08:30
|
Opening
(until 09:10)
(Congress Hall 2nd floor)
|
09:10
|
I1.1 B.Bigot
(until 09:50)
(Congress Hall 2nd floor)
|
09:10
|
I1.1 The ITER Project: Fusion Technology comes of age
-
Bernard Bigot
(ITER Organization)
(Congress Hall 2nd floor)
|
09:50
|
I1.2 T.Klinger
(until 10:30)
(Congress Hall 2nd floor)
|
09:50
|
I1.2 First operation of Wendelstein 7-X
-
Thomas Klinger
(Enterprise Wendelstein 7-X)
(Congress Hall 2nd floor)
|
10:45
|
--- Coffee break ---
|
11:15
|
I1.3 V.Tomarchio
(until 11:55)
(Congress Hall 2nd floor)
|
11:15
|
I1.3 Status of the JT-60SA Project: an overview on fabrication, assembly and future exploitation
-
V. Tomarchio
(JT-60SA EU-Home Team)
(Congress Hall 2nd floor)
|
11:55
|
--- SOFT prize winners ---
|
|
08:30
|
I2.1 S. Brezinsek
(until 09:10)
(Congress Hall 2nd floor)
|
08:30
|
I2.1 Plasma operation with full W divertor – experiences from JET equipped with the ITER-Like Wall
-
S. Brezinsek
(EUROfusion Consortium)
(Congress Hall 2nd floor)
|
09:10
|
I2.2 J. Li
(until 09:50)
(Congress Hall 2nd floor)
|
09:10
|
I2.2 Progresses and Activities on the Chinese Fusion Engineering Test Reactor
-
Jiangang Li
(for CFETR team)
(Congress Hall 2nd floor)
|
09:50
|
I2.3 R. Panek
(until 10:30)
()
|
09:50
|
I2.3 Design of the COMPASS Upgrade Tokamak
-
Radomir Panek
(Insitute of Plasma Physics CAS)
()
|
10:30
|
--- Coffee break ---
|
11:00
|
O2A
(until 12:20)
(Congress Hall 2nd floor)
|
11:00
|
O2A.1 Nanoscale characterisation of radiation damage in tungsten alloys
-
David Armstrong
(Department of Materials, Oxford University, Oxford, United Kingdom)
(Congress Hall 2nd floor)
|
11:20
|
O2A.2 Effect of Aging on Microstructural Evolution and Mechanical Properties in Ti-Bearing RAFM steels
-
Chang-Hoon Lee
(Korea Institute of Materials Science (KIMS))
(Congress Hall 2nd floor)
|
11:40
|
O2A.3 Grain size influence on the response of SPS tungsten to ELM-like thermal shock loading
-
Jiri Matejicek
(Department of Materials Engineering)
(Congress Hall 2nd floor)
|
12:00
|
O2A.4 Advanced Materials for a Damage Resilient Divertor Concept for DEMO
-
Jan Willem Coenen
(Institut für Energie- und Klimaforschung – Plasmaphysik)
(Congress Hall 2nd floor)
|
11:00
|
O2B
(until 12:20)
(Meeting Hall I 1st floor)
|
11:00
|
O2B.1 Plasma facing components for the European DEMO: advances in engineering designs
-
Thomas R. Barrett
(CCFE)
(Meeting Hall I 1st floor)
|
11:20
|
O2B.2 Development and analyses of self-passivating tungsten alloys for DEMO operational and accidental conditions
-
Tobias Wegener
(Institut für Energie- und Klimaforschung – Plasmaphysik)
(Meeting Hall I 1st floor)
|
11:40
|
O2B.3 Overview of the different processes of tungsten coating implemented into WEST tokamak
-
Mehdi Firdaouss
(CEA/IRFM)
(Meeting Hall I 1st floor)
|
12:00
|
O2B.4 Development of the flowing liquid lithium limiter for EAST tokamak
-
Qingxi Yang
(Institute of Plasma Physics)
(Meeting Hall I 1st floor)
|
11:00
|
O2C
(until 12:20)
(Meeting Hall V 2nd floor)
|
11:00
|
O2C.1 Manufacturing and test of the first ELM resilient long pulse ICRH antenna for WEST
-
Jean-Michel Bernard
(CEA/DRF/IRFM)
(Meeting Hall V 2nd floor)
|
11:20
|
O2C.2 Development of long-pulse high-power-density negative ion beams with a multi-aperture multi-grid accelerator
-
Atsushi Kojima
(Fusion Research and Development Directorate)
(Meeting Hall V 2nd floor)
|
11:40
|
O2C.3 Development of a high power helicon system for DIII-D
-
Joseph Tooker
(General Atomics)
(Meeting Hall V 2nd floor)
|
12:00
|
O2C.4 0-D Physical Design for the Heating and Current Drive System of CFETR
-
Defeng Kong
(Institute of Plasma Physics)
(Meeting Hall V 2nd floor)
|
|
08:30
|
I3.1 N. Mitchell
(until 09:10)
(Congress Hall 2nd floor)
|
08:30
|
I3.1 The ITER Magnet System: Configuration and Construction Status
-
N. Mitchell
(on behalf of the ITER Central Team)
(Congress Hall 2nd floor)
|
09:10
|
I3.2 R. Heidinger
(until 09:50)
(Congress Hall 2nd floor)
|
09:10
|
I3.2 The IFMIF-DONES Fusion Neutron Source
-
R. Heidinger
(Fusion for Energy)
(Congress Hall 2nd floor)
|
09:50
|
I3.3 U. Fischer
(until 10:30)
(Congress Hall 2nd floor)
|
09:50
|
I3.3 Methodological approach for DEMO neutronics in the European PPPT programme: Computational tools, data and analyses
-
U. Fischer
(Karlsruhe Institute of Technology)
(Congress Hall 2nd floor)
|
10:30
|
--- Coffee break ---
|
11:00
|
P3 Poster session
(until 12:20)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.001 6Li-D thermal-to-14 MeV neutron converter in the MARIA reactor for fusion materials related research
-
Anna Wojcik-Gargula
(Department of Radiation Transport Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.002 Rotating tritium target for intense 14-MeV neutron source
-
Sudhirsinh Vala
(Neutron Source Up-gradation Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.003 Accelerometers for boiling onset detection on beam stopper of LIPAc accelerator
-
Fernando Arranz
(Laboratorio Nacional de Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.005 Thermal validation of the start-up transient scenario of the EU IFMIF target assembly concept
-
Gioacchino Micciche
(FSN-ING-PAN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.006 Feasibility of IFMIF-DONES for other science projects
-
Wojciech Krolas
(Institute of Nuclear Physics PAN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.007 Swelling analysis and design optimization of the IFMIF target assembly with bayonet backplate
-
Gaetano Bongiovi
(Department of Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.008 Design, integration and manufacturing of the MEBT and DPlate support tables for IFMIF LIPAc
-
Oriol Nomen
(IREC)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.009 The Related Experimental Issues of PbLi Coolant by the Effect of Magnetic Field
-
Zhiqiang Zhu
(Institute of Nuclear Energy Safety Technology (INEST))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.011 Water Evaporation - Condensation Cooling System Design for Pb-Li17 Cold Trap
-
Tomas Romsy
(Faculty of Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.012 Fuelling technology for DEMO, state of the art
-
Bernhard Ploeckl
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.013 Overview and status of construction of ST40
-
Mikhail Gryaznevich
(Tokamak Energy Ltd)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.014 Manufacturing of a small scale Stellarator in Costa Rica
-
Carlos Otarola
(Electromechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.015 SST-1 up-gradation update & recent experiments in SST-1
-
Subrata Pradhan
(Institute for Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.018 The ITER EC H&CD Launcher: Handling of EC port cell equipment
-
Dennis Ronden
(Fusion physics - Remote Handling)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.019 Mechanical and seismic analyses of the ITER Electron Cyclotron Upper Launcher First Confinement System
-
Avelino Mas Sanchez
(Ecole Polytechnique Fédérale de Lausanne)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.020 Thermal mechanical analyses of mm-waveguide cooling concepts for the ITER ECHUL first confinement system
-
Phillip Santos Silva
(Swiss Plasma Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.021 Characterization of metallic seals used in the waveguide flange coupling of the ITER ECHUL
-
Robert Bertizzolo
(EPFL-SPC (Swiss Plasma Center))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.022 Development of a direct mirror angle detector for ITER EC launchers
-
Koji Takahashi
(Department of ITER Project)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.023 Demonstration of synchronous control of EC TL switch and gyrotron for ITER EC system
-
Yasuhisa Oda
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.024 Overview of the EU HV Power Supply System for the ITER EC System
-
Michael Bader
(Ampegon AG)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.025 Experimental verification of the european 1MW, 170GHz industrial CW porototype gyrotron for ITER
-
Tomasz Rzesnicki
(IHM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.026 Update of the cooling design if the ITER EC upper launcher
-
Peter Spaeh
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.027 Beam duct for the 1 MW neutral beam heating injector on TCV
-
Matthieu Toussaint
(Swiss Plasma Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.028 Commissioning of the heating neutral beam injector on the TCV tokamak
-
Damien Fasel
(SB-SPC)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.029 EMC improvement of an ECH power supplies system at TCV
-
Ugo Siravo
(Ecole Polytechnique Fédérale de Lausanne (EPFL))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.030 Neutral beam heating on the TCV tokamak
-
Alexander N. Karpushov
(Swiss Plasma Center (SPC))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.031 Fault Detection System for ICRF Transmission Line in LHD
-
Kenji Saito
(Department of Helical Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.032 Hybrid-order nonlinear resonant interaction between an Alfvén wave and ions
-
Haifeng Liu
(Institute of Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.033 ICRF system efficency
-
Helmut Faugel
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.034 Design of an ICRF system for plasma-wall interactions and plasma production studies on TOMAS
-
Fabrice Louche
(Plasma Physics Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.035 Microwave studio simulation results for two NSTX HHFW antennas in a test stand
-
Chun Kung
(Plasma Physics Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.036 Establishing the Wendelstein 7-X steady state control and data acquisition system
-
Anett Spring
(W7-X Operation)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.037 Experiences with the Segment Control system at Wendelstein 7-X operation
-
Heike Laqua
(Wendelstein 7-X Operations (OP))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.038 Application of the engineering standard for functional safety to the W7-X central safety system
-
Reinhard Vilbrandt
(Max-Planck-Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.039 Model-based optimal scenario planning in EAST
-
Hexiang Wang
(Mechanical Engineering & Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.040 Nonlinear burn control in tokamaks using In-vessel coils
-
Andres Pajares
(Mechanical Engineering & Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.041 Nonlinear sliding mode control of the current density profile in tokamaks
-
Eugenio Schuster
(Mechanical Engineering & Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.042 Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade
-
Zeki Ilhan
(Mechanical Engineering & Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.043 Real-time elaboration system for two-color medium-infrared scanning interferometer for electron density measurements on FTU
-
Luca Boncagni
(FSN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.044 Basic concepts and implementation strategy of the plasma discharge command sequencer for FTU Tokamak
-
Carlo Neri
(ENEA CR Frascati)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.045 Development of MPPC-based detectors for high count rate DT campaigns at JET
-
Andrzej Broslawski
(Narodowe Centrum Badan Jadrowych)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.046 Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments
-
Marian Curuia
(Institute of Atomic Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.047 CeBr3–based detector for Gamma Spectrometer Upgrade at JET
-
Roch Kwiatkowski
(National Centre for Nuclear Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.048 Conceptual design of a gamma-ray monitor for lost alpha particles in JET
-
Sorin Soare
(ICIT Rm. Valcea)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.049 Overview of property degradation of metallic mirrors for diagnostics in current and future reactors
-
Marek Rubel
(Fusion Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.050 Physical characterization of the JET operational space regarding EMLs by means of discriminant analysis
-
Jean-Marie Noterdaeme
(Applied Physics Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.051 Engineering design and analysis of an ITER-like first mirror test assembly on JET
-
Zsolt Vizvary
(CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.052 Remote handling connector development for the ITER divertor diagnostics
-
Janne Lyytinen
(Smart Industry and Energy Systems, VTT Technical Research Centre of Finland Ltd, Tampere, Finland)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.053 System engineering challenges of Tokamak Services for Diagnostics consortium
-
Miklos Palankai
(Plasma Physics Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.054 ITER Diagnostic Shutters
-
Christian Vorpahl
(Port Plugs & Diagnostics Integration Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.055 Can gas puffs be used for cleaning of the diagnostic first mirrors in ITER?
-
Vladislav Kotov
(Institut für Energie- und Klimaforschung – Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.056 Rigid and adjustable fixation of the shielding modules into the ITER port plugs
-
Laura Garcia-Ruesgas
(Department of Engineering Graphics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.057 Overview of the Loom Electrical Vacuum Interface preliminary design in ITER Equatorial Port #17
-
Jean-Marc Drevon
(Bertin Systèmes Instrumentation)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.058 Development of Load Specifications for the Design of ITER Diagnostic System and Port Integration
-
Yuhu Zhai
(Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.059 Development of real-time network translator between ITER Synchronous Data bus Network and reflective memory
-
Kwon Giil
(Control team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.060 Implementing a Neutron-Diagnostic use case in a PXIe platform through a 3D remote laboratory
-
Antonio Carpeno
(Telematics and Electronics Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.062 Integration of EPICS based monitoring for Ion Cyclotron High Voltage Power Supply
-
Hiteshkumar Dhola
(Power Supply Group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.063 EPICS device support for ATCA Board with hotplug capabilities
-
Bruno Santos
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.064 Taking advantage of intercommunication features of IPMCs to implement PCIe hot-plug in ATCA systems
-
Antonio Rodrigues
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.065 PCIe hot-plug event handling tasks using PICMG standard interrupt mechanism for ATCA based instrumentation
-
Paulo Carvalho
(IPFN/IST)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.066 Real-Time data acquisition Prototype proposal of the ITER radial neutron camera and gamma-ray spectrometer
-
Rita C. Pereira
(Instituto Superior Técnio)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.067 Embedded control systems for gyrotrons applications based on NI solutions
-
Jeremie Dubray
(Ecole Polytechnique Fédérale de Lausanne)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.068 Data acquisition system for LN2 cool down experiment for 6 nos. of cryogenics pumps
-
Karishma Qureshi
(Institute for Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.069 Commissioning and First Operation of the SPIDER Control and Data Acquisition System
-
Adriano Francesco Luchetta
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.070 A ‘Generic Tool’, adaptable to different configurations, to compute acting EM loads on Diagnostics
-
Eduardo Rodriguez
(Department of Construction and Manufacturing Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.071 Monte Carlo simulation of the neutron measurement for the Large Helical Device deuterium experiments
-
Takeo Nishitani
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.072 Fuzzy logic based model of bolometer detector sensors and cameras
-
Gabor Veres
(Department of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.073 The stand-alone optimized post-processing algorithms for plasma diagnostics
-
Rafał Krawczyk
(Institute of Electronic Systems)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.074 Influence of the geometry system on the effectiveness of polarimetric measurements in the thermonuclear plasma diagnostics
-
B. Bieg
(Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.075 Preliminary assessment of ex-vessel waveguides for the ITER Plasma Position Reflectometer
-
Jose Martinez-Fernandez
(Laboratorio Nacional de Fusión (LNF))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.076 Seismic Analysis of High-Power DC Reactor Prototype for ITER Poloidal Field Converter
-
Chuan Li
(State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.077 Free or confined arc model relevant to the quench hazard of large superconducting coils
-
Andrew Ash
(CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.078 Series Production of ITER Toroidal Field Coil Double Pancakes in Japan
-
Hideki Kajitani
(ITER department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.080 Performance analysis of ITER CSI coil and conductor 1A of the ITER CSMC
-
Roberto Bonifetto
(Energy Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.081 The ITER Central Solenoid Module final test facility*
-
Kurt Schaubel
(ITER CS Project)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.082 The design of the Residual Ion Dump Power Supply for ITER Neutral Beam Injector
-
Alberto Ferro
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.083 Final design of the HV deck1 and bushing for the ITER Neutral Beam Injector
-
Vanni Toigo
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.085 Modeling of ITER TF cooling system through 2D thermal analyses and enthalpy balance
-
Francesca Cau
(Fusion for Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.086 Energy dissipating resistors for the ITER switching network units
-
Rustam Enikeev
(Efremov Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.087 Type Tests of Switches for the ITER Coil Power Supply System
-
Maksim Manzuk
(Joint Stock Company "D.V. Efremov Institute of Electrophysical Apparatus")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.088 On optimization of air cooling system of FDR dissipating energy from ITER magnet coils
-
Victor Tanchuk
(JSC "NIIEFA")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.089 NSTX-U coils bus bars design and construction
-
Neway Atnafu
(Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.101 Tungsten and Iron sputtering properties over recrystallization temperature
-
Katsunao Uenishi
(Osaka University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.102 Measurement of tungsten optical absorption rate and dynamics of W melting behavior
-
Takeru Maeji
(Osaka University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.103 Molten layer characteristics of W materials and it’s protective coatings by pulsed laser irradiation
-
Daisuke Inoue
(Osaka University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.104 Secondary radiation damage and gas production in plasma facing materials under fusion neutron irradiation
-
Vladimir Khripunov
(Fusion Reactor Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.105 Microstructural and micro-mechanical changes in tungsten under high flux plasma exposure
-
Dmitry Terentyev
(SCK-CEN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.106 Ablation properties of plasma facing materials using thermal plasmas
-
Bong Guen Hong
(Chonbuk National University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.107 Helium ion irradiation of tungsten carbide neutron shields
-
Samuel A. Humphry-Baker
(Department of Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.108 Production of tungsten particles from a radiofrequency plasma jet
-
Valentina Marascu
(National Institute for Laser)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.109 Thermal management of tungsten leading edges in DIII-D and ITER
-
Richard E. Nygren
(Sandia National Laboratories)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.110 Study of deuterium retention in Be-W coatings with distinct morphologies
-
Rodrigo Mateus
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.111 High power fs laser irradiation of BeCW coatings
-
Liga Avotina
(Institute of Chemical Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.112 Material qualification of tungsten fibre-reinforced tungsten composite by means of tension tests
-
Hanns Gietl
(Max-Planck-Institut für Plasmaphysik (IPP))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.113 The emissivity of tungsten coatings deposited on carbon materials for fusion applications
-
Cristian Ruset
(Plasma Phisics and Nuclear Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.114 Dependence of damage depth profile on deuterium retention in C+ implanted W
-
Keisuke Azuma
(Graduate School of Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.115 Profile analysis of the first wall heat load required for demo blanket concept
-
Yuya Miyoshi
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.116 Thermal performance augmentation by detached rib-arrays for helium-gas cooled First Wall applications
-
Sebastian Ruck
(Institute of Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.117 Thermo-mechanical analyses and ways of optimization of the helium-cooled DEMO First-Wall under RCC-MRx rules
-
Julien Aubert
(DEN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.118 Characterization of the cooling channels of First Wall Mock-up dedicated to the HCPB-TBM qualification
-
Ali Abou-Sena
(Institute of Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.119 Optimization of first wall helium cooling system of European DCLL using CFD approach
-
Tomas Melichar
(Research Centre Rez)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.120 Development of force reconstruction method on EU ITER TBM based on strain measurements
-
Christian Zeile
(Karlsruhe Institute of Technology (KIT))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.121 Integral experiments of neutron transport in blanket module with hydrogen ion beam
-
Taishi Sugiyama
(Graduate school of energy science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.122 Analysis of Lorentz’s and Maxwell’s forces on DEMO segments under normal and off-normal conditions
-
Ivan Alessio Maione
(Institute for Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.123 Mechanical Analysis of WEST divertor support plate
-
Tristan Batal
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.124 First experiments with tungsten limiter on the T-10 tokamak
-
Sergey Grashin
(NRC "Kurchatov Institute")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.125 Status and plans of in-situ diagnostics based on synchrotron radiation scattering at station “Plasma”
-
Aleksey Arakcheev
(Budker Institute of Nuclear Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.126 Dust remobilization experiments on the COMPASS tokamak
-
Vladimir Weinzettl
(Institute of Plasma Physics of The Czech Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.127 Initial definition of load conditions in DEMO
-
Christian Bachmann
(Power Plant Physics and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.128 Progress in EU-DEMO In-Vessel Components integration
-
Fabio Cismondi
(Eurofusion-PPPT)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.130 Identification of Blanket design points using an integrated multi-physics approach
-
Gandolfo Alessandro Spagnuolo
(Institute for Neutron Physics and Reactor Technology (INR))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.131 Issues involved in the choice of low operating temperature for DEMO Eurofer divertor cassette
-
Giuseppe Mazzone
(Unità Tecnica Fusione)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.132 Systems engineering approach for pre-conceptual design of DEMO divertor cassette
-
Domenico Marzullo
(Department of Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.133 Shutdown dose rate assessment during replacement of in-vessel components for a fusion DEMO reactor
-
Youji Someya
(Sector of fusion research and development)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.134 Structural Assessments of the KDEMO Blanket Modules
-
Peter Titus
(Analysis Branch Mechanical Engineering Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.135 Rationale and Method for design of DEMO WCLL Breeding Blanket Poloidal Segmentation
-
Rocco Mozzillo
(Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.137 Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor
-
Hiroyasu Utoh
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.138 Dynamic Model Identification Method of Manipulator for inside DEMO Engineering
-
Ming Li
(Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.139 FFMECA and recovery strategies for ex-vessel remote maintenance systems in DEMO
-
Alberto Vale
(Instituto de Plasmas e Fusao Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.140 Impact on remote maintenance of varying aspect ratio and TF coil quantity for DEMO
-
Dan Wolff
(RACE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.142 Reliability prediction method for DEMO divertor remote maintenance concepts using stochastic Petri nets
-
Romain Sibois
(Remote Operation and Virtual Reality)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.143 ADITYA Upgrade Vacuum Vessel: Design, Construction, Testing, Installation and Operation
-
Kumarpalsinh Jadeja
(Institute for plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.144 Design optimization of structural components for the helical fusion reactor FFHR-d1 with challenging options
-
Hitoshi Tamura
(Department of Helical Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.145 Review of Hydrogen Isotopes Transport Parameter
-
Axel von der Weth
(INR-MET)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.146 H isotope thermo-diffusion in structural materials
-
Marta Malo
(Fundación UNED-Ciemat)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.147 Al2O3 coatings as barrier against corrosion in Pb-Li
-
Maribel C Gazquez
(Fusion National Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.148 Deuterium permeation behavior in iron-irradiated erbium oxide coating
-
Takumi Chikada
(Graduate School of Integrated Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.149 Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design
-
Keisuke Mukai
(IAM-KWT)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.150 Development of electron beam welding technologies for fabrication of the KO HCCR TBM
-
Jae Sung Yoon
(KAERI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.151 Design and fabrication of a Permeator Against Vacuum prototype for testing at Lead-Lithium facility
-
Belit Garcinuno
(Fusion Technology Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.152 Modeling blanket ferromagnetic loading using edge potential elements
-
Arthur Brooks
(Engineering Analysis)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.153 Sensitivity analysis of tritium retention in tungsten walls using a fusion reactor simulation code
-
Kenzo Ibano
(Graduate School of Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.154 Out-of-pile tritium adsorption/release behavior of advanced EU breeder pebbles
-
Matthias Kolb
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.155 Study on pssure resistance and separation of hydrogen isotopes of Palliadium packed columns
-
Zhenxing Liu
(Department of Reactor Engineering Research & Design)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.156 Quantifying TBR uncertainty due to nuclear data in fusion blanket modelling
-
Fred Thomas
(York Plasma Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.157 Neutron activation of impurity seeding gases within a DEMO environment
-
Richard Walker
(CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.158 Breeding Blanket Nuclear Analysis and Nuclear Data Transfer For Multiphysics Analysis Using Attila
-
Jonathan Klabacha
(Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.159 Coupled neutronic and engineering analysis of the Helium Cooled Pebbled Bed with Be12Ti
-
Jonathan Shimwell
(Culham Centre for Fusion Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.160 Post-irradiation examination of EU Li4SiO4 reference breeder material from the HICU experiment
-
Julia M. Heuser
(Institute for Applied Materials (IAM))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.161 Post irradiation examination of High Dose irradiated Beryllium (HIDOBE-02) in the High Flux Reactor
-
Lida Magielsen
(Research and Innovation)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.162 Effects of temperature and hydrogen pressure on the activation behavior of ZrCo
-
Huaqin Kou
(Institute of Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.163 The assessment of shutdown dose rate of HCSB during its replacement in CFETR
-
Wei Li
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.164 Passive decay heat removal for solid breeder blanket
-
Hyoseong Gwon
(Department of Blanket System Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.165 Fabrication of Li2TiO3 Pebbles for Tritium Breeding Material by Solid-state Reaction Process
-
Yi-Hyun Park
(TBM Technology Team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.166 Development of surface modification of beryllide pebbles with no-hydrogen generation reaction with steam
-
Masaru Nakamichi
(Sector of Fusion Research and Development)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.167 Li mass loss from Li2TiO3 fabricated by the emulsion method under optimized condition
-
Ryoutarou Yamamoto
(Advanced of Energy Engineering science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.168 Compression fracture strength change of tritium breeder pebbles caused by Li vaporization
-
Yu Otani
(Prime Mover Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.169 Li vaporization property of candidate materials for tritium breeder with high Li density
-
Kiyoto Shin-mura
(Course of Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.170 Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities
-
Arturs Zarins
(Institute of Chemical Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.171 Discrete element modelling of ellipsoidal particles for fusion applications
-
Marigrazia Moscardini
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.172 Displacement damage effect on the thermal stability of deuterium in SiC
-
Fernando Sanchez
(National Fusion Laboratory (LNF))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.173 Radiation exposure effect on deuterium retention in SiC
-
Yasuhisa Oya
(College of Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.174 Study on the corrosion behavior of CVD and CVI SiC materials with liquid Pb–Li under rotating flow
-
Changho Park
(Japan Agency for Quantum and Radiological Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.175 Radiation induced deuterium absorption dependence on temperature, dose rate, and gas pressure for SiC
-
Enrique Ascasibar
(National Fusion Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.176 Benchmark experiment on copper with graphite by using DT neutrons at JAEA/FNS
-
Saerom Kwon
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.178 Benchmark experiment on molybdenum with graphite by using DT neutrons at JAEA/FNS
-
Masayuki Ohta
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.179 Synthesis, Microstructural Characterization and Nanoindentation of Ti2SnC MAX Phase
-
Snejana Bakardjieva
(Institute of Inorganic Chemistry AS CR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.180 Yttrium oxide coatings as tritium permeation barriers
-
Jan Engels
(Institut für Energie- und Klimaforschung – Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.181 On the phase transitions of Y2O3 in ultrafine grained W-Y2O3 composite
-
Monika Vilemova
(Materials Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.182 Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers
-
Sven-Erik Wulf
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.183 Fatigue life of tungsten materials strengthened by various methods
-
Shuhei Nogami
(Department of Quantum Science and Energy Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.184 Diffusion-controlled F center thermal annealing in neutron, electron and heavy-ion irradiated insulators
-
Anatoli Popov
(Institute of Solid State Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.186 Formation of Cr2O3 layers on coolant duct materials for suppression of hydrogen permeation
-
Teruya Tanaka
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.187 Deuterium permeation behavior of tritium permeation barrier coating containing carbide nanoparticles
-
Jumpei Mochizuki
(Shizuoka University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.188 Deuterium permeation and retention behaviors in erbium oxide-iron multilayer coatings
-
Seira Horikoshi
(Graduate School of Integrated Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.190 Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications
-
Hynek Hadraba
(Institute of Physics of Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.191 Fracture toughness of the new generation ODS steels with different oxide compositions
-
Filip Siska
(Institute of Physics of Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.192 Tungsten/Steel Composites for the application in Functionally Graded Interlayers at the armor-substrate transition zone of the first wall
-
Simon Heuer
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.193 Probabilistic safety classification approach for SSCs of fusion reactors
-
Ming Sun
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.194 Research of Failure Data Adjust Method and Application for Tritium Extraction System
-
Miao Nie
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.195 RAMI analysis for EAST in-vessel components cooling system
-
Shijun Qin
(Tokamak Design Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.196 Operational behaviour of a passive auto-catalytic recombiner under low pressure conditions
-
Paul-Martin Steffen
(Institute of Energy and Climate Research – Nuclear Waste Management and Reactor Safety (IEK-6))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.197 Reference accident sequences for a demonstration fusion power plant
-
Tonio Pinna
(Nuclear Fusion and Safety Technologies Department (FSN-FUSTEC-TEN))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.198 The Development of an assessment framework to evaluate DEMO plant concept options
-
Richard Brown
(PMU)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.199 Improved fusion reactor designs as per integration of advanced systems code modules
-
Fabrizio Franza
(Institute for Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.200 Improved Solid Decomposition Algorithms for the CAD-to-MC Conversion Tool McCad
-
Lei Lu
(Neutronics and Nuclear Data Group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.201 Primary Heat Transfer System design and safety evaluation for WCCB blanket sectors of CFETR
-
Xiaoman Cheng
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.202 Plasma protection module design of the ITER CIS fast architecture
-
Taehyun Tak
(KSTAR Control Research Team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.203 ITER Generic Diagnostics Ports nuclear analysis
-
Rafael Juarez
(Departamento de Ingeniería Energética)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.204 A novel approach to improve the calculation efficiency of the GVR method
-
Jia Li
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.205 Hiearchical CAD-based modeling methods in SuperMC and its application in ITER C-lite model
-
Shengpeng Yu
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.206 Interfacing ATCA hot swap with PCIe hot plug for high-availability instrumentation in critical systems
-
Miguel Correia
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
11:00
|
P3.207 Benchmarking of SuperMC activation calculation function and its application in ITER
-
Qi Yang
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
|
08:30
|
I4.1 R. Vila
(until 09:10)
(Forum Hall 2nd floor)
|
08:30
|
I4.1 European-WP development on functional materials for diagnostics and H&CD systems in future fusion reactors
-
Rafael Vila
(Fusion Materials Unit)
(Forum Hall 2nd floor)
|
09:10
|
I4.2 V. Toigo
(until 09:50)
(Forum Hall 2nd floor)
|
09:10
|
I4.2 A substantial step forward in the realization of the ITER HNB system: the ITER NBI test facility
-
V. Toigo
(Consorzio RFX)
(Forum Hall 2nd floor)
|
09:50
|
I4.3 H. Fuenfgelder
(until 10:30)
(Forum Hall 2nd floor)
|
09:50
|
I4.3 A double success story: the international cooperation to built the new ICRF antennas on ASDEX - Upgrade and the results obtained
-
H. Fuenfgelder
(Max-Planck-Institut für Plasmaphysik)
(Forum Hall 2nd floor)
|
10:30
|
--- Coffee break ---
|
11:00
|
O4A
(until 12:20)
(Forum Hall 2nd floor)
|
11:00
|
O4A.1 Response of the imaging cameras to hard radiation during JET operation
-
Alexander Huber
(Forschungszentrum Jülich GmbH)
(Forum Hall 2nd floor)
|
11:20
|
O4A.2 RAMI analysis of the ITER LFS CTS system
-
Elsa Henriques
(LAETA, IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal)
(Forum Hall 2nd floor)
|
11:40
|
O4A.3 A control and data acquisition platform for critical systems
-
Jorge Sousa
(Instituto de Plasmas e Fusão Nuclear)
(Forum Hall 2nd floor)
|
12:00
|
O4A.4 First direct comparative test of single crystal rhodium and molybdenum mirrors for ITER diagnostics
-
Andrey Litnovsky
(Forschungszentrum Jülich)
(Forum Hall 2nd floor)
|
11:00
|
O4B
(until 12:20)
(Meeting Hall I 1st floor)
|
11:00
|
O4B.1 Potential approach of IR-analysis for HHF quality assessment of ITER tungsten divertor targets
-
Henri Greuner
(Max-Planck-Institut für Plasmaphysik)
(Meeting Hall I 1st floor)
|
11:20
|
O4B.2 Fabrication and acceptance of ITER vertical target divertor full scale plasma facing units
-
Eliseo Visca
(Department of Fusion and Technology for Nuclear Safety and Security)
(Meeting Hall I 1st floor)
|
11:40
|
O4B.3 DiMES PMI research at DIII-D in support of ITER and beyond
-
Dmitry Rudakov
(Center for Energy Research)
(Meeting Hall I 1st floor)
|
12:00
|
O4B.4 HELCZA – High Heat Flux Test Facility for Testing ITER EU First Wall Components
-
Jan Prokupek
(Technological Experimental Loops)
(Meeting Hall I 1st floor)
|
11:00
|
O4C
(until 12:20)
(Meeting Hall V 2nd floor)
|
11:00
|
O4C.1 Development of High Intensity D-T fusion NEutron Generator (HINEG)
-
Chao Liu
(Key Laboratory of Neutronics and Radiation Safety)
(Meeting Hall V 2nd floor)
|
11:20
|
O4C.2 Resolving Safety Issues for a Demonstration Fusion Power Plant
-
Neill Taylor
(Culham Centre for Fusion Energy)
(Meeting Hall V 2nd floor)
|
11:40
|
O4C.3 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB and HCLL TBS accident analyses
-
Andrew Grief
(Amec Foster Wheeler)
(Meeting Hall V 2nd floor)
|
12:00
|
O4C.4 Beryllium dust behaviour during ITER LOCA accident
-
Francois Virot
(IRSN)
(Meeting Hall V 2nd floor)
|
|
08:30
|
I5.1 O. Neubauer
(until 09:10)
(Forum Hall 2nd floor)
|
08:30
|
I5.1 Diagnostics for First Operation of the Wendelstein 7-X Stellarator
-
Olaf Neubauer
(Forschungszentrum Jülich GmbH)
(Forum Hall 2nd floor)
|
09:10
|
I5.2 E. Tsitrone
(until 09:50)
(Forum Hall 2nd floor)
|
09:10
|
I5.2 WEST Project status and Research plan towards ITER risk mitigation
-
E. Tsitrone
(CEA)
(Forum Hall 2nd floor)
|
09:50
|
I5.3 R. Albanese
(until 10:30)
(Forum Hall 2nd floor)
|
09:50
|
I5.3 Design and definition of a Divertor Tokamak Test facility
-
R. Albanese
(on behalf of the EUROfusion WPDTT2 team & the DTT report contributors)
(Forum Hall 2nd floor)
|
10:30
|
--- Coffee break ---
|
11:00
|
I5.4 F. Warmer
(until 11:40)
(Forum Hall 2nd floor)
|
11:00
|
I5.4 The advanced stellarator concept beyond W7-X: motivation and options for a burning plasma stellarator
-
F. Warmer
(Max Planck Institute for Plasma Physics)
(Forum Hall 2nd floor)
|
11:40
|
I5.5 P. Bastistoni
(until 12:20)
(Forum Hall 2nd floor)
|
11:40
|
I5.5 Nuclear fusion technology in conjunction with DT operations at JET in support of ITER
-
P. Batistoni
(EUROfusion Consortium)
(Forum Hall 2nd floor)
|
|
12:35
|
--- Lunch break ---
|
14:20
|
P1 Poster session
(until 16:00)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.001 Comparative study between code and analytical stress intensification factor in ITER cooling system piping
-
Aditya Singh
(Cooling Water System)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.002 Design and Structural Analysis of the Upending Tool
-
Jinho Bae
(Tokamak Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.003 Structural analysis for final design of ITER sector sub-assembly tool
-
Min-Su Ha
(Tokamak Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.004 SHe cooling performance evaluation of 600 W Helium Refrigerator/liquefier with variable temperature supplies
-
Akifumi Iwamoto
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.005 Structural Integrity Analysis of ITER Gas Distribution System Manifolds
-
Chengzhi Cao
(Southwestern Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.006 Detailed design of ITER CCWS, CHWS and HRS: Challenges experienced and their solutions
-
Ajith Kumar
(Cooling Water System)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.007 Mechanical design solution for cold water basin of ITER Heat rejection system
-
Dinesh Gupta
(Cooling water system group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.008 Preliminary design of local magnetic shield for solenoid valve in FPSS of ITER gis
-
Zhiwei Xia
(Southwestern Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.009 First evaluation of cryogenic performance of Wendelstein 7-X cryostat
-
Michael Nagel
(Wendelstein 7-X Operation)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.010 Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X
-
Chandra Prakash Dhard
(Max-Planck-Institut fuer Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.011 Influence of deviations in the coil geometry on Wendelstein 7-X plasma equilibrium properties
-
Tamara Andreeva
(Max-Planck-Institut fuer Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.012 A software eco-system for the integrated design of W7-X
-
Sebastien Renard
(Institute for Magnetic Fusion Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.013 Monitoring of W7-X Cryostat Commissioning with Cryostat System FE Model
-
Paul van Eeten
(Max-Planck-Institut fur Plasmaphysik, Device Operation, Greifswald, Germany)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.014 Tokamak COMPASS-Upgrade support structure study
-
David Sestak
(Institute of Plasma Physics at the Czech Academy of Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.015 Integration design platform of CFETR
-
Minyou Ye
(School of Nuclear Sciences and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.016 Study of current ramp up for the China Fusion Engineering Test Reactor
-
Li Liu
(School of Nuclear Sciences and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.017 Comparison of HESEL SOL turbulence simulations with BES measurements on EAST
-
Gergo Pokol
(Institute of Nuclear Techniques)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.018 Properties of plasma injected in open magnetic trap from independent UHF source
-
Sulkhan Nanobashvili
(Andronikashvili Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.019 Measurement of flow velocity during natural convection in nanofluids
-
Konstantinos Kouloulias
(Department of Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.020 Fabrication of DLC cone for fast ignition experiment
-
Mayuko Koga
(Graduate School of Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.021 Installation and site testing of the SPIDER Ion Source and Extraction Power Supplies
-
Andrea Zamengo
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.022 The transmission line for the SPIDER experiment: from design to installation
-
Marco Boldrin
(Consorzio RFX (CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.023 Implementation of the SPIDER Central Interlock
-
Cesare Taliercio
(Consorzio RFX, Padova, Italy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.024 SPIDER High Voltage Bushings: design, development and first experimental tests
-
Nicola Pilan
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.025 Manufacturing and assembly of the cooling plant for SPIDER experiment
-
Francesco Fellin
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.026 The 10-MW EPSM Modulator and other KIT FULGOR Gyrotron Test Facility key components
-
Martin Schmid
(Institute of Pulsed Power and Microwave Technology (IHM))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.027 Electron Emission Under Uniform Magnetic Field of Materials For Fusion And Spatial Applications
-
Nicolas Fil
(Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.028 High power test of a temperature controlled diplexer for electron cyclotron current drive system
-
Mikio Saigusa
(College of Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.029 Coupled thermal-hydraulic and thermal-mechanical analysis of a 1MW gyrotron cavity cooled by mini-channels
-
Andrea Bertinetti
(Politecnico di Torino)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.030 Physics-based modelling of the ECRH system for MHD control applications
-
Christos Tsironis
(Electrical and Computer Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.031 Recent results on ECR assisted plasma start-up, current drive and discharge cleaning in SST-1
-
Braj Shukla
(ECRH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.032 Design of dual-frequency transmission lines for the ECRH systems on HL-2M
-
Donghui Xia
(State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.033 Electron cyclotron stray radiation detection and machine protection system proposal for JT-60SA
-
Alessandro Moro
(Istituto di Fisica del Plasma "Piero Caldirola" IFP-CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.034 Development of an ICRH antenna system at W7-X for plasma heating and wall conditioning
-
Bernd Schweer
(Laboratory for Plasma Physics LPP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.035 Characterization and performance improvement of large titanium sublimation pumps in AUG and W7-X NBI
-
Guillermo Orozco
(ITED)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.036 Fabrication of the ICRF antenna of ASDEX-U device
-
Yang Qing Xi
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.037 Helium neutral beam injection into ASDEX Upgrade
-
Christian Hopf
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.038 Extension of heating and pulse power capabilities at ASDEX Upgrade
-
Claus-Peter Kasemann
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.039 Simulation of burn control for DEMO using ASTRA coupled with Simulink
-
Filip Janky
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.040 A SysML model of the tokamak subsystems involved in a DEMO pulse
-
Ian Jenkins
(CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.041 Progress of DEMO physics design study in Japan
-
Yoshiteru Sakamoto
(Department of Fusion Power Systems)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.042 Conceptual design study of pellet fuelling system for DEMO
-
Shinsuke Tokunaga
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.043 Detection of Neoclassical Tearing Modes in DEMO using the Electron Cyclotron Emission
-
Natale Rispoli
(Istituto di Fisica del Plasma “Piero Caldirola” - IFP-CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.044 A 3D Electromagnetic Model of the Iron Core in JET
-
Francesco Pizzo
(Department of Industrial and Information Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.045 Real time control developments at JET in preparation for deuterium-tritium operation
-
Morten Lennholm
(Jet Exploitation Unit)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.046 Plasma equilibrium based on RF-driven current profile without assuming nested magnetic surfaces on QUEST
-
Kazuo Nakamura
(Nuclear Fusion Dynamics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.047 Equilibrium modelling of merging compression startup in a spherical tokamak
-
Peter Buxton
(Tokamak Energy Ltd)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.048 F4E prototype of a chopper digital integrator for the ITER magnetics
-
Antonio Batista
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.049 Design development, integration and assembly of the ITER steady-state magnetic sensors
-
Martin Kocan
(Fircroft Engineering Services Ltd)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.050 Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics
-
Ivan Duran
(Tokamak)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.051 Signal processing for the extreme environment Hall sensors
-
Slavomir Entler
(Institute of Plasma Physics of the CAS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.052 Performance assessment of critical waveguide bends for the ITER in-vessel plasma position reflectometry systems
-
Jorge Belo
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.053 Electromagnetic analysis of the in-vessel ITER plasma-position reflectometry antennas
-
Paulo Quental
(IPFN - Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.054 Diamond Window Diagnostics Concepts For Fusion Reactors - Updates of the Design
-
Francesco Mazzocchi
(IAM- AWP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.055 Conceptual design and dynamic simulation of a fast-ion loss detector for ITER
-
Juan Ayllon
(CNA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.056 Conceptual studies for the management of thermal properties of ITER bolometer cameras
-
Gabor Nadasi
(Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.057 Real-time calibration parameter compensation of metal resistive bolometers operating in a thermal varying environment
-
Florian Penzel
(Max Planck Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.058 ITER Erosion/Deposition Monitor Diagnostic
-
Nancy Ageorges
(Kampf Telescope Optics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.060 The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign
-
Nicola Fonnesu
(Department of Fusion and Nuclear Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.061 Hardware architecture the JET Neutron Camera Upgrade (NCU) new data acquisition and processing system
-
Marco Riva
(Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.064 Calculation of the profile dependent neutron backscatter matrix for the JET neutron camera system
-
Federico Binda
(Physics and Astronomy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.066 Characterization of a neutron generator for the JET monitoring system calibration with NE-213 spectrometer
-
Axel Klix
(Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.067 Beam emission spectroscopy diagnostic based on neutral beam in EAST tokamak
-
H.J. Wang
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.068 Divertor heat flux study of L-H transition with different auxiliary heating in EAST
-
Bo Shi
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.069 The WEST Plasma Facing Components Protection
-
Jean-Marcel Travere
(CEA/IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.070 Measurements and controls implementation for the WEST project
-
Philippe Moreau
(Institut de Recherches sur la Fusion par confinement Magnétique)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.071 Measurement of surface temperature of the plasma facing component with Multi-Spectral Infrared thermography diagnostics
-
Chen Zhang
(Cadarache Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.072 Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic
-
Hiroshi Tojo
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.073 Progress of the magnetic sensors development for JT-60SA
-
Manabu Takechi
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.074 Feasibility study on the JT-60SA tokamak beam emission spectroscopy diagnostic systems
-
Ors Asztalos
(Institute of Nuclear Techniques)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.075 Upgraded electromagnetic measure system for RFX-mod
-
Giuseppe Marchiori
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.077 Development of optical probe for local emission profile measurements in VEST
-
Jae-young Jang
(Department of Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.078 Design of combined system of charge exchange spectroscopy and beam emission spectroscopy in VEST
-
YooSung Kim
(Department of Nuclear Enigneering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.079 Development of multi-pass Thomson scattering diagnostic system for VEST
-
Young-Gi Kim
(Department of Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.080 Development of diagnostic neutral beam injector for charge exchange spectroscopy in VEST
-
Kihyun Lee
(Department of Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.081 Development of the bronze processed Nb3Sn multifilamentary wires using Cu-Sn-Zn ternary alloy matrix
-
Yoshimitsu Hishinuma
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.082 A DEMO relevant long leg divertor with external poloidal field coils
-
Simon McIntosh
(Culham Centre for Fusion Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.083 Experimental stand for thermal-hydraulic tests of forced flow conductors using water at room temperature
-
Aleksandra Dembkowska
(Faculty of Mechanical Engineering and Mechatronics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.084 Analysis of partial blockage of the coolant in a TF coil of the EU-DEMO
-
Alberto Brighenti
(Energy Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.085 DEMO-EUROFusion Tokamak, design of TF coil inter-layer splice joint
-
Boris Stepanov
(EPFL-SPC)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.086 Cost Estimate for the Toroidal Field Coil System of DEMO
-
Pierluigi Bruzzone
(Swiss Plasma Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.087 Thermal-Hydraulic and Quench Analysis of the DEMO Toroidal Field Winding Pack WP1
-
Kamil Sedlak
(Swiss Plasma Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.088 Towards a multi-physic platform for fusion magnet design – Application to DEMO TF coil
-
Quentin Le Coz
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.089 Central solenoid winding pack design
-
Rainer Wesche
(SPC)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.090 Mechanical pre-dimensioning and pre-optimization of tokamaks’ toroidal coils featuring a winding pack layout
-
Anatoly Panin
(Forschungszentrum Juelich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.091 The tilted toroidal field coil concept for advanced tokamaks
-
Renato Gatto
(Department of Astronautical)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.092 Conceptual design study of toroidal field magnet system of SST-2 fusion reactor
-
Aashoo Sharma
(Institute for Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.094 The preassembly of the tokamak T-15MD magnet system
-
Petr Khvostenko
(NRC"Kurchatov Institute")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.095 Joint testing of the 3 Tesla ST40 spherical tokamak toroidal field coil test assembly
-
Bill Huang
(Tokamak Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.096 HTS CroCo for future fusion magnets
-
Walter H. Fietz
(Karlsruhe Institute of Technology (KIT))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.101 Characterization of the particles dispersion in W-Ti and W-V alloys by SANS
-
Angel Munoz
(Departamento de Física)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.103 Potential irradiation of Cu alloys and tungsten samples in DONES
-
Fernando Mota
(Laboratorio Nacional de Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.104 Melt infiltrated W-Cu composites as advanced heat sink materials for plasma facing components
-
Alexander von Muller
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.105 Mechanical characterization of electrochemically based W–Cu joints for low temperature heat sink application
-
Wolfgang Krauss
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.106 Design of high-strength, high-conductivity, creep-resistant Cu alloys for fusion high heat flux structures
-
Steven Zinkle
(University of Tennessee)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.107 Residual stresses evaluation during Plasma Facing Units Hot Radial Pressing manufacturing process
-
Selanna Roccella
(FSN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.108 Influence of divertor material modifications on the inventory of tritium in the divertor region
-
Mihails Halitovs
(University of Latvia)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.109 Investigation of hydrogen isotopes interaction with lithium CPS under reactor irradiation
-
Timur Kulsartov
(Institute of Atomic Energy of National Nuclear Center of the Republic of Kazakhstan)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.110 Erosion and morphology changes of F82H steel under simultaneous hydrogen and helium irradiation
-
Koki Yakusiji
(Osaka university)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.111 Implementation of ferritic steel as in vessel wall: Lessons learnt and followed up
-
Irene Zammuto
(Max Planck Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.112 Effect of engineering constraints on charged particle wall heat loads in DEMO
-
Francesco Maviglia
(Power Plant Physics & Technology Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.113 Effect of ELMs on PFC of DEMO reactor
-
Yuri Igitkhanov
(ITEP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.114 Integrated core-SOL-divertor modelling for DEMO with tin divertor
-
Michal Poradzinski
(Department of Nuclear Fusion and Plasma Spectroscopy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.115 Physics design study of the divertor power handling in 8m-sized DEMO reactor
-
Kazuo Hoshino
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.116 Progress in the initial design activities for the European DEMO divertor
-
Jeong-Ha You
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.117 Advances of the Design Study of ITER-like divertor target for DEMO
-
Fabio Crescenzi
(Fusion and Technology for Nuclear Safety and Security)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.118 Development of a graded W/CuCrZr divertor for DEMO reactor
-
Franklin Gallay
(CEA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.119 Analysis of steady state thermal-hydraulic behaviour of the DEMO divertor cassette body cooling circuit
-
Eugenio Vallone
(Dipartimento di Energia)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.120 Thermal-hydraulic behaviour of the DEMO divertor plasma facing components cooling circuit
-
Silvia Garitta
(Dipartimento di Energia)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.121 Electromagnetic and structure analysis for EAST vacuum vessel with plasma facing components during VDE
-
Sumei Liu
(School of Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.122 Progress of engineering design and analysis of hl-2m advanced divertor
-
Lijun Cai
(Southwestern Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.123 Cooling concepts for CFETR divertor target
-
Xuebing Peng
(Insititute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.124 Evaluation of heat load on CFETR divertor for impurity seeding using SOLPS
-
Xiaoju Liu
(Institute of plasma physics chinese academy of sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.125 In vessel electrical integraton in ITER Tokamak
-
Jorge Gonzalez
(RÜECKER LYPSA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.127 Manufacturing progress of first delivery sectors of ITER vacuum vessel thermal shield
-
Dong Kwon Kang
(ITER Korea)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.128 Nuclear responses in the ITER IVVS port cell
-
Davide Flammini
(Department of Fusion and Nuclear Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.129 High spatial resolution heating for the ITER vacuum vessel with updated C-lite MCNP model
-
Anton Travleev
(INR-NK)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.130 Influence of welding on stiffened box structure during fabrication of ITER VV Inboard Segment
-
Kwen-Hee Hong
(Tokamak Engineering Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.131 Design, Validation and Manufacturing of ITER Vacuum Components, & Leak Localization
-
Liam Worth
(ITER Organization)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.132 Reliability analysis of the ITER LCTS double plate support
-
Chang Hyun Noh
(NFRI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.133 Specific design and structural issues of single crystalline first mirrors for diagnostics
-
Yury Krasikov
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.134 ESPN regulation applied to the Port Plug Structure for ITER Diagnostic system
-
Thibaud Giacomin
(Port Plugs & Diagnostics Integration Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.135 Ultra-sensitive ultrasonic testing method on bi-metallic explosion plate for ITER low-temperature superconducting joint box
-
Jiang Beiyan
(Hefei Juneng Electro Physics High-tech Development Co.)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.136 Thermo-mechanical analysis of the Tore Supra WEST Cooling Water System
-
Stephane Gazzotti
(CEA IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.137 Qualification, manufacturing and assembly of the WEST divertor structure and coils
-
Louis Doceul
(CEA Cadarache)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.138 Manufacturing and Installation of the JT60-SA Helium Storage Vessels for the Cryogenic Plant
-
Antonino Cardella
(Broader Fusion Development)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.140 Three-dimensional condensation regime of steam injected into water at sub-atmospheric conditions
-
D. Mazed
(Department of Civil and Industrial Engineering (DICI))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.141 Structural Analysis and Stiffness Improvement for Flexible In-vessel Inspection System for EAST
-
Weijun Zhang
(Robotics Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.142 Design of a Standalone Joint Module toward Real EAST In-vessel Operation Use
-
Liang Du
(Robotics Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.143 Vibration suppression control of EAMA/EAST Articulated Maintenance Arm
-
Jing Wu
(Institute of Plasma Physics Chinese Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.144 Error compensation strategy of EAST articulated maintenance arm robot based on static stiffness modeling
-
Shanshuang Shi
(Lab of Intelligent Machines)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.145 Design status of DEMO blanket primary heat transfer system
-
Dario Carloni
(KIT)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.146 The current status of the European ITER Test Blanket Modules development
-
Milan Zmitko
(ITER)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.147 Status of the platform for integration and maintenance tests of the European TBM systems
-
Ladislav Vala
(Centrum výzkumu Řež)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.148 Nuclear Maintenance strategy and first steps for preliminary maintenance_plan of European Test Blanket Systems
-
Jose Galabert
(Fusion for Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.149 Myth of initial loading tritium : modelling DEMO fuel system in power ascension tests
-
Satoshi Konishi
(Institute of Advanced Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.150 D-T fuel system of DEMO-FNS tokamak with tritium breeding blanket
-
Sergey Ananyev
(Complex physical and chemical technologies)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.151 An equation of state for lead lithium eutectic
-
Paul Humrickhouse
(Fusion Safety Program)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.152 A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances
-
Francisco A. Hernandez Gonzalez
(Institute of Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.153 Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO
-
Pavel Pereslavtsev
(Karlsruhe Institute for Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.154 Radiation effects on the chemical stability and deuterium extraction capability for ceramic breeders
-
Alejandro Morono
(National Fusion Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.155 Deuterium thermally induced desorption for HCPB breeder compositions during electron irradiation at relevant temperatures
-
Maria Gonzalez
(LNF-DTF)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.156 DNS of Turbulent Heat Transfer in pipe flow via MPI+OpenMP for multi-CPU
-
Shin-ichi Satake
(Applied Electronics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.157 Effective thermal conductivity of advanced breeder pebble beds
-
Simone Pupeschi
(Institute for Applied Materials (IAM))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.158 Experimental study on effective thermal conductivity of pebble beds for fusion blankets
-
Shuang Wang
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.159 Theoretical and Experimental Study on Effective Thermal Conductivity of Pebble Beds for Fusion Blanket
-
Hongli Chen
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.160 The thermal analysis to pebble bed of CFETR
-
Yuanjie Li
(USTC)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.161 Thermal analyses of beryllide pebbles in water vapor atmosphere as advanced neutron multipliers
-
Jae-Hwan Kim
(Department of Blanket Systems Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.162 Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR system code
-
Kun Xu
(School of Nuclear Sciences and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.163 Safety analysis of the helium cooling system for the HCSB blanket of CFETR
-
Shuai Wang
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.164 Thermo-Mechanical Analysis of the support component Between TBM and TBM-shield
-
Seong Dae Park
(Korea Atomic Energy Research Institute (KAERI))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.165 Accident Analysis on LOCA in HCCR-TBS towards CCWS-1
-
Mu-Young Ahn
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.166 Development of the real-scale helium circulator for the HCS of HCCR-TBS
-
Eo Hwak Lee
(KAERI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.167 Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement
-
Pietro Arena
(Dipartimento di Energia)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.168 Influence of modifications of HCLL blanket design on MHD pressure losses
-
Chiara Mistrangelo
(Institute for Nuclear and Energy Technologies)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.169 The current status and challenges of the PbLi cold trap development undertaken at CVR
-
Otakar Frybort
(Technical calculations department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.170 Helium bubble release from Pb-16Li within the Breeding Blanket
-
Michal Kordac
(TEO)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.171 Nuclear analysis of the HCLL blanket for the European DEMO
-
Jean-Charles Jaboulay
(Department of Systems and Structures Modelling)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.172 R&D activities and latest progress of dual functional lead lithium test blanket module
-
Qunying Huang
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.173 Repeatability of irradiation damage and of recovery by post-irradiation annealing of EUROFER base steels
-
Hans-Christian Schneider
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.174 ODS ferritic steels obtained by STARS, an innovative processing route without mechanical alloying
-
Nerea Ordas
(Materials and Manufacturing)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.175 Assessment of F82H development status toward DEMO with respect to the existing design code
-
Hiroyasu Tanigawa
(Department of Fusion Reactor Materials Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.176 Effect of irradiation hardening on deformation behavior of blanket structures fabricated by F82H
-
Takeshi Miyazawa
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.177 Characterization of F82H HIP joints by acoustic emission
-
Takashi Nozawa
(Japan Atomic Enegy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.178 Ion irradiation effects on microstructure and mechanical properties of VPS-W-coated F82H modified by FSP
-
Kazumi Ozawa
(Fusion Research and Development Directorate)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.179 Deformation of dissimilar-metals joint between F82H and 316L in impact tests after neutron irradiation
-
Haiying Fu
(Fusion System)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.180 Micro-pillar compression test on ion-irradiated F82H
-
Ryuta Kasada
(Institute of Advanced Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.181 Evaluation of Tensile Properties of F82H Welded Joint Using Small Punch Test
-
Toshiya Nakata
(Division of Industrial Innovation Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.182 Effects of mechanical alloying parameters on microstructure and impact properties of ODS ferritic steels
-
Noriyuki Y. Iwata
(National Institute of Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.183 Tensile properties of F82H steel after aging at 400 to 650°C for 30,000 h
-
Takuya Nagasaka
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.184 Ultrasonic testing of different shapes of support rib and lower bracket assembly weld joints
-
Yatinkumar Sarvaiya
(Quality Assurance)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.185 Long-lived radionuclide activity formed in ITER steel composites in 6Li-D converter neutron field
-
Władysław Pohorecki
(Faculty of Energy and Fuels)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.186 Study of Magnetic Properties of IWS Materials during Material and Component Manufacturing
-
Abha Maheshwari
(In Wall Shielding)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.187 Qualification of structural stainless steel products for the ITER correction coil cases
-
Stefano Sgobba
(CERN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.188 A comparison of properties of ARAA produced by VAR and ESR refining methods
-
Young-Bum Chun
(Nuclear Materials Development Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.189 Chemical compatibility between ARAA alloy in lithium meta-titanate breeder material
-
Seungyon Cho
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.190 Reheating cracking susceptibility in the weld heat-affected zone of reduced activation ferritic-martensitic steels
-
Joonoh Moon
(Ferrous Alloy Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.191 Effect of Ti on microstructures and mechanical properties of reduced activation ferritic-martensitic (RAFM) steels
-
Jun Young Park
(Korea Institute of Materials Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.192 Sample holder design for effective thermal conductivity measurement of pebble-bed using laser flash method
-
Youngmin Lee
(NFRI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.194 Status and strategy of the study on the neutron irradiation damage of CLAM steel
-
Jingping Xin
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.195 Research Progress in Effect of Tantalum Element on Mechanical Performance of CLAM Steel
-
Shaojun Liu
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.196 Status and planning of ITER material activation experiments at JET
-
Lee Packer
(Nuclear Technology Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.197 EU DEMO safety and operating requirements. Issues and possible solutions
-
Sergio Ciattaglia
(Power Plant Physics & Technology Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.198 Gaps analysis for the DEMO safety research and development
-
Yican Wu
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.199 Environmental safety assessment for fusion reactor due to gaseous tritium release
-
Muyi Ni
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.200 Radiological impact mitigation of waste coming from the European Fusion Reactor DCLL DEMO
-
Raquel Garcia
(Power Engineering Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.201 Activation and decay heat analysis of the European DEMO blanket concepts
-
Tim Eade
(Culham Centre for Fusion Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.202 A comparison study of shutdown dose rate using R2S and D1S method in K-DEMO
-
Jae Hyun Kim
(Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.203 Neutron activation in heat transfer systems of nuclear fusion devices
-
Andrius Tidikas
(Laboratory of Nuclear Installation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.204 Methodology of the Source Term estimation for DEMO Rector
-
Guido Mazzini
(Nuclear Safety Research Section)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.205 Development and identification of detritiation techniques for DEMO radioactive waste management
-
Lucie Karaskova Nenadalova
(Nuclear Fuel Cycle)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.206 Disposal Procedure for contaminated surface of tritium handling facility in the decommissioning operation
-
Toshiharu Takeishi
(Applied Quantum Physics and Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P1.207 Environmental impact of nuclear fusion biomass gasification plant
-
Shutaro Takeda
(Institute of Advanced Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
16:00
|
--- Coffee break ---
|
16:40
|
O1A
(until 18:00)
(Congress Hall 2nd floor)
|
16:40
|
O1A.1 Tritium modeling in HCPB breeder blanket at a system level: a preliminary parametrical approach
-
Elisabetta Carella
(National Fusion Laboratory)
(Congress Hall 2nd floor)
|
17:00
|
O1A.2 Progress of R&D on advanced tritium breeders for BA activity in EU and Japan
-
Tsuyoshi Hoshino
(Breeding Functional Materials Development Group)
(Congress Hall 2nd floor)
|
17:20
|
O1A.3 Design and R&D Activities of Fusion Breeder Blankets in China
-
Jie Yu
(Key Laboratory of Neutronics and Radiation Safety)
(Congress Hall 2nd floor)
|
17:40
|
O1A.4 WCLL breeding blanket design and integration for DEMO 2015: status and perspectives
-
Alessandro Del Nevo
(ENEA CR Brasimone)
(Congress Hall 2nd floor)
|
16:40
|
O1B
(until 18:00)
(Meeting Hall I 1st floor)
|
16:40
|
O1B.1 Uncertainties in power plant design point evaluations
-
Hanni Lux
(CCFE)
(Meeting Hall I 1st floor)
|
17:00
|
O1B.2 Long pulse and high performance discharges in KSTAR in preparing for ITER and beyond
-
Yeong-Kook Oh
(KSTAR Research Center)
(Meeting Hall I 1st floor)
|
17:20
|
O1B.3 Design of machine upgrades for the RFX-mod experiment
-
Simone Peruzzo
(Consorzio RFX)
(Meeting Hall I 1st floor)
|
17:40
|
O1B.4 Manufacturing of the JT60-SA cryostat vessel body cylindrical section
-
Jose Botija
(Fusion National Laboratory)
(Meeting Hall I 1st floor)
|
16:40
|
O1C
(until 18:00)
(Meeting Hall V 2nd floor)
|
16:40
|
O1C.1 Characterization of the ITER CS conductor and projection to the ITER CS performance
-
Nicolai Martovetsky
(US ITER)
(Meeting Hall V 2nd floor)
|
17:00
|
O1C.2 Initial Operation of 3 MW Dual Output High Voltage Power Supply with IC RF System
-
N. P. Singh
(ITER-India)
(Meeting Hall V 2nd floor)
|
17:20
|
O1C.3 Results of the first JT-60 SA TF coils tests in the Cold Test Facility
-
Walid Abdel Maksoud
(CEA)
(Meeting Hall V 2nd floor)
|
17:40
|
O1C.4 Effect of cycling load on performance of strands made by twisted-stacks of HTS tapes
-
Nikolay Bykovsky
(Swiss Plasma Center)
(Meeting Hall V 2nd floor)
|
18:30
|
--- Welcome reception ---
|
|
12:20
|
--- Lunch break ---
|
14:20
|
P2 Poster session
(until 16:00)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.001 3D effects of tokamak ferromagnetic core on magnetic field
-
Tomas Markovic
(Institute of Plasma Physics of the CAS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.002 Modelling and analysis of the JET EP2 neutral beam FEID curved end plate
-
Alastair Shepherd
(Culham Centre for Fusion Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.003 Technical rehearsal of DT operation at JET
-
Eva Belonohy
(JET Exploitation Unit)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.004 ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET
-
Rosaria Villari
(EUROfusion Consortium)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.005 The DTT device: alternative configurations
-
Roberto Ambrosino
(Engineering department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.006 DTT Device: Conceptual design of the superconducting magnet system
-
Alessandro Anemona
(ICAS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.007 The DTT device: systems for heating
-
Gustavo Granucci
(IFP-CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.008 The DTT device: plasma wall interaction issues
-
Giorgio Maddaluno
(FSN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.009 The DTT device: first wall, vacuum vessel and cryostat structure
-
Giuseppe Di Gironimo
(Department of Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.010 The DTT device: general layout
-
Giuseppe Mazzitelli
(Consorzio CREATE & Seconda Università di Napoli)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.011 The DTT device: power supply and electrical distribution system
-
Alessandro Lampasi
(Department of Fusion and Technology for Nuclear Safety and Security)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.012 Validation of RELAP-3D simulations of pressure wave propagation in the HCLL TBM
-
Marco Utili
(FSN-ING)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.013 He-FUS3 experimental campaign outcomes and RELAP5-3D analysis
-
Gianluca Barone
(Dipartimento di Ingegneria Civile e Industriale)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.014 Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation
-
Alessandro Venturini
(Department of Civil and Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.015 Particle density uniformity based global weight window generator in monte carlo particle transport simulation
-
Liqin Hu
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.016 Advanced Capabilities of Monte Carlo Program SuperMC for Fusion Application
-
Jing Song
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.017 Comparison of detritiation techniques for purely tritiated metallic waste
-
Michal Kresina
(DEN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.018 Pre-assembly and dimensional inspection at factory of JT60-SA Cryostat Vessel Body Cylindrical Section
-
Mercedes Medrano
(National Laboratory for Magnetic Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.019 Conceptual design of the JT-60SA pellet launching system
-
Peter Lang
(Tokamak Scenario Development Division (E 1))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.020 Feasibility study of a flux-gate magnetic field sensor suitable for ITER Neutral Beam Injectors
-
Nicolo Marconato
(Consorzio RFX (CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.021 Realization of a magnetically compensated extraction grid for performance improvement of next generation NBI
-
Daniele Aprile
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.022 Experimental characterization of the MITICA neutralizer gas injection nozzles
-
Stefan Hanke
(Institute for Technical Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.023 Final design of acceleration grid power supply conversion system of MITICA neutral beam injector
-
Loris Zanotto
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.024 Progress and further plans towards high power negative ion beams at ELISE
-
Bernd Heinemann
(ITER Technology & Diagnostics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.025 Preparation of the ELISE test facility for long-pulse extraction of negative ion beams
-
Riccardo Nocentini
(ITER Technology and Diagnostics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.026 Development of prototype elements for beamline components for ITER DNB and Indian test facility
-
Chandramouli Rotti
(Diagnostic Neutral Beam)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.027 Manufacturing technology development for an ‘Angled’ accelerator grid segment for Diagnostic Neutral Beam(DNB) source
-
Jaydeepkumar Joshi
(Diagnostic Neutral Beam (DNB))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.028 Progress on design and manufacturing of DC ultra-high voltage component for ITER NBI
-
Hiroyuki Tobari
(Naka Fusion Institution)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.029 Heating status and plasma performance in KSTAR
-
Jong-Gu Kwak
(NFRI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.030 Experimental results of helicon wave coupling using traveling wave antennas in KSTAR plasmas
-
Haejin Kim
(KSTAR Research Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.031 Design of high power traveling wave antenna for KSTAR helicon wave current drive
-
Hyunho Wi
(KSTAR Research center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.032 Development of 4-MW KSTAR LHCD system
-
Jeehyun Kim
(Heating and current drive team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.033 Mode Converters for Low-loss Transmission-line of KSTAR LHCD system
-
Taesik Seong
(Department of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.034 A Metamateral Load For The LH Range Of Frequency In Magnetized Plasmas
-
Julien Hillairet
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.035 Advanced Control of Neutral Beam Injected Power in DIII-D
-
Carl Pawley
(DIII-D)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.036 Power and Particle Deposition Modeling of DIII-D and EAST Neutral Beam Systems
-
Brendan Crowley
(DIII-D National Fusion Facility)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.037 Advances in technology and high power performance of the ECH system on DIII-D
-
Mirela Cengher
(General Atomics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.038 Integration of the state observer RAPTOR in the real-time MARTe framework at RFX-mod
-
Chiara Piron
(Consorzio RFX (CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.039 3D magnetic surfaces reconstruction in RFX-mod
-
Raffaele Martone
(Department of Industrial and Information Engineering, Seconda Università di Napoli, Aversa, Italy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.040 3D electromagnetic analysis of the MHD control system in RFX-mod Upgrade
-
Paolo Bettini
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.041 Modeling and mitigation of the magnetic field errors in RFX-mod Upgrade
-
Luca Grando
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.042 Development of Parallel Plasma Equilibrium Reconstruction in MAST
-
Zhengping Luo
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.043 Development of divertor scenario for heat mitigation method based on charge separation in VEST
-
Seongcheol Kim
(Department of Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.044 Plasma internal profile control using IDA-PBC: Application to TCV
-
Ngoc Minh Trang Vu
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.045 Architecture and platform of plasma control system T-15
-
Galina Kuzmina
(National Research Centre Kurchatov Institute, Moscow, Russian Federation)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.046 Improvements of magnetic measurements for plasma control in KSTAR tokamak
-
Heung-Su Kim
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.047 Conceptual study of fast-swept divertor strike points suppressing ELM heat flux
-
Jan Horacek
(Tokamak)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.048 Neutronics analysis for the ITER tritium and deposit monitor diagnostics
-
Arkady Serikov
(Institute for Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.049 Neutronics analysis of the in-vessel components of the ITER plasma-position reflectometry system
-
Raul Luis
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.050 Real-time software tools for the performance analysis of the ITER Radial Neutron Camera
-
Nuno Cruz
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.051 Nuclear Analysis of the ITER Radial Neutron Camera architectural options
-
Fabio Moro
(Department of Fusion and Nuclear Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.053 High resolution neutron spectrometer system for ITER
-
Anders Hjalmarsson
(Department of Physics and Astronomy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.056 2-mm microwave interferometer for COMPASS tokamak
-
Mykyta Varavin
(Institute of Plasma Physics AS CR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.057 Development and proof of concept measurements of the atomic beam probe diagnostic on COMPASS
-
Pavel Hacek
(Faculty of Mathematics and Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.058 Implementation of Rapid Imaging System on the COMPASS tokamak
-
Ales Havranek
(Institute of Plasma Physics of the CAS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.059 Fast infrared thermography on the COMPASS tokamak
-
Petr Vondracek
(Institute of Plasma Physics of the CAS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.060 Upgrade of the Compass tokamak microwave reflectometry system with I/Q modulation and detection
-
Jaromir Zajac
(Institute of Plasma Physics AS CR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.061 Automatic ELM detection using g-SPRT on different diagnostic signals from the COMPASS tokamak
-
Mark Szutyanyi
(Department of Mathematics and Computational Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.062 ArchiveDB WEB API: a web service for the experiment data archive of Wendelstein 7-X
-
Michael Grahl
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.063 A structural integrity monitoring tool for Wendelstein 7-X
-
Andre Carls
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.064 Visual diagnostics at Wendelstein 7-X Stellerator
-
Dirk Pilopp
(E4)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.065 Design and manufacturing progress of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring
-
Didier Chauvin
(CEA de Cadarache DSM/IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.066 Concept of C/O monitor diagnostic for stellarator W7-X
-
Ireneusz Ksiazek
(Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.067 A PCS7-based control and safety system for operation of the W7-X multi-purpose manipulator facility
-
Guruparan Satheeswaran
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.068 Software development for the simultaneous control of ten intelligent overview video cameras at W7-X
-
Tamas Szabolics
(Wigner Research Centre for Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.069 Conceptual design of multi-foils system for stellarator W7-X
-
Tomasz Fornal
(Department of Nuclear Fusion and Plasma Spectroscopy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.070 Commissioning and first operation of the pulse-height analysis diagnostic on Wendelstein 7-X stellarator
-
Natalia Krawczyk
(Department of Nuclear Fusion and Plasma Spectroscopy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.071 Implementation of the soft X-ray multi-camera tomography diagnostic in the Wendelstein 7-X stellarator
-
Christian Brandt
(Max-Planck-Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.072 Concept for calibrating the Rogowski coil system of the Wendelstein 7-X stellarator
-
Ulrich Neuner
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.073 A Multi-Purpose Manipulator system for W7-X as user facility for plasma edge investigation
-
Dirk Nicolai
(Institut für Energie- und Klimaforschung - Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.074 Spatial Distribution of Accumulated Neutron Emission in KSTAR
-
Youngseok Lee
(KSTAR Research Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.075 Zeff profile measurement system by using Thomson Polychromator
-
Jong-ha Lee
(National Fusion Research Institute (NFRI))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.076 Design of phase contrast imaging on the HL-2A tokamak
-
Y. Yu
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.078 Development of real-time display system to monitor plasma shape toward long-time discharge on QUEST
-
Md Mahbub Alam
(Advanced Energy Engineering Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.079 Final design of the diagnostic calorimeter for the negative ion source SPIDER
-
Andrea Rizzolo
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.080 Experimental investigation of beam-target neutron emission at the ELISE neutral beam test facility
-
Gabriele Croci
(Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.081 Design and Testing of Crowbar Protection System for the JT-60SA Superconducting Magnet Power Supplies
-
Zito Pietro
(FSN-FUSTEC-IEE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.082 Final tests of four switching network units procured by the European Union for JT-60SA
-
Miguel Pretelli
(Power Electronics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.083 Final Design of SiC-based Power Supply system for Resistive-Wall-Mode control in JT-60SA
-
Elena Gaio
(Power System)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.084 Design of JT-60SA cryodistribution
-
Kyohei Natsume
(Tokamak System Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.085 Completion of manufacturing of equilibrium field coils for the JT-60SA tokamak
-
Katsuhiko Tsuchiya
(QST)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.086 Status of casing manufacturing for JT-60SA toroidal field coils
-
Paolo Rossi
(ENEA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.087 Thermohydraulic and Quench Behaviour of the JT-60SA Toroidal Field Coil in Cold Tests Facility
-
Sylvie Nicollet
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.088 JT-60SA TF Coils procured by ENEA: an intermediate assessment
-
Gian Mario Polli
(FSN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.089 Performance of JT-60SA toroidal field coils in light of strand and conductor test results
-
Daniel Ciazynski
(IRFM/STEP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.090 Quench tests analysis of the first JT-60SA Toroidal Field coils
-
Yawei Huang
(Institute of Research into the Fundamental Laws of the Universe)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.091 Manufacturing and acceptance by CEA of the first JT-60SA TF coils
-
Patrick Decool
(CEA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.092 Metrology of an additively manufactured coil frame for stellarators
-
Vicente Queral
(National Fusion Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.093 Commissioning of the Wendelstein 7-X Quench-Detection-System
-
Matthias Schneider
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.094 The Wendelstein 7-X trim coil system commissioning and first operational results
-
Frank Fullenbach
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.095 Numerical investigation on the steady temperature rise of a by-pass switch
-
Sheng Li
(State Key Laboratory of Electrical Insulation and Power Equipment)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.096 Numerical investigation on the current commutation process of a quench protection switch
-
Qiaosen Wang
(State Key Laboratory of Electrical Insulation and Power Equipment)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.101 Design optimization of Normal Heat Flux First Wall panels for ITER
-
Tindaro Cicero
(Fusion for Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.102 Beryllium bonding pre-qualification for the ITER First Wall procurement in EU Domestic Agency
-
Stefano Banetta
(Fusion for Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.103 Measurement of residual stresses in simplified NHF First Wall Panel prototype during post-HIP processes
-
Rafael Enparantza
(Design)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.104 Analysis results of the EHF FW panel’s elements
-
Sergey Tomilov
(JSC “NIKIET”)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.106 Design, analysis and manufacturing of Enhanced First Wall Panel Electrical strap
-
Maxim Sviridenko
(JSC NIKIET)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.107 Radiative heat exchange of plasma-facing components
-
Karel Samec
(Centrum Výzkum ŘEŽ)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.108 Thermal-hydraulic design of water cooled first wall of the fusion reactor under DEMO conditions
-
Phani Domalapally
(Centrum výzkumu Řež s.r.o.)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.109 Heat transfer enhancement of the DEMO first wall water cooling
-
Pavel Zacha
(Energy Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.110 Design of the divertor targets shielding frame of the HELCZA experimental complex
-
Ladislav Vesely
(Faculty of Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.111 Optimization of the Electron Beam Irradiation at the HELLCZa Experiment
-
Radek Skoda
(Department of Energy Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.112 Commissioning phase of high heat flux test facility HELCZA
-
Richard Jilek
(Centrum výzkumu Řež s.r.o.)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.113 Model-based optimization of the heat flux distribution of IR-heaters for high heat flux testing
-
Andre Kunze
(Institute for Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.114 Design options to avoid deep cracking of tungsten armor at 20 MW/m2
-
Muyuan Li
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.115 Validation of TOKES vapour shield simulations against experiments in the 2MK-200 facility
-
Sergey Pestchanyi
(INR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.116 Actively cooled plasma-facing components and coolant removal system in KSTAR
-
Eunnam Bang
(KSTAR research center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.117 Analytical comparison of mock-ups with swirl and smooth tube for KSTAR divertor
-
Jaehyun Song
(Advanced Engineering Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.118 Preliminary analyses for electromagnetic loads of the K-DEMO divertor system
-
Sungjin Kwon
(DEMO Technology Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.119 R2S method based shutdown dose rate estimation on the K-DEMO equatorial port area
-
JongSung Park
(Fusion Engineering Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.120 Calculations on plasma radiation heat distribution on the first walls of the K-DEMO reactor
-
Kihak Im
(DEMO Technology Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.121 Detailed design and analysis of Wendelstein 7-X scraper element
-
G Douglas Loesser
(Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.122 Integration of uncooled scraper element and its diagnostics into Wendelstein 7-X
-
Joris Fellinger
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.123 Structural analysis of the W7-X cryopump during the superconducting coil fast discharge event
-
Zhongwei Wang
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.124 Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X
-
Patrick Junghanns
(Max-Planck-Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.125 Summary of the production of the production of the Wendelstein 7-X divertor target elements
-
Jean Boscary
(Max-Planck_Institut für Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.126 Progress status of the ITER Vacuum Vessel Sectors manufacturing design thermal hydraulic performance
-
Clara Colomer
(IDOM Nuclear Services)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.127 Electromagnetic Analysis for the In-Vessel Transfer Lines of Neutron Activation System
-
Sunil Pak
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.128 Analysis of a portable machine for post-welding operations within the vacuum vessel of ITER
-
Josu Eguia
(Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.129 Progress on the Design Development and Prototype Manufacturing of the ITER In-Vessel Coils
-
Anna Encheva
(Tokamak Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.130 Analysis and experimental justification of electrical connector for ITER blanket module
-
Ivan Poddubnyi
(JSC "NIKIET")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.131 Integration and mitigation aspects of the updated ITER ICH antenna shutdown dose rate analysis
-
Dieter Leichtle
(Fusion for Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.132 Engineering analysis of the DSM and PCSS@ISS of ITER upper ports #2 and #8
-
Ivan Popov
(Mechanics and Control)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.133 Engineering analyses of the upper vertical neutron camera of ITER
-
Pivkov Andrew
(Mechanics and Control)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.134 Application of fracture mechanical assessment to in-wall shield ribs in ITER vacuum vessel
-
Yu-Gyeong Kim
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.135 Components Design and Performance Analysis for the Preliminary Design of HCCR TBM-set
-
Dong Won Lee
(Nuclear Fusion Engineering Development Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.136 Multiphysics engineering analysis for high field side reflectometry
-
Aleksandr Nemov
(Peter the Great Saint-Petersburg Polytechnic University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.137 Divertor Thomson scattering structure integrity report
-
Ivan Kirienko
(Mechanics and controls)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.138 Electromagnetic Analysis for HL-2M RMP Coils In Vessel
-
Jiaming Jiang
(Fusion Center for Scientist)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.140 Thermal radiation analysis of DEMO tokamak
-
Bostjan Koncar
(Jožef Stefan Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.141 Structural analysis of demo divertor cassette body and design study based on rcc-mrx
-
Paolo Frosi
(Fusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.142 Propagation of decay gamma source uncertainties to dose rate in SDR calculations with R2SUNED
-
Juan-Pablo Catalan
(Energy Engineering Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.143 Investigation and Optimization of Molybdenum Disulfide Parameters for Low Friction Coating
-
Heejin Shim
(Blanket Technology Team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.144 Application of the VTTJ cold junction technique to fusion reactor relevant geometry and materials
-
Piero Agostinetti
(Consorzio RFX (CNR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.146 On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module
-
Pietro Alessandro Di Maio
(Energia)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.147 Dynamic thermal-hydraulic modeling of the EU DEMO breeding blanket cooling loops. Part II: WCLL
-
Antonio Froio
(NEMO Group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.148 CFD analysis of WCLL breeding blanket module design
-
Nicola Forgione
(DICI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.149 Thermal-Hydraulics CFD analysis of WCLL BB manifold
-
Emanuela Martelli
(DIAEE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.150 CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module
-
Alessandro Tassone
(Dipartimento di Ingegneria Astronautica)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.151 MHD flow and heat transfer in model geometries for WCLL blankets
-
Leo Buhler
(Institute for Nuclear and Energy Technologies)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.152 Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket
-
Maria Lorena Richiusa
(Department of Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.153 Consistent post-test analyses of LIFUS5 experiment
-
Marica Eboli
(DICI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.154 Conceptual design of the water cooled ceramic breeder blanket for CFETR
-
Songlin Liu
(Institute of Plasma Physics Chinese Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.155 Experimental study on the subcooled boiling in square channel
-
Hui Bao
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.156 Thermal-hydraulic responses of WCCB to the transient operation for CFETR
-
Kecheng Jiang
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.157 Activation analysis of CFETR WCCB blanket
-
Xiaokang Zhang
(Institute of Plasma Physics Chinese Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.158 Hydraulic analysis of the whole CFETR WSCB blanket module using CFD method
-
Pinghui Zhao
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.159 Phase change simulation of first wall in water-cooled breeding blankets for vertical displacement events
-
Geon-Woo Kim
(Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.160 Status of the engineering activities carried out on the European DCLL
-
Angel Ibarra
(CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.161 Transient thermal-mechanical analysis of fusion breeding blankets: Application to the European DCLL DEMO blanket
-
Luis Maqueda
(Esteyco Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.162 Preliminary system modelling for the EUROfusion Dual Coolant Lithium Lead blanket
-
Fernando Roca Urgorri
(National Fusion Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.163 Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO
-
Ivan Fernandez-Berceruelo
(Fusion National Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.164 Liquid metal heat and mass transfer coefficients in vertical ducts with flow channel inserts
-
Daniel Suarez
(Department of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.165 Numerical study of laminar buoyant MHD flows under non-uniform magnetic field
-
Qingyun He
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.166 Tritium and heat simultaneous non-contact recovery in vacuum
-
Fumito Okino
(Institute of Advanced Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.167 Numerical Model of Dual-Coolant Lead–Lithium (DCLL) Blanket
-
Andrei Khodak
(Princeton Plasma Physics Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.170 Helium Cooling Systems for Indian LLCB TBM
-
Brijesh Kumar Yadav
(Institute for Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.171 Lead-lithium facility with superconducting magnet for MHD/HT tests on liquid metal breeder blanket
-
Denis Obukhov
(JSC "NIIEFA" (Efremov Institute))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.172 Water hydraulic experiment as a simulant for the molten salt blanket with metal powders
-
Takuya Goto
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.173 Progress in development and qualification of beryllium for ITER blanket first wall in Russia
-
Igor Kupriyanov
(Beryllium Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.174 SiC-fibre reinforced tungsten-based composites for divertor
-
Petra Jenus
(Department for Nanostructured Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.175 Tungsten carbide particles-reinforced tungsten for divertor
-
Sasa Novak
(Department for Nanostructured Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.176 “FAST brazing” technology for W multi-metal laminates
-
Andrei Galatanu
(National Institute of Materials Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.177 Self-passivating tungsten alloys of the system W-Cr-Y: characterization and testing
-
Carmen Garcia-Rosales
(Materials Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.179 The study of irradiation defects structure in tungsten: stability for the self-interstitial
-
Min Pan
(Key Laboratory of Advanced Technology of Materials (Ministry of Education))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.180 Structural and micromechanical investigation of multi compositional tungsten thin film alloys produced by magnetron sputtered co-deposition process
-
Vladica Nikolic
(Erich Schmid Institute of Materials Science of the Austrian Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.181 Cu-based composites as thermal barrier materials in DEMO divertor components
-
Magdalena Galatanu
(National Institute of Materials Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.182 Thermal conductivity and diffusivity of Cu-Y alloys produced by different powder metallurgy routes
-
Gabriel Carro
(Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.183 Application of Friction Stir Processing for Mechanically Strengthening Pure-Cu and CuCrZr alloy
-
Dai Hamaguchi
(Fusion Research and Development Directorate)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.184 Development of Oxide dispersion strengthened-Copper using MA-HIP process
-
Hiroyuki Noto
(National Institute for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.185 Characterization of HIP joints of a simplified prototype of ITER NHF First Wall Panel
-
Inigo Iturriza
(Materials and Manufacturing)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.186 Diffusion welding methods at Plasma Facing Components in fusion reactor environment
-
Teteny Baross
(WIGNER RCP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.187 Study on the optimization of Cu/SS explosion bonding for ITER first wall components
-
Pinghuai Wang
(Southwestern Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.188 Potential improvements of W-Eurofer first wall brazed joint using alloyed powders filler
-
Javier de Prado
(Materials Science and Engineering Area)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.190 Spinel based optical materials for fusion applications
-
Eduard Feldbach
(Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.191 Investigation of repetitive cleaning of first mirror using radio frequency plasma
-
Jiao Peng
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.192 The consequences of fundamental design choices for DEMO
-
Richard Kembleton
(Culham Centre for Fusion Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.193 A comparative study on two DEMO-relevant test blanket modules
-
Dagui Wang
(Institute of Nuclear Energy Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.194 Time-dependent power requirements for pulsed fusion reactors
-
James Morris
(Power Plant Technology Group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.195 Dynamic modelling of a water-cooled blanket and energy storage options for a pulsed DEMO
-
Christopher Harrington
(Culham Centre for Fusion Energy (CCFE))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.196 Analysis of the secondary circuit of the DEMO fusion power plant using GateCycle
-
Monika Lewandowska
(Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.197 Study of the Cooling Systems with S-CO2 for the DEMO Fusion Power Reactor
-
Vaclav Dostal
(Energy engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.198 Preliminary safety analysis of LOCAs in one EU DEMO HCPB blanket module
-
Xue Zhou Jin
(Institute of Neutron Physics and Reactor Technology (INR))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.199 Parametric explorative study of DEMO galleries pressurization in case of ex-vessel LOCA
-
Danilo Dongiovanni
(FSN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.200 Effective water cooling of very hot surfaces during the LOCA accident
-
Jan Stepanek
(Department of Energy Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.201 Qualification of MELCOR and RELAP5 nodalization models for EU HCPB TBS accident analyses
-
Dobromir Panayotov
(ITER Department, Fusion for Energy (F4E), Torres Diagonal Litoral B3, Barcelona, E-08019, Spain)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.202 Simulation experiment on pressure shock waves under blanket in-box LOCA
-
Danna Zhou
(Institute of Nuclear Energy Safety Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.203 Accident analysis of helium cooled ceramic breeder test blanket system
-
Jiangtao Jia
(Key Laboratory of Neutronics and Radiation Safety)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.204 Methodology for the improvement of the AINA code wall-model applied to DEMO-WCPB blanket
-
Marco Fabbri
(Fusion Energy Engineering Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.206 Laser-driven accelerator of intense plasma beams for materials research
-
Agnieszka Zaras-Szydłowska
(Institute of Plasma Physics and Laser Microfusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.207 Guiding of laser beam in magnetized quantum plasma
-
Punit Kumar
(Department of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.208 Evolution of calorimetry methodology for beam current measurement of the LIPAc
-
Koichi Nishiyama
(IFMIF/EVEDA Project Team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P2.209 RF power tests of rf input coupler for the IFMIF/EVEDA RFQ prototype linac
-
Sunao Maebara
(Rokkasho Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
16:00
|
--- Coffee break ---
|
16:40
|
O3A
(until 18:00)
(Congress Hall 2nd floor)
|
16:40
|
O3A.1 Topology design of the in-vessel ITER plasma-position reflectometry antennas
-
Hugo Policarpo
(IPFN - Instituto de Plasmas e Fusão Nuclear)
(Congress Hall 2nd floor)
|
17:00
|
O3A.2 Current status of the design of the ITER bolometer diagnostic
-
Hans Meister
(ITER Technology & Diagnostics)
(Congress Hall 2nd floor)
|
17:20
|
O3A.3 Model identification of the temperature on the FTU liquid lithium limiter
-
Claudia Corradino
(DIEEI)
(Congress Hall 2nd floor)
|
17:40
|
O3A.4 System level design of the ITER Equatorial visible/infrared Wide Angle Viewing System
-
Laurent Letellier
(IRFM)
(Congress Hall 2nd floor)
|
16:40
|
O3B
(until 18:00)
(Meeting Hall I 1st floor)
|
16:40
|
O3B.1 The JET Materials Detritiation Facility for reducing radioactive waste liabilities
-
Stephen Reynolds
(Power and Active Operations)
(Meeting Hall I 1st floor)
|
17:00
|
O3B.2 Options for a high heat flux enabled helium cooled first wall for DEMO
-
Frederik Arbeiter
(Institute for Neutron Physics and Reactor Technology)
(Meeting Hall I 1st floor)
|
17:20
|
O3B.3 SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests
-
Carlota Soto
(Departament of Materials)
(Meeting Hall I 1st floor)
|
17:40
|
O3B.4 Effects of simultaneous neutron irradiation and helium injection on microstructure evolution of PM2000
-
Charles Henager
(Pacific Northwest National Laboratory, Richland, WA, United States)
(Meeting Hall I 1st floor)
|
16:40
|
O3C
(until 18:00)
(Meeting Hall V 2nd floor)
|
16:40
|
O3C.1 ITER Neutral Beam Remote Cutting & Welding Development
-
Luke Thomson
(RACE)
(Meeting Hall V 2nd floor)
|
17:00
|
O3C.2 Overview of remote handling technologies development in China
-
Damao Yao
(Institute of plasma physics)
(Meeting Hall V 2nd floor)
|
17:20
|
O3C.3 Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies
-
Jonathan Keep
(RACE)
(Meeting Hall V 2nd floor)
|
17:40
|
O3C.4 Assessment of navigation technologies for autonomous vehicles in nuclear fusion facilities
-
Rodrigo Ventura
(Institute for Systems and Robotics)
(Meeting Hall V 2nd floor)
|
20:00
|
--- Concert ---
|
|
12:20
|
--- Lunch break ---
|
13:30
|
--- Technical and cultural tours ---
|
|
12:20
|
--- Lunch break ---
|
14:20
|
P4 Poster session
(until 16:00)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.001 Vacuum pumping system of neutal beam injector in KSTAR
-
Kwang-Pyo Kim
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.002 Development of the new KSTAR helium distribution box
-
Young-Ju Lee
(Vacuum & cryogenic engineering team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.003 Systems code studies on the optimisation of design parameters for a DEMO tokamak reactor
-
Wolfgang Biel
(Institute for Energy and Climate Research IEK-4 (Plasma Physics))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.004 Practical study of optimizing the cool-down scenario for the KSTAR helium refrigeration system
-
Dong-Seong Park
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.005 Issues of arc discharge for long pulse KSTAR NBI
-
Wook Cho
(Heating and Current Drive Research Team)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.006 Development of pellet injection system for KSTAR
-
Soo-Hwan Park
(Advanced Technology Research Center)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.007 Final design and prototyping of the SPIDER caesium ovens
-
Michela De Muri
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.008 SPIDER beam source procurement: manufacturing and assembly at the factory
-
Mauro Pavei
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.009 SPIDER Gas injection and Vacuum System: from design to site acceptance test
-
Samuele Dal Bello
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.010 Speeding up predictive electromagnetic simulations for tokamak application
-
Sergei Sytchevsky
(JSC «NIIEFA»)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.011 Modelling magnetic effects for steel rebar of tokamak buildings
-
Boris Lyublin
(JSC "NIIEFA")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.012 Control strategy for mitigation of pulsed heat power transferred to cryoplant from superconducting magnets
-
Ilya Gornikel
(Alphysica GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.013 Fault energy dump & repeated breakdown validations of HVPS commissioned for negative ion source-ROBIN
-
Mahesh Vuppugalla
(Institute for Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.014 Progress in Development of Pellet Injector Technology in India
-
Jyoti Shankar Mishra
(Institute for plasma research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.015 Developments in pellet injection technology for transient mitigation applications
-
Larry Baylor
(Oak Ridge National Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.016 Ignitor siting at the TRINITI site in Russian Federation
-
Massimo Zucchetti
(DENERG)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.017 Feasibility study for an advanced nuclear fusion experiment
-
Dario Andres Cruz Malagon
(DENERG)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.018 Design of rotating resonant magnetic perturbation coil system in the STOR-M tokamak
-
Sayf Elgriw
(Department of Physics and Engineering Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.019 EU DEMO transient phases: main constraints and heating mix studies for ramp-up and ramp-down
-
Pietro Vincenzi
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.020 Heating & Current Drive Efficiencies, TBR and RAMI considerations for DEMO
-
Thomas Franke
(EUROfusion Consortium)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.021 Multi-design innovative cooling research & optimization (MICRO):novel proposals for high performance cooling in DEMO
-
Giulio Gambetta
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.022 Numerical and semianalytical treatments of neutral beam current drive in DEMO-FNS
-
Alexey Dnestrovskiy
(Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.023 Progress on the ENEA 500 kW, 250 GHz CARM design
-
Ivan Spassovsky
(Fusion Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.024 Traditional vs. advanced Bragg reflectors for oversized circular waveguide
-
Silvio Ceccuzzi
(FSN - Fusion Physics Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.025 Integrating a distributed antenna in DEMO: requirements and challenges
-
Amro Bader
(Tokamak Scenario Development Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.026 Development of an arc ion source based on Marx generator for VEST NBI system
-
Bongki Jung
(Nuclear Fusion Engineering Development Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.027 Design of an impedance matching circuit for a high power rectangular RF ion source
-
Sung-Ryul Huh
(Nuclear Fusion Engineering Development Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.028 Requirements and modelling of fast particle injection in RFX-mod tokamak plasmas
-
Matteo Vallar
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.029 Beam transmission dependence on beam parameters for TJ-II Neutral Beam Injectors
-
Macarena Liniers
(Laboratorio Nacional de Fusión)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.030 The latest progress of the 1st 5MW-NBI beamline on HL-2M
-
Liu He
(NBI Group)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.031 H- extraction for development of a cesium free negative ion source using sheet plasma
-
Takuya Hase
(Tokai University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.032 Response of H- ions to extraction field in a negative hydrogen ion source
-
Shaofei Geng
(Department of Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.034 Design of high power RF amplifier for 3 MW/CW transmission line test rig
-
Raghuraj Singh
(IC H&CD)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.035 Development of wideband solid state power amplifier for ICH & CD RF source
-
Manojkumar Patel
(ICH&CD)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.036 Commissioning and first results of the reinstated JET ICRF ILA antenna
-
Pierre Dumortier
(LPP-ERM/KMS)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.037 ITER-like antenna for JET first results of the advanced matching control algorithms
-
Frederic Durodie`
(Laboratory for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.038 Neutral beam injection system for the C-2U field reversed configuration experiment
-
A. Dunaevsky
(Tri Alpha Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.039 Inverse heat flux evaluation from thermographic measurements in SPIDER
-
R.S. Delogu
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.040 Optimization of ITER poloidal field coil currents at initial magnetization phase
-
Laurent Jung
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.041 Neural network implementation for ITER neutron emissivity profile recognition
-
Marco Cecconello
(Uppsala University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.042 Preliminary Exception Handling Analysis for the ITER Plasma Control System
-
Gerhard Raupp
(Tokamak Scenario Development E1)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.043 Towards a preliminary design of the ITER Plasma Control System architecture
-
Wolfgang Treutterer
(E1)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.044 3D analysis of magnetic lines variations at breakdown due to error fields in ITER
-
Alessandro Formisano
(Dept. of Industrial and Information Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.045 Comparison of three methods for the solution of eddy current problems in fusion devices
-
Ruben Specogna
(DPIA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.046 Interface challenges as part of the ITER plasma control system design
-
Luca Zabeo
(ITER Organization)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.047 Experiments on actuator management and integrated control at ASDEX Upgrade
-
Christopher James Rapson
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.048 Real-Time reflectometry - an ASDEX Upgrade DCS plugin-App for plasma position and shape control
-
Jorge M. Santos
(Instituto de Plasmas e Fusao Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.049 Development of the control algorithm for advanced divertor configuration
-
Jiaxian Li
(Center for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.050 Laser-induced Fluorescence for ITER Divertor Plasma
-
Alexey Gorbunov
(NRC Kurchatov Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.051 Testing of uncooled sandwich molybdenum mirrors for H-alpha and visible spectroscopy in ITER
-
Ilya Orlovskiy
(NRC "Kurchatov Institute")
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.052 Fiber optics for plasma diagnostics in ITER
-
Konstantin Vukolov
(Kurchatov Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.053 Optimization of optical dumps for H-alpha spectroscopy in ITER
-
Evgeny Andreenko
(NRC “Kurchatov institute”)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.054 Investigations on camera integration and data acquisition architecture for the ITER equatorial Vis/IR diagnostic
-
Vincent Martin
(Bertin Technologies)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.055 Load specification and vibration test of the ITER equatorial port H-alpha diagnostic dogleg mirror
-
Sven Gutruf
(Kampf Telescope Optics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.056 Design & analysis process and implications on the optical performance
-
Arnd Reutlinger
(Kampf Telescope Optics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.057 The UWAVS R&D and design efforts for ITER
-
Matthew Smiley
(General Atomics MFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.058 Hardware solutions for ITER divertor thomson scattering
-
Eugene Mukhin
(Ioffe Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.059 Radiation shielding design evaluation for detectors of ITER VUV Edge Imaging Spectrometers
-
YoungHwa An
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.060 ITER Core CXRS diagnostic: Assessment of different optical designs with respect to Neutronics criteria
-
Bastian Weinhorst
(Institute for Neutron Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.061 JUVIL: A New Innovative Software Framework for Data Analysis of JET Imaging Systems
-
Valentina Huber
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.062 Pre-Emptive Data Caching Infrastructure for Data Centric Analysis and Modelling
-
Ivan Lupelli
(UKAEA-CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.063 Boosting learning for robust classification of TJ-II nuclear fusion databases
-
Gonzalo Farias
(Escuela de Ingenieria Electrica)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.064 The "voiceprint" of a tokamak and its application in monitoring
-
Yi Tan
(Department of Engineering Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.065 90 degrees cylindrical energy analyzer for the plasma potential fluctuations measurements on the tokamak ISTTOK
-
Igor Nedzelskiy
(Instituto de Plasmas e Fusao Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.066 Dependence of LIBS spectra on the surface composition and morphology of W/Al coatings
-
Matti Laan
(Institute of Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.067 Improving accuracy of Penning gauge spectroscopy for the determination of hydrogen isotope H/D ratios
-
Gennady Sergienko
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.068 Multichannel measurement system for extended SXR plasma diagnostics based on novel radiation-hard electronics
-
Andrzej Wojenski
(Institute of Electronic Systems)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.069 Advanced probe for transport measurements in medium-size tokamaks
-
Bernd Sebastian Schneider
(Institute for Ion Physics and Applied Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.070 Coinciding signals estimation for high flux radiation in GEM detector for fusion plasma imaging
-
Tomasz Czarski
(Institute of Plasma Physics and Laser Microfusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.071 Development of GEM detector for tokamak SXR tomography system: preliminary laboratory tests
-
Maryna Chernyshova
(Institute of Plasma Physics and Laser Microfusion)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.072 Validation of 23Na(n,2n) cross section as neutron flux monitor in D-T fusion reactors
-
Evzen Losa
(Research Centre Rez)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.073 Electromagnetic properties of some comercial REBaCuO superconducting tapes considered for magnets of fusion reactors
-
Milos Jirsa
(Institute of Physics ASCR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.075 Influence of twisting strain on the Bi-2212 tapes and round wires under background field
-
Xinsheng Yang
(Southwest Jiaotong University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.076 Soft real-time analysis of ITER magnetics streaming data using SPECTRE
-
Jonathan Hollocombe
(Theory and Modelling)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.077 Status of the development of diagnostic pressure gauges for the operation in ITER
-
Alexey Arkhipov
(Max-Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.078 Experimental and numerical studies of the shutter dynamics for the ITER core CXRS diagnostic
-
Sebastian Friese
(Institut für Energie- und Klimaforschung)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.079 ITER UWAVS first mirror plasma cleaning prototype development
-
Andrey Ushakov
(TNO)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.080 New piezoelectric valve for disruption mitigation studies at ASDEX Upgrade
-
Mathias Dibon
(Max-Planck-Institute for Plasmaphysics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.081 Pressure gauge filament for neutral gas density measurement using alternating current as source power
-
Nikola Jaksic
(Max Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.082 Experiment of Joints Resistance and Critical Current of Bi-2212 Conductor
-
Fang Liu
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.083 Standardization of the hard- and software used to operate manipulators at ASDEX Upgrade
-
Pascal de Marne
(Max-Planck-Institut fuer Plasmaphysik)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.084 The irradiation damage assessment on TF coil in CFETR with HCSB blanket
-
Qin Zeng
(School of Nuclear Science and Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.085 Progress in the new EAST magnet feeders
-
Weibin Xi
(Tokamak Design Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.086 X-mode raw data analysis of the new AUG ICRF antenna edge density profile reflectometer
-
Diogo Eloi Aguiam
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.088 Automatic pattern recognition on electrical signals applied to Neutron-Gamma discrimination
-
Fabio Pollastrone
(FSN (Nuclear Fusion and Fission and Related Technologies Department))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.090 An assessment of axial pre-compression for the KSTAR central solenoid
-
Hee-Jae Ahn
(NFRI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.091 Optimizing BUSSARD, the new 16-phase inverter system of ASDEX Upgrade
-
Markus Teschke
(E1 - tokamak scenario development)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.093 The DC-link of the inverter system BUSSARD for ASDEX Upgrade in vessel saddle coils
-
Nils Arden
(Max-Planck Institute for Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.094 Study on 300MVA pulse generator starting system
-
Wang HaiBing
(Center for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.095 Development of 300 MVA Motor Generator in HL-2M
-
Jianfei Peng
(Tokamak Power Supply Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.097 Development of a quasi-steady state high voltage power supply based on Marx generator
-
Shouzhi Wang
(Department of Engineering Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.101 High heat flux testing of newly developed tungsten components for WEST
-
G. Pintsuk
(Forschungszentrum Jülich GmbH)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.103 Critical heat flux of water-subcooled flow in swirl tube with rail-type twisted tape
-
Youngjae Park
(Department of Nuclear Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.104 Heat flux test and cooling effect of tungsten brazed mockup with swirl tube
-
Kyung-Min Kim
(National Fusion Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.105 Thermal-lifetime Analysis of Tungsten Coated Plasma Facing Component
-
Dong Jun Kim
(Korea Atomic Energy Research Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.106 High heat flux test facility KoHLT-EB and development of plasma facing components in Korea
-
Suk-Kwon Kim
(Nuclear Fusion Engineering Development Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.107 Numerical simulation on coupled thermal fatigue behavior of first wall in fusion reactor
-
Shenghong Huang
(Modern mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.108 Design and development of high pressure high temperature water circulation system for HHFTF
-
Rajamannar Swamy Kidambi
(Divertor & First Wall Technology Development Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.110 Development of Simulation Method for Predicting Tungsten Behavior Loaded by High Heat Flux
-
Kohei Hamaguchi
(Division of Sustainable Energy and Environmental Engneering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.111 Feasibility study of fabrication of large scale mock-up and strength evaluation of HIP joint
-
Ryuji Ohsone
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.112 Experimental simulation of super-X divertor for detached plasma by TPD-Sheet IV
-
Toshikio Takimoto
(Tokai University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.113 Progress in design and prototyping activities for the Material Plasma Exposure Experiment
-
Arnold Lumsdaine
(Oak Ridge National Laboratory)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.114 Critical processing considerations for ITER first wall beryllium tiles
-
Keith Smith
(Materion Beryllium and Composites Elmore, OH, United States)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.115 Tritium measurement for tungsten deposition layer by imaging plate technique after tritium gas exposure
-
Mizuki Noguchi
(Advanced Energy Engineering Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.116 Study of tritium and helium generation and release from lithium-containing materials
-
Irina Tazhibayeva
(Insitute of Atomic Energy NNC RK)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.117 Low temperature deuterium release from lithium films
-
Alexey Popkov
(Plasma Physics Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.118 Retention and transmission properties of deuterium in tungsuten by the divertor simulator TPD-Sheet IV
-
Fumitaka Ishikawa
(Tokai University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.119 Virtual prototyping tools for the JET divertor
-
Daniel Iglesias
(UKAEA-CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.120 Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-Like Wall
-
Masayuki Tokitani
(Department of Helical Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.121 Formation of ammonia in N2 seeded discharges at AUG and JET
-
Aleksander Drenik
(EUROfusion Consortium)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.122 Optimization of the ASDEX Upgrade glow discharge system
-
Thomas Hartl
(E1)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.123 Investigations on tungsten heavy alloys for use as plasma facing material
-
Rudolf Neu
(Plasmarand und Wand)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.124 Microwave response of ITER diagnostic vacuum windows
-
Johan Oosterbeek
(Eindhoven University of Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.125 Investigation on feasibility of cleanliness assessment using test sample for ITER blanket shield block
-
Hun-Chea Jung
(ITER Korea)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.126 Blanket manifold final design and validation
-
Paul Edwards
(Tokamak Engineering Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.127 Accuracy improvement studies for remote maintenance manipulators
-
Yongbo Wang
(Lappeenranta University of Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.128 Recovery from failures of ITER Blanket Remote Handling System
-
Takahito Maruyama
(Department of ITER Project)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.129 Development of In-Vessel Pipe Welding Tool for ITER Blanket Remote Maintenance
-
Yuto Noguchi
(Fusion Research and Development Directorate)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.130 Development of a prototype work-cell for validation of ITER remote handling control system standards
-
Naveen Rastogi
(Remote Handling Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.131 ITER Hot Cell – Remote Handling System maintenance overview
-
Jean-Pierre Friconneau
(ITER)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.133 Irradiation tests of radiation hard components for ITER blanket remote handling system
-
Makiko Saito
(Naka Fusion Institute)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.134 A hybrid DE and PSO algorithm for numerical solution of remote maintenance manipulators
-
Bingyan Mao
(Laboratory of Intelligent Machines)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.135 Assessment of unmanned aerial vehicles for reactor inspection
-
Paulo Carvalho
(Instituto de Plasmas e Fusao Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.136 Robust grasping motion control with force feedback for EAMA robot in fusion tokamak application
-
Huapeng Wu
(Lappeenranta university of technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.137 Operators' accessibility studies using virtual reality
-
Cephise Louison
(IRFM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.138 Status and Developments of the MASCOT telemanipulator system for JET Remote Maintenance
-
Tom H. Owen
(Remote Applications in Challenging Environments (RACE))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.140 Application of Ultrasonic technology in CFETR vacuum vessel R&D
-
Wang Rui
(Institute of Plasma Physics Chinese Academy of Sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.141 Research of NG-TIG welding technology on full-scale sector prototype of CFETR vacuum vessel
-
Jianguo Ma
(Institute of Plasma Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.142 A Study on Assembly Technology of the CFETR 1/32 Vacuum Vessel
-
Zhihong Liu
(instititue of plasma physics chinese academy of sciences)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.143 R&D activities of tritium technology on the broader approach in phase 2
-
Kanetsugu Isobe
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.144 Hydrogen inventory control for vanadium alloy by metal powder mixing in molten salt
-
Juro Yagi
(Department of Helical Plasma Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.145 Numerical simulation of purge gas flow in binary pebble beds based on DEM-CFD method
-
Youhua Chen
(University of Science and Technology of China)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.146 Analysis of low pressure hydrogen separation from fusion exhaust gases by means of superpermeability
-
Benedikt J. Peters
(Institute for Technical Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.147 On the study of catalytic membrane reactor for water detritiation: effect of reactions kinetics
-
Karine Liger
(CEA Cadarache)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.148 The coolant purification system in DEMO: candidate technologies, requirements and interfaces
-
Alessia Santucci
(ENEA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.149 Processing of Plasma Enhancement Gases through ceramic membranes
-
Silvano Tosti
(ENEA)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.150 Heavy water decontamination tests through a Pd-membrane reactor
-
Marco Incelli
(DEIM)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.151 Perspectives of the Vacuum Sieve Tray method to extract tritium from Pb-16Li at TLK
-
Laetitia Frances
(ITEP)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.152 Effect of halogenated gas on detritiation efficiency of the detritiation system
-
Yasunori Iwai
(Department of Blanket Systems Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.153 Hydrogen isotope delivery performance of a DU hydride bed under various preheating scenarios
-
Kwangjin Jung
(University of Science and Technology (UST))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.154 Relationship between hydrogen isotope recovery and inner temperature of a DU bed
-
Yeanjin Kim
(quantum energy chemical engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.155 Dynamic simulation of a multicomponent distillation column for D-T separation
-
Alina Niculescu
(National Institute for Cryogenics and Isotopes Technologies - ICSI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.156 Investigation of some critical scenarios due to various failures of ICSI Cryogenic Distillation System
-
George Ana
(National Institute for Cryogenics and Isotopes Technologies - ICSI)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.157 Gas distribution system manifold design for ITER gas injection system
-
Tao Jiang
(Center for Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.158 State of the art and perspective of high-speed pellet injection technology
-
Francesca Bombarda
(FSN Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.159 Pellet injectors for EAST and KSTAR tokamaks
-
Igor Vinyar
(PELIN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.160 Modeling and simulation of time-dependent gas pumping scenarios in ITER
-
Dimitris Valougeorgis
(Mechanical Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.161 An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets
-
Antonio Frattolillo
(ENEA C.R. Frascati)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.162 Dynamic model of ITER cryo-pumps cryogenic distribution system: torus pumping and regeneration scenarios
-
Silvio Giors
(Plant Engineering Department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.163 Development of Cryoadsorption Cryopump & its Related Auxiliary Technologies in India
-
Ranjana Gangradey
(Development of cryopump and pellet injector system)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.164 Mercury ring pump proof-of-principle testing in the THESEUS facility
-
Thomas Giegerich
(Institute for Technical Physics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.165 Amperometric hydrogen sensors for molten metals
-
Jordi Abella
(Analytical and Applied Chemistry)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.166 Development of advanced hydrogen permeation sensors to measure Q2 concentration in lead-lithium eutectic alloy
-
Luigi Candido
(Department of Energy)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.168 Improvement of quantitative analysis method of tritium using hydrophobic catalyst
-
Yuki Edao
(Department of Blanket Systems Research)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.169 Tritium introduction module design for the JET tokamak
-
David Wilson
(CCFE)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.170 Operational aspects of the JET Tritium Introduction Modules
-
Ivo Carvalho
(Instituto de Plasmas e Fusão Nuclear)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.171 Enhanced Jet Stability For The Melt-Based Production Of Lithium Orthosilicate/Metatitanate Pebbles
-
Oliver Leys
(Institute for Applied Materials)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.172 The test cell configuration under IFMIF-DONES condition
-
Kuo Tian
(Karlsruhe Institute of Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.173 Measurement of Free-surface Lithium Flow using Laser Reflection Method
-
Sachiko Yoshihashi
(Department of Applied Nuclear Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.174 Numerical investigation of cavitation phenomena in the free surface liquid-lithium flow
-
Sergej Gordeev
(Institute for Neutronic Physics and Reactor Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.175 Cavitation upstream of liquid lithium target for intense fusion nuetoron source
-
Hiroo Kondo
(Japan Atomic Energy Agency)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.177 Numerical study on detailed flow structure inner high-speed liquid metal lithium jet
-
Eiji Hoashi
(Osaka University)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.178 Study on suppression of surface fluctuation of liquid Li jet by magnetic field
-
Takafumi Okita
(Division of Sustainable Energy and Environmental Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.179 Mechanical testing of the IFMIF HFTM-DC prototype during operation in the HELOKA-LP helium loop
-
Georg Schlindwein
(Institute for Neutron Physics and Reactor Technology (INR))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.180 Steady-state and transient thermal-hydraulic performance of the IFMIF High Flux Test Module
-
Christine Klein
(INR)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.181 Measurement of transient flow characteristics of target flow in water experiment for IFMIF
-
Shotaro Matsuda
(Division of Sustainable Energy and Environmental Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.182 Neutronics assessment of different quench tank location options in IFMIF-DONES
-
Yuefeng Qiu
(Karlsruhe Institute of Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.183 Manufacturing of the IFMIF HFTM double compartment prototype
-
Florian Schwab
(Institute for Neutron Physics and Reactor Technology (INR))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.184 The Conventional Facilities of the Linear IFMIF Prototype Accelerator (LIPAc)
-
Giuseppe Pruneri
(Fusion department)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.185 IFMIF bean dump front shielding residual dose study with SEACAB metholodogy
-
Pedro Ortego
(Neutronic Calculations)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.187 Numerical study on fluid dynamics of liquid metal breeder under magnetic field
-
Yuki Iwama
(Department of Sustainable Energy and Environmental Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.188 Modelling tritium permeation during PbLi capsule irradiation
-
Petr Stupka
(TEO)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.189 Monitoring of oxide layer structures in Pb and Pb-Li alloy by electrochemical impedance spectroscopy
-
Masatoshi Kondo
(Research Laboratory for Nuclear Reactors)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.190 Experimental loop and purification system design for corrosion in flowing PbLi
-
Daniele Martelli
(Department of Civil and Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.191 Absorption-Desorption Models for the Determination of Tranport Parameters of Hydrogen Isotopes in Eutectic PbLi
-
Gorka Alberro
(Nuclear Engineering and Fluid Mechanics)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.192 Lithium conducting ceramics for amperometric sensors in molten metals
-
Sergi Colominas
(Analytical Chemistry)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.193 Corrosion studies of nuclear fusion reactor materials in flowing nanofluid
-
Jiang Haiyan
(School of Materials Science and Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.195 ASTEC simulations of dust resuspension in fusion containments compared with the “STARDUST” experimental data
-
Fabio Tieri
(Fusion Nuclear Tecnologies)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.196 3D CFD Simulations of dust mobilisation in STARDUST-U facility
-
Jean-Francois Ciparisse
(Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.197 Imaging of dust mobilized inside STARDUST-Upgrade facility in case of loss of vacuum accidents
-
Luigi Antonio Poggi
(Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.198 The influence of dust characteristics on re-suspension: test with tungsten and data discussion
-
Andrea Malizia
(Industrial Engineering)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.199 Minimising Operator Neutron Dose During JET Shutdown using Virtual Reality
-
Jonathan Naish
(Technology)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.201 Neutronics study on HCCB blanket for CFETR
-
Zaixin Li
(Center For Fusion Science)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.202 Preliminary risks analysis of the IGNITOR Project realization phase
-
Mikhail Subbotin
(CERN)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.203 Neutronics analysis of a stellarator power reactor based on the HELIAS concept
-
Andre Haußler
(Institute for Neutron Physics and Reactor Technology (INR))
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.204 Economic assessment of different operational reactor cycle structures in a pulsed DEMO-like power plant
-
Chiara Bustreo
(Consorzio RFX)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.205 The Economic Benefits of Big Science R&D Program: With a Focus on KSTAR Program
-
Hyun Soo Tho
(Strategy Division)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
14:20
|
P4.206 The project & quality management activities in ENEA fusion department
-
Alexander Rydzy
(FSN-FUSTEC-TES)
(Foyer 2A (2nd floor), 3A (3rd floor))
|
16:00
|
--- Coffee break ---
|
16:40
|
O5A
(until 18:00)
(Forum Hall 2nd floor)
|
16:40
|
O5A.1 Current status of the EU DEMO Project on the inner fuel cycle systems
-
Christian Day
(Karlsruhe Institute of Technology (KIT))
(Forum Hall 2nd floor)
|
17:00
|
O5A.2 Fusion Reactor Start-up without an External Tritium Source
-
Shanliang Zheng
(CCFE)
(Forum Hall 2nd floor)
|
17:20
|
O5A.3 Recent developments in the TRIPOLI-4® Monte-Carlo code for fusion applications
-
Fadhel Malouch
(Den-Service d’études des réacteurs et de mathématiques appliquées (SERMA))
(Forum Hall 2nd floor)
|
17:40
|
O5A.4 Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions
-
Olivier Doyen
(Laboratoire des Technologies d’Assemblage)
(Forum Hall 2nd floor)
|
16:40
|
O5B
(until 18:00)
(Meeting Hall I 1st floor)
|
16:40
|
O5B.1 Post-irradiation high heat flux investigation of plasma facing components
-
Jochen Linke
(Forschungszentrum Jülich GmbH)
(Meeting Hall I 1st floor)
|
17:00
|
O5B.2 Radio-frequency design of a lower hybrid slotted waveguide antenna
-
Walid Helou
(CEA)
(Meeting Hall I 1st floor)
|
17:20
|
O5B.3 Design considerations for future DEMO gyrotrons: a review on related gyrotron activities within EUROfusion
-
John Jelonnek
(Institute for Pulsed Power and Microwave Technology (IHM))
(Meeting Hall I 1st floor)
|
17:40
|
O5B.4 Multi-section Traveling Wave Antenna for heating of large machines as DEMO
-
Riccardo Ragona
(Laboratory for Plasma Physics)
(Meeting Hall I 1st floor)
|
16:40
|
O5C
(until 18:00)
(Meeting Hall V 2nd floor)
|
16:40
|
O5C.1 First Operational Phase of the Superconducting Magnet System of Wendelstein 7-X
-
Konrad Risse
(W7-X Operation)
(Meeting Hall V 2nd floor)
|
17:00
|
O5C.2 Development and Commissioning of the Wendelstein 7-X Safety Control System
-
Andreas Werner
(Wendelstein 7-X Operation CoDaC)
(Meeting Hall V 2nd floor)
|
17:20
|
O5C.3 An optimized upper divertor with divertor-coils to study enhanced divertor configurations in ASDEX Upgrade
-
Albrecht Herrmann
(MPI für Plasmaphysik)
(Meeting Hall V 2nd floor)
|
17:40
|
O5C.4 Optimal current profile control for enhanced repeatability of L-mode and H-mode discharges in DIII-D
-
William Wehner
(Mechanical Engineering & Mechanics)
(Meeting Hall V 2nd floor)
|
19:30
|
--- Gala dinner ---
|
|
|