Research Centre for Physics, Budapest, Hungary)

Co-author in P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X

Giuseppe Zollino (Department of Industrial Engineering, Università degli Studi di Padova, via Gradenigo 6a, 35131, Padova, Italy;Consorzio RFX, Corso Stati Uniti 4, 35127, Padova, Italy)

Co-author in P4.204 Economic assessment of different operational reactor cycle structures in a pulsed DEMO-like power plant

Massimo Zucchetti (Department of Energy, Polytechnic University of Turin, Turin, Italy)

Co-author in P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy

Massimo Zucchetti (DENERG, Politecnico di Torino, Torino, Italy)

Co-author in P4.016 Ignitor siting at the TRINITI site in Russian Federation
Co-author in P4.017 Feasibility study for an advanced nuclear fusion experiment

Guizhong Zuo (Institute of Plasma Physics ,Chinese Academy of Sciences, Hefei, China)

Co-author in O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak

Hideki Zushi (Advanced Fusion Research Center, RIAM, Kasuga, Japan)

Co-author in P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST

Alexander Zvonkov (Diagnostics, ITER Russia, Pl. Akademika Kurchatova, 1, Moscow, Russian Federation)

Co-author in P3.054 ITER Diagnostic Shutters

Izabela Zychor (National Centre for Nuclear Research, Otwock, Poland)

Co-author in P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET

I. Zychor (Institute of Plasma Physics and Laser Microfusion, Narodowe Centrum Badan Jadrowych,, 05-400 Otwock- Swierk, Poland)

Co-author in P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments

Izabella Zychor (Narodowe Centrum Badan Jadrowych, 05-400 Otwock, Poland)

Co-author in P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET

I. Zychor (Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Lisboa, Portugal)

Co-author in P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET

Choose timezone

29th Symposium on Fusion Technology (SOFT 2016)